[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.102-2-pine64-longsleep (longsleep@mose2) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #66 SMP PREEMPT Sat Jul 16 10:53:13 CEST 2016 [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000] Machine: sun50iw1p1 [ 0.000000] cma: CMA: reserved 64 MiB at 7c000000 [ 0.000000] On node 0 totalpages: 258048 [ 0.000000] DMA zone: 3528 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 258048 pages, LIFO batch:31 [ 0.000000] script_init enter! [ 0.000000] script buffer is NULL! [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc03af98000 s19136 r8192 d21824 u49152 [ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254520 [ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend disp.screen0_output_mode=720p60 earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Memory: 1008MB = 1008MB total [ 0.000000] Memory: 936716k/936716k available, 95476k reserved [ 0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB) vmemmap : 0xffffffbc00e38000 - 0xffffffbc01c00000 ( 13 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB) .init : 0xffffffc0009dd000 - 0xffffffc000a5fac0 ( 523 kB) .text : 0xffffffc000080000 - 0xffffffc0009dcac4 ( 9587 kB) .data : 0xffffffc000a60000 - 0xffffffc000bb7f80 ( 1376 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 7.328674] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 7.328704] pid_max: default: 32768 minimum: 301 [ 7.328807] Security Framework initialized [ 7.328862] AppArmor: AppArmor initialized [ 7.328908] Mount-cache hash table entries: 256 [ 7.339293] Initializing cgroup subsys memory [ 7.339353] Initializing cgroup subsys devices [ 7.339370] Initializing cgroup subsys freezer [ 7.339386] Initializing cgroup subsys blkio [ 7.339402] Initializing cgroup subsys perf_event [ 7.339423] Initializing cgroup subsys hugetlb [ 7.339489] ftrace: allocating 27408 entries in 108 pages [ 7.371551] CPU0: update cpu_power 1968128 [ 7.371585] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available [ 7.372524] virtual base = 0xffffff800000a000. [ 7.372544] gicd_base = 0xffffff800000c000. [ 7.372557] gicc_base = 0xffffff800000e000. [ 7.373121] CPU1: Booted secondary processor [ 7.373144] CPU1: update cpu_power 1968128 [ 7.375748] CPU2: Booted secondary processor [ 7.375759] CPU2: update cpu_power 1968128 [ 7.379866] CPU3: Booted secondary processor [ 7.379877] CPU3: update cpu_power 1968128 [ 7.379957] Brought up 4 CPUs [ 7.380033] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 7.380629] devtmpfs: initialized [ 7.385384] atomic64 test passed [ 7.385404] pinctrl core: initialized pinctrl subsystem [ 7.387913] NET: Registered protocol family 16 [ 7.388178] script_sysfs_init success [ 7.388392] dump_class_init,806, success [ 7.388664] vdso: 2 pages (1 code, 1 data) at base ffffffc000a65000 [ 7.388695] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 7.389957] software IO TLB [mem 0x79c00000-0x7a000000] (4MB) mapped at [ffffffc038c00000-ffffffc038ffffff] [ 7.390933] DMA: preallocated 256 KiB pool for atomic allocations [ 7.391069] Serial: AMBA PL011 UART driver [ 7.391171] axp81x_board_init: axp regl_devs num = 23 [ 7.391318] pll_audio-set_default_rate=24576000 success! [ 7.391348] pll_video0-set_default_rate=297000000 success! [ 7.391426] pll_video1-set_default_rate=297000000 success! [ 7.391497] pll_de-set_default_rate=297000000 success! [ 7.392234] de-set_default_source=pll_de success! [ 7.392249] de-set_default_rate=297000000 success! [ 7.392306] tcon0-set_default_source=pll_mipi success! [ 7.392347] tcon1-set_default_source=pll_video0 success! [ 7.392578] hdmi-set_default_source=pll_video0 success! [ 7.394832] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 7.395010] [sun50iw1p1_pinctrl_probe][838] [ 7.396666] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 7.397303] sunxi hwspinlock vbase:0xffffff800005c000 [ 7.402799] sunxi_chipid_probe,150: soc bin:0 [ 7.407637] bio: create slab at 0 [ 7.408036] pwm module init! [ 7.409232] SCSI subsystem initialized [ 7.409370] usbcore: registered new interface driver usbfs [ 7.409414] usbcore: registered new interface driver hub [ 7.409494] usbcore: registered new device driver usb [ 7.410219] Linux video capture interface: v2.00 [ 7.410717] [ARISC] :sunxi-arisc driver v1.10 [ 7.417785] [ARISC] :sunxi-arisc driver v1.10 startup succeeded [ 7.418020] Advanced Linux Sound Architecture Driver Initialized. [ 7.418371] NetLabel: Initializing [ 7.418385] NetLabel: domain hash size = 128 [ 7.418397] NetLabel: