Solid Model/Accurate Blueprint - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32) +---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14) +---- Thread: Solid Model/Accurate Blueprint (/showthread.php?tid=188) Pages:
1
2
|
RE: Solid Model/Accurate Blueprint - w1ntermute0 - 04-14-2016 (04-13-2016, 09:45 AM)Tarjei85 Wrote: It would be nice to have the power an reset buttons as well. Other than that. Thanks for the work Hah - I haven't soldered the one I got on yet - are those switches both the same momentary contact or are they different components? If someone has measurements now I could add them to the cad model, otherwise I'll have to measure later after I put it on. wm RE: Solid Model/Accurate Blueprint - norm24 - 04-14-2016 About this model it should be. Here is a step-file https://drive.google.com/open?id=0BwdGZcSqJ4nOVjNzaWJRRkRzWW8 RE: Solid Model/Accurate Blueprint - knightridar - 06-11-2016 (01-24-2016, 02:49 PM)Atomkinder Wrote: Saw some mention of dimensions in the 'Cases and Enclosure Question' thread, but I'm hoping for a nominal dimension solid model if possible, or at least a good print to work from. I'm a machinist by trade and want to try a few enclosure designs and the one REV B drawing is only for outer board dimensions which isn't going to do it. I want to be able to design and machine aluminum cases with integrated standoffs and the like. try this: https://grabcad.com/library/pine64-a64-db-2gb-rev-b-1 (04-13-2016, 09:29 AM)w1ntermute0 Wrote: If it helps anyone I threw together a rough CAD model, it's located here (see photo in attachment): this is also available thanks https://grabcad.com/library/pine64-a64-db-2gb-rev-b-1 |