PINE64
Android 5.1.1 TV (old-stable, no longer maintained) - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Android on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=5)
+--- Thread: Android 5.1.1 TV (old-stable, no longer maintained) (/showthread.php?tid=2080)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

RE: Android TV with HDMI and 4K - ayufan - 08-27-2016

ChromeCast likely will not work, due to a fact that it requires HW-based signatures to requests a google signed certificate. This certificate is then validated by all Google Apps.

RE: Android TV with HDMI and 4K - Danton - 08-27-2016

The download page asks for a access key and / or secret key?

RE: Android TV with HDMI and 4K - ayufan - 08-27-2016

Danton: links are updated.

RE: Android TV with HDMI and 4K - Danton - 08-28-2016

(08-27-2016, 08:07 AM)ayufan Wrote: Danton: links are updated.

Thanks.

But I see that you removed the links and created a new file for only a 8GB SD card?

Sadly mine is 64GB.

RE: Android TV with HDMI and 4K - ayufan - 08-28-2016

Danton: it doesn't make difference. You can also install it on any other size. I use 64GB for development too.

RE: Android TV with HDMI and 4K - Danton - 08-28-2016

(08-28-2016, 09:43 AM)ayufan Wrote: Danton: it doesn't make difference. You can also install it on any other size. I use 64GB for development too.


(08-28-2016, 09:43 AM)ayufan Wrote: Danton: it doesn't make difference. You can also install it on any other size. I use 64GB for development too.

Ah ok! So I don't have to resize the partition?

Thanks for your help, I'm going to flash it immediately!  Cool

Added:

Ok I flashed the SD card and booted it up, but my TV doesn't display everything.
It starts with that I can't see which Wi-Fi network I'm selecting.

Fixed (sort of):

I rebooted the Pine and I think it adjusted itself to display the correct resolution.

Feedback :

4K does not display properly on my Philips PUK7100 TV, only the top half is used.

RE: Android TV with HDMI and 4K - ayufan - 08-28-2016

Yes, there's a problem with DPI after changing resolution. When you see a welcome screen you have to reboot Pine.
Danton: You probably have to reboot after changing resolution. There's also a problem of hardcoded DPI which may not make sense for 4K output. I'll check that on my TV. You can always change DPI with an app like: https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi&hl=en
Also a screenshot would be appreciated Smile
Danton: does HDMI CEC work?

RE: Android TV with HDMI and 4K - anarchyuk - 08-28-2016

For me I get the Android boot screen then what You See in the picture then it reboots and just loops 

[Image: IMAG0125.jpg]

RE: Android TV with HDMI and 4K - ayufan - 08-28-2016

Can you connect UART and see what is on the console?

RE: Android TV with HDMI and 4K - anarchyuk - 08-28-2016

I'll have a go in the morning see whats going on