protocols = UNLABELED CIPSOv4 [ 7.418443] NetLabel: unlabeled traffic allowed by default [ 7.418603] [pm]aw_pm_init! [ 7.418665] rtc physical base = 0x0000000001f00000 . [ 7.418707] np name = /soc@01c00000/rtc@01f00000. [ 7.418723] base = ffffff8000070100, len = 4. [ 7.418736] pmu name: pmu0 . [ 7.418772] pmu0_enable = 0x1. [ 7.418785] pmux_id = 0x6. [ 7.418797] pmux_twi_id = 0x1. [ 7.418809] pmux_twi_addr = 0x34. [ 7.418820] pmu name: pmu1 . [ 7.418872] Warning: can not find np for pmu1. [ 7.419096] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed [ 7.419260] after inited: sys_mask config = 0x4a55. [ 7.419291] Warning: can not find np for dynamic_standby_para. [ 7.419425] [pm]valid [ 7.419435] [pm]valid [ 7.419445] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby. [ 7.419665] Switching to clocksource arch_sys_counter [ 7.430391] AppArmor: AppArmor Filesystem Enabled [ 7.436569] NET: Registered protocol family 2 [ 7.437277] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 7.437420] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 7.437585] TCP: Hash tables configured (established 8192 bind 8192) [ 7.437668] TCP: reno registered [ 7.437684] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 7.437724] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 7.437933] NET: Registered protocol family 1 [ 7.438228] RPC: Registered named UNIX socket transport module. [ 7.438245] RPC: Registered udp transport module. [ 7.438259] RPC: Registered tcp transport module. [ 7.438272] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.438440] Trying to unpack rootfs image as initramfs... [ 7.482110] Freeing initrd memory: 1048K (ffffffc035db0000 - ffffffc035eb6000) [ 7.483115] kvm [1]: interrupt-controller@1c84000 IRQ25 [ 7.483534] kvm [1]: timer IRQ27 [ 7.483555] kvm [1]: Hyp mode initialized successfully [ 7.485309] lock super standby defaultly! [ 7.485334] lookup_scene_lock_name: new scene lock super_standby [ 7.485350] scene_lock_init name=super_standby [ 7.485364] scene_lock: super_standby, type 5, count 1 [ 7.485764] audit: initializing netlink socket (disabled) [ 7.485817] type=2000 audit(0.140:1): initialized [ 7.486400] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 7.486896] VFS: Disk quotas dquot_6.5.2 [ 7.487015] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 7.487432] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.487984] NFS: Registering the id_resolver key type [ 7.488034] Key type id_resolver registered [ 7.488048] Key type id_legacy registered [ 7.488068] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.488222] NTFS driver 2.1.30 [Flags: R/W]. [ 7.488391] fuse init (API version 7.22) [ 7.488636] msgmni has been set to 1959 [ 7.489632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 7.489739] io scheduler noop registered [ 7.489754] io scheduler deadline registered [ 7.489788] io scheduler cfq registered (default) [ 7.490301] [DISP]disp_module_init [ 7.490713] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail [ 7.490737] [DISP] boot_disp:0x0 [ 7.491323] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail [ 7.491482] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail [ 7.491638] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail [ 7.492724] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail [ 7.492746] [DISP] fb_base:0x0 [ 7.529889] Console: switching to colour frame buffer device 240x67 [ 7.558357] [DISP]disp_module_init finish [ 7.558814] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 7.558968] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n [ 8.534827] console [ttyS0] enabled [ 8.539208] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 8.546150] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 8.553192] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI [ 8.560181] uart4: ttyS4 at MMIO 0x1c29000 (irq = 36) is a SUNXI [ 8.567238] misc dump reg init [ 8.570809] [drm] Initialized drm 1.1.0 20060810 [ 8.580437] brd: module loaded [ 8.586215] loop: module loaded [ 8.589961] sunxi-bt bt.27: Missing bt_power. [ 8.594832] sunxi-bt bt.27: bt_power_name ((null)) [ 8.600168] sunxi-bt bt.27: io_regulator_name (vcc-wifi-io) [ 8.606414] sunxi-bt bt.27: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0 [ 8.615182] sunxi-bt bt.27: clk not config [ 8.619803] sunxi-bt bt.27: block state already is 1 [ 8.625528] sunxi-wlan wlan.26: wlan_busnum (1) [ 8.630589] sunxi-wlan wlan.26: Missing wlan_power. [ 8.636019] sunxi-wlan wlan.26: wlan_power_name ((null)) [ 8.641946] sunxi-wlan wlan.26: io_regulator_name (vcc-wifi-io) [ 8.648553] sunxi-wlan wlan.26: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0 [ 8.658078] sunxi-wlan wlan.26: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0 [ 8.667889] sunxi-wlan wlan.26: clk not config [ 8.673422] tun: Universal TUN/TAP device driver, 1.6 [ 8.679046] tun: (C) 1999-2004 Max Krasnyansky [ 8.686542] WARNING: Get ephy clock is failed [ 8.691719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.699110] get ehci0-controller drv_vbus_gpio is fail [ 8.704834] get ehci0-controller, regulator_io is no nocare [ 8.711088] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00, 0x:ffffff80000aa000, irq_no:68 [ 8.724613] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.734721] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1 [ 8.744626] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004f154c [ 8.767810] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00 [ 8.775568] ehci_irq: highspeed device connect [ 8.786808] hub 1-0:1.0: USB hub found [ 8.797199] hub 1-0:1.0: 1 port detected [ 8.807827] scene_lock_init name=ehci_standby [ 8.818861] get ehci1-controller drv_vbus_gpio is fail [ 8.830697] get ehci1-controller, regulator_io is no nocare [ 8.843051] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000c62d50, 0x:ffffff80000b2000, irq_no:6a [ 8.862778] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.879174] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2 [ 8.895346] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0004f154c [ 8.925250] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00 [ 8.939411] ehci_irq: highspeed device connect [ 8.950871] hub 2-0:1.0: USB hub found [ 8.961463] hub 2-0:1.0: 1 port detected [ 8.972247] scene_lock_init name=ehci_standby [ 8.983595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.996934] get ohci0-controller drv_vbus_gpio is fail [ 9.008959] get ohci0-controller, regulator_io is no nocare [ 9.021389] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660 [ 9.037999] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 9.053929] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3 [ 9.069749] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x652c6a626e6b61ff [ 9.122052] usb 1-1: new high-speed USB device number 2 using sunxi-ehci [ 9.146002] hub 3-0:1.0: USB hub found [ 9.156355] hub 3-0:1.0: 1 port detected [ 9.166944] scene_lock_init name=ohci_standby [ 9.177924] get ohci1-controller drv_vbus_gpio is fail [ 9.189688] get ohci1-controller, regulator_io is no nocare [ 9.201881] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000c628b0 [ 9.218268] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 9.234044] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 4 [ 9.249792] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x652c6a626e6b61ff [ 9.290286] hub 1-1:1.0: USB hub found [ 9.300912] hub 1-1:1.0: 4 ports detected [ 9.323114] hub 4-0:1.0: USB hub found [ 9.333524] hub 4-0:1.0: 1 port detected [ 9.344191] scene_lock_init name=ohci_standby [ 9.355559] usbcore: registered new interface driver usb-storage [ 9.368051] ehci_irq: highspeed device disconnect [ 9.368060] ohci_irq: fullspeed or lowspeed device connect [ 9.392421] usbcore: registered new interface driver ums-alauda [ 9.405327] usbcore: registered new interface driver ums-cypress [ 9.418250] usbcore: registered new interface driver ums-datafab [ 9.431146] usbcore: registered new interface driver ums_eneub6250 [ 9.444216] usbcore: registered new interface driver ums-freecom [ 9.457054] usbcore: registered new interface driver ums-isd200 [ 9.469775] usbcore: registered new interface driver ums-jumpshot [ 9.482641] usbcore: registered new interface driver ums-karma [ 9.495135] usbcore: registered new interface driver ums-onetouch [ 9.507831] usbcore: registered new interface driver ums-realtek [ 9.520335] usbcore: registered new interface driver ums-sddr09 [ 9.532689] usbcore: registered new interface driver ums-sddr55 [ 9.544982] usbcore: registered new interface driver ums-usbat [ 9.557129] usbcore: registered new interface driver usbserial [ 9.569133] usbcore: registered new interface driver usbserial_generic [ 9.581813] usbserial: USB Serial support registered for generic [ 9.594189] mousedev: PS/2 mouse device common for all mice [ 9.606165] input: sunxi-keyboard as /devices/virtual/input/input0 [ 9.618781] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0 [ 9.631589] sunxi-rtc 1f00000.rtc: RTC enabled [ 9.641959] i2c /dev entries driver [ 9.693251] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1 [ 9.712184] sunxi budget cooling probe start ! [ 9.722576] CPU freq cooling register Success [ 9.733952] CPU hotplug cooling register Success [ 9.744599] CPU budget cooling register Success [ 9.755294] sunxi gpu cooling probe start ! [ 9.765401] CPU gpu cooling register Success [ 9.778240] cpuidle: using governor ladder [ 9.787261] cpuidle: using governor menu [ 9.796727] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 15 2016 at 23:55:24 [ 9.814301] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none [ 9.825667] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none [ 9.830679] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci [ 9.849239] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc [ 9.861086] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found [ 9.872007] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found [ 9.883429] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166. [ 9.893773] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 9.909501] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator [ 9.938766] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 9.955346] hub 1-1.1:1.0: USB hub found [ 9.964498] hub 1-1.1:1.0: 4 ports detected [ 9.968318] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000c6000 irq:92 [ 9.968692] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 15 2016 at 23:55:24 [ 9.968712] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string [ 9.968716] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string [ 9.968721] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string [ 9.968723] get() with no identifier [ 9.968724] get() with no identifier [ 9.968725] get() with no identifier [ 9.968728] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found [ 9.968731] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found [ 9.968734] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found [ 10.095673] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !! [ 10.107108] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.107503] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !! [ 10.107522] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.109920] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.112044] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !! [ 10.112853] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !! [ 10.113662] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !! [ 10.114472] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !! [ 10.115101] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B [ 10.115141] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B [ 10.117510] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B [ 10.142552] mmc0: host does not support reading read-only switch. assuming write-enable. [ 10.144362] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B [ 10.144401] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B [ 10.144498] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B [ 10.144516] mmc0: new high speed SDHC card at address 0007 [ 10.184915] usb 1-1.4: new high-speed USB device number 4 using sunxi-ehci [ 10.343383] mmcblk0: mmc0:0007 SD32G 28.9 GiB [ 10.343520] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator [ 10.361895] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.381592] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000ce000 irq:93 [ 10.382203] usbcore: registered new interface driver usbhid [ 10.382205] usbhid: USB HID core driver [ 10.415937] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 10.416939] mmcblk0: p1 p2 [ 10.418106] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 10.418912] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 10.418928] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.421317] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.423131] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !! [ 10.423938] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 10.424742] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 10.425544] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 10.426346] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 10.427153] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 10.427958] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 10.428762] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 10.429567] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 10.429580] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 10.430412] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !! [ 10.430426] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 10.641123] scsi0 : usb-storage 1-1.4:1.0 [ 10.641496] usbcore: registered new interface driver snd-usb-audio [ 10.662275] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok [ 10.674828] TCP: cubic registered [ 10.683339] NET: Registered protocol family 10 [ 10.693615] sit: IPv6 over IPv4 tunneling driver [ 10.703736] NET: Registered protocol family 17 [ 10.713270] 8021q: 802.1Q VLAN Support v1.8 [ 10.722534] Key type dns_resolver registered [ 10.732013] Registering SWP/SWPB emulation handler [ 10.742061] registered taskstats version 1 [ 10.751847] Key type encrypted registered [ 10.760737] AppArmor: AppArmor sha1 policy hashing enabled [ 10.771641] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail [ 10.784856] [DISP] boot_disp:0x0 [ 10.793748] [HDMI] power vcc-hdmi-33 [ 10.802848] [HDMI] cec support = 0 [ 10.834238] usb 4-1: new full-speed USB device number 2 using sunxi-ohci [ 10.913951] sunxi-rtc 1f00000.rtc: setting system clock to 2016-08-01 12:52:52 UTC (1470055972) [ 10.929038] input: sunxi-ths as /devices/virtual/input/input2 [ 10.940456] thermal thermal_zone0: failed to read out thermal zone 0 [ 10.952773] ALSA device list: [ 10.960898] #0: sndhdmi [ 10.968985] Freeing unused kernel memory: 520K (ffffffc0009dd000 - ffffffc000a5f000) [ 11.041977] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 11.056634] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 11.071046] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.0/input/input3 [ 11.087269] hid-generic 0003:256C:006E.0001: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input0 [ 11.107907] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.1/input/input4 [ 11.124266] hid-generic 0003:256C:006E.0002: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input1 [ 11.175671] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 11.218139] usb 1-1.1.1: new low-speed USB device number 5 using sunxi-ehci [ 11.345241] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input5 [ 11.364403] hid-generic 0003:1C4F:0002.0003: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input0 [ 11.385261] [ehci0-controller]: sunxi_usb_disable_ehci [ 11.386398] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input6 [ 11.386558] hid-generic 0003:1C4F:0002.0004: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input1 [ 11.434893] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00 [ 11.451450] scene_lock_destroy name=ehci_standby [ 11.462758] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1 [ 11.475573] usb usb1: USB disconnect, device number 1 [ 11.487281] usb 1-1: USB disconnect, device number 2 [ 11.498868] usb 1-1.1: USB disconnect, device number 3 [ 11.503344] usb 1-1.1.2: new low-speed USB device number 6 using sunxi-ehci [ 11.503447] usb 1-1.1.1: USB disconnect, device number 5 [ 11.513194] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10 [ 11.558503] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 11.579946] systemd[1]: Detected architecture 'arm64'. [ 11.632501] systemd[1]: Set hostname to . [ 11.977327] systemd[1]: Expecting device dev-ttyS0.device... [ 11.986077] usb 1-1.4: USB disconnect, device number 4 [ 12.006320] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered [ 12.009267] ohci_irq: fullspeed or lowspeed device connect [ 12.026880] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 12.027066] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.027127] systemd[1]: Starting Remote File Systems (Pre). [ 12.077155] [ohci0-controller]: sunxi_usb_disable_ohci [ 12.089861] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660 [ 12.103620] systemd[1]: Reached target Remote File Systems (Pre). [ 12.103711] systemd[1]: Starting Encrypted Volumes. [ 12.133858] scene_lock_destroy name=ohci_standby [ 12.146062] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1 [ 12.162652] systemd[1]: Reached target Encrypted Volumes. [ 12.175734] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 12.191839] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.207704] systemd[1]: Starting Paths. [ 12.221652] hub 3-0:1.0: activate --> -108 [ 12.231536] systemd[1]: Reached target Paths. [ 12.231634] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.231672] systemd[1]: Expecting device dev-sda1.device... [ 12.234273] hub 3-0:1.0: hub_port_status failed (err = -108) [ 12.234280] usb usb3: USB disconnect, device number 1 [ 12.246347] sunxi-ohci 1c1a000.ohci0-controller: USB bus 3 deregistered [ 12.246385] [ehci0-controller]: sunxi_usb_enable_ehci [ 12.246391] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00, 0x:ffffff80000aa000, irq_no:68 [ 12.246429] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.246447] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1 [ 12.320072] hdmi_clk_enable_prepare()L161 [ 12.330986] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0388a8090 [ 12.349566] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00 [ 12.349572] ehci_irq: highspeed device connect [ 12.349997] hub 1-0:1.0: USB hub found [ 12.350008] hub 1-0:1.0: 1 port detected [ 12.350151] scene_lock_init name=ehci_standby [ 12.350155] [ohci0-controller]: sunxi_usb_enable_ohci [ 12.350160] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660 [ 12.350200] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 12.350212] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3 [ 12.350236] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc0388a8090 [ 12.412831] hub 3-0:1.0: USB hub found [ 12.412842] hub 3-0:1.0: 1 port detected [ 12.412967] scene_lock_init name=ohci_standby [ 12.615365] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 12.644826] systemd[1]: Starting Root Slice. [ 12.674297] usb 1-1: new high-speed USB device number 2 using sunxi-ehci [ 12.674327] systemd[1]: Created slice Root Slice. [ 12.674372] systemd[1]: Starting User and Session Slice. [ 12.733373] systemd[1]: Created slice User and Session Slice. [ 12.746187] systemd[1]: Starting Delayed Shutdown Socket. [ 12.772728] systemd[1]: Listening on Delayed Shutdown Socket. [ 12.785346] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 12.821925] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 12.835886] systemd[1]: Starting Journal Socket (/dev/log). [ 12.871139] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.884009] systemd[1]: Starting udev Control Socket. [ 12.896527] hub 1-1:1.0: USB hub found [ 12.907879] hub 1-1:1.0: 4 ports detected [ 12.940040] systemd[1]: Listening on udev Control Socket. [ 12.952053] systemd[1]: Starting udev Kernel Socket. [ 12.979376] systemd[1]: Listening on udev Kernel Socket. [ 12.991155] systemd[1]: Starting Journal Socket. [ 13.018766] systemd[1]: Listening on Journal Socket. [ 13.030284] systemd[1]: Starting System Slice. [ 13.058090] systemd[1]: Created slice System Slice. [ 13.069262] systemd[1]: Started File System Check on Root Device. [ 13.081663] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 13.117137] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 13.129719] systemd[1]: Starting system-getty.slice. [ 13.156508] systemd[1]: Created slice system-getty.slice. [ 13.168049] systemd[1]: Starting system-serial\x2dgetty.slice. [ 13.195849] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 13.208314] systemd[1]: Starting Increase datagram queue length... [ 13.225475] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci [ 13.240214] systemd[1]: Starting Restore / save the current clock... [ 13.282679] systemd[1]: Starting Initialize Sunxi disp2 HDMI output mode... [ 13.315604] systemd[1]: Mounting Huge Pages File System... [ 13.364180] hub 1-1.1:1.0: USB hub found [ 13.375550] hub 1-1.1:1.0: 4 ports detected [ 13.386061] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 13.455560] systemd[1]: Started Set Up Additional Binary Formats. [ 13.468050] usb 1-1.4: new high-speed USB device number 4 using sunxi-ehci [ 13.525857] systemd[1]: Starting Load Kernel Modules... [ 13.562935] systemd[1]: Mounting POSIX Message Queue File System... [ 13.577176] hdmi_clk_disable_prepare()L176 [ 13.600999] systemd[1]: Starting udev Coldplug all Devices... [ 13.630884] systemd[1]: Mounting Debug File System... [ 13.643154] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 13.659432] scsi1 : usb-storage 1-1.4:1.0 [ 13.660162] systemd[1]: Starting Slices. [ 13.697871] systemd[1]: Reached target Slices. [ 13.717399] hdmi_clk_enable_prepare()L161 [ 13.727402] systemd[1]: Mounted Debug File System. [ 13.825711] systemd[1]: Mounted POSIX Message Queue File System. [ 13.855237] systemd[1]: Mounted Huge Pages File System. [ 13.884738] systemd[1]: Started Increase datagram queue length. [ 13.914294] usb 1-1.1.1: new low-speed USB device number 5 using sunxi-ehci [ 13.925600] systemd[1]: Started Restore / save the current clock. [ 13.953613] systemd[1]: Started Initialize Sunxi disp2 HDMI output mode. [ 13.983145] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 14.041426] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7 [ 14.058909] hid-generic 0003:1C4F:0002.0005: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input0 [ 14.059383] systemd[1]: Starting Create Static Device Nodes in /dev... [ 14.090464] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input8 [ 14.109791] hid-generic 0003:1C4F:0002.0006: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input1 [ 14.124445] systemd[1]: Starting Syslog Socket. [ 14.150583] cfg80211: Calling CRDA to update world regulatory domain [ 14.150637] systemd[1]: Listening on Syslog Socket. [ 14.150755] systemd[1]: Starting Journal Service... [ 14.209493] usb 1-1.1.2: new low-speed USB device number 6 using sunxi-ehci [ 14.222005] systemd[1]: Started Journal Service. [ 14.344346] input: 2.4G RF MOUSE as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input9 [ 14.361916] hid-generic 0003:2635:0601.0007: input: USB HID v1.11 Mouse [ 2.4G RF MOUSE] on usb-sunxi-ehci-1.1.2/input0 [ 14.389514] systemd-udevd[186]: starting version 215 [ 14.405754] RTL871X: module init start [ 14.414808] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844 [ 14.427316] RTL871X: build time: Jul 16 2016 11:00:09 [ 14.437822] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844 [ 14.450582] sunxi-wlan wlan.26: bus_index: 1 [ 14.460432] sunxi-wlan wlan.26: check wlan io_regulator voltage: 1800000 [ 14.568770] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 14.585021] RTL871X: module init ret=0 [ 14.588807] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator [ 14.603023] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 14.623414] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 14.636036] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 14.648616] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 14.668799] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 [ 14.670445] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 14.672274] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !! [ 14.673146] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 14.673963] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 14.674783] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 14.675599] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 14.676503] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 14.677333] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 14.678158] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 14.678988] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !! [ 14.679126] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 14.680244] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !! [ 14.680383] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 14.848371] sd 1:0:0:0: [sda] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB) [ 14.864870] sd 1:0:0:0: [sda] Write Protect is off [ 14.875074] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 14.875802] sd 1:0:0:0: [sda] No Caching mode page found [ 14.886669] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 14.901145] sd 1:0:0:0: [sda] No Caching mode page found [ 14.912271] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 15.140961] sda: sda1 sda2 [ 15.151054] sd 1:0:0:0: [sda] No Caching mode page found [ 15.161111] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 15.172058] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 18.838974] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 19.181899] sunxi-bt bt.27: set block: 0 [ 19.190554] sunxi-bt bt.27: check bluetooth io_regulator voltage: 1800000 [ 19.388153] sunxi cedar version 0.1 [ 19.396308] [cedar]: install start!!! [ 19.404959] ycy the get irq is 90 [ 19.413000] ycy clk_bass_vir 0x18 is ffffff8002696018, the value:3006207 [ 19.424369] ycy clk_bass_vir 0x13c is ffffff800269613c, the value:0 [ 19.435247] ycy clk_bass_vir 0x64 is ffffff8002696064, the value:601810 [ 19.446411] ycy clk_bass_vir 0x2c4 is ffffff80026962c4, the value:601c10 [ 19.457619] ycy clk_bass_vir 0x100 is ffffff8002696100, the value:0 [ 19.468254] [cedar]: install end!!! [ 19.803473] [VFE]cci probe end cci_sel = 0! [ 19.811972] [VFE]cci_init end [ 19.863753] Registered IR keymap rc_map_sunxi [ 19.872507] input: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0/input10 [ 19.884181] rc0: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0 [ 19.910424] IR NEC protocol handler initialized [ 19.920050] IR RC5(x) protocol handler initialized [ 19.930976] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input11 [ 19.945707] IR MCE Keyboard/mouse protocol handler initialized [ 19.945716] IR JVC protocol handler initialized [ 19.971997] Mali: Set gpu frequency to 408 MHz [ 19.980531] Mali: Init Mali gpu clocks successfully [ 19.989551] gpu cooling callback register Success [ 19.999787] Mali: Mali device driver loaded [ 20.021488] IR SANYO protocol handler initialized [ 20.021491] IR RC6 protocol handler initialized [ 20.048102] lirc_dev: IR Remote Control driver registered, major 249 [ 20.072704] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 [ 20.086847] IR LIRC bridge handler initialized [ 20.087344] IR Sony protocol handler initialized [ 20.802140] gpu cooling callback set freq limit 0 [ 21.691934] cfg80211: World regulatory domain updated: [ 21.702181] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.715610] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.727639] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.739550] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 21.751643] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 21.763456] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 21.775283] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 21.788791] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 21.801291] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 21.805846] Adding 1853436k swap on /dev/sda1. Priority:-1 extents:1 across:1853436k [ 21.818549] [VFE]Welcome to Video Front End driver [ 21.818804] [VFE]csi probe end csi_sel = 0! [ 21.819123] [VFE]csi_init end [ 21.820345] [VFE]isp probe start isp_sel = 0! [ 21.858548] uclogic 0003:256C:006E.0001: : USB HID v1.11 Keypad [HUION PenTablet] on usb-sunxi-ohci-1/input0 [ 21.874085] [ISP] isp platform_id = 3! [ 21.882380] [VFE]isp probe end isp_sel = 0! [ 21.890904] [VFE]sunxi_isp_platform_register end [ 21.901295] [VFE]mipi probe start mipi_sel = 0! [ 21.911348] [VFE]mipi probe end mipi_sel = 0! [ 21.918415] uclogic 0003:256C:006E.0002: : USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input1 [ 21.934558] [VFE]mipi_init end [ 21.941724] [VFE]flash_init end [ 21.949886] [VFE]pdev->id = 0 [ 21.956967] [VFE]dev->vip_sel = 0 [ 21.964694] [VFE]vfe_init end [ 21.973122] [VFE]probe_work_handle start! [ 21.981254] [VFE]vfe_runtime_resume [ 22.000473] [VFE]..........................vfe clk open!....................... [ 22.012210] [VFE_WARN]vfe dphy clock is null [ 22.020545] [VFE]V4L2 device registered as (null) [ 22.029212] [VFE]vfe_runtime_suspend [ 22.036566] [VFE]..........................vfe clk close!....................... [ 22.054318] [VFE]probe_work_handle end! [ 22.298093] systemd-journald[185]: Received request to flush runtime journal from PID 1 [ 30.230791] libphy: 1c30000.eth: probed [ 30.235372] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00) [ 32.609673] [DISP] disp_ioctl,line:1558:para err in disp_ioctl, cmd = 0x0,screen id = 65536 [ 35.148774] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full [ 35.681137] Bluetooth: Core ver 2.16 [ 35.685760] NET: Registered protocol family 31 [ 35.690931] Bluetooth: HCI device and connection manager initialized [ 35.698008] Bluetooth: HCI socket layer initialized [ 35.703466] Bluetooth: L2CAP socket layer initialized [ 35.709212] Bluetooth: SCO socket layer initialized [ 35.811227] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.817234] Bluetooth: BNEP filters: protocol multicast [ 35.823347] Bluetooth: BNEP socket layer initialized [ 72.629806] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 76.152168] sunxi-bt bt.27: block state already is 0 [ 197.509134] ohci_irq: fullspeed or lowspeed device disconnect [ 197.515621] usb 4-1: USB disconnect, device number 2 [ 205.448284] ehci_irq: highspeed device connect [ 205.573653] ohci_irq: fullspeed or lowspeed device connect [ 205.967346] usb 4-1: new full-speed USB device number 3 using sunxi-ohci [ 206.192888] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.0/input/input12 [ 206.204846] hid-generic 0003:256C:006E.0008: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input0 [ 206.222567] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.1/input/input13 [ 206.234374] hid-generic 0003:256C:006E.0009: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input1 [ 206.560487] uclogic 0003:256C:006E.0008: : USB HID v1.11 Keypad [HUION PenTablet] on usb-sunxi-ohci-1/input0 [ 206.743397] uclogic 0003:256C:006E.0009: : USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input1