[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.102-2-pine64-longsleep (longsleep@mose2) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #66 SMP PREEMPT Sat Jul 16 10:53:13 CEST 2016
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] Machine: sun50iw1p1
[ 0.000000] cma: CMA: reserved 64 MiB at 7c000000
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] DMA zone: 3528 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 258048 pages, LIFO batch:31
[ 0.000000] script_init enter!
[ 0.000000] script buffer is NULL!
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc03af98000 s19136 r8192 d21824 u49152
[ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254520
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend disp.screen0_output_mode=720p60 earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 1008MB = 1008MB total
[ 0.000000] Memory: 936716k/936716k available, 95476k reserved
[ 0.000000] Virtual kernel memory layout:
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
vmemmap : 0xffffffbc00e38000 - 0xffffffbc01c00000 ( 13 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB)
.init : 0xffffffc0009dd000 - 0xffffffc000a5fac0 ( 523 kB)
.text : 0xffffffc000080000 - 0xffffffc0009dcac4 ( 9587 kB)
.data : 0xffffffc000a60000 - 0xffffffc000bb7f80 ( 1376 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 7.341772] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 7.341802] pid_max: default: 32768 minimum: 301
[ 7.341904] Security Framework initialized
[ 7.341959] AppArmor: AppArmor initialized
[ 7.342006] Mount-cache hash table entries: 256
[ 7.352403] Initializing cgroup subsys memory
[ 7.352463] Initializing cgroup subsys devices
[ 7.352480] Initializing cgroup subsys freezer
[ 7.352496] Initializing cgroup subsys blkio
[ 7.352511] Initializing cgroup subsys perf_event
[ 7.352531] Initializing cgroup subsys hugetlb
[ 7.352600] ftrace: allocating 27408 entries in 108 pages
[ 7.384665] CPU0: update cpu_power 1968128
[ 7.384698] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 7.385631] virtual base = 0xffffff800000a000.
[ 7.385652] gicd_base = 0xffffff800000c000.
[ 7.385664] gicc_base = 0xffffff800000e000.
[ 7.386230] CPU1: Booted secondary processor
[ 7.386253] CPU1: update cpu_power 1968128
[ 7.388856] CPU2: Booted secondary processor
[ 7.388867] CPU2: update cpu_power 1968128
[ 7.392973] CPU3: Booted secondary processor
[ 7.392984] CPU3: update cpu_power 1968128
[ 7.393064] Brought up 4 CPUs
[ 7.393140] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 7.393735] devtmpfs: initialized
[ 7.398448] atomic64 test passed
[ 7.398467] pinctrl core: initialized pinctrl subsystem
[ 7.400954] NET: Registered protocol family 16
[ 7.401227] script_sysfs_init success
[ 7.401441] dump_class_init,806, success
[ 7.401725] vdso: 2 pages (1 code, 1 data) at base ffffffc000a65000
[ 7.401757] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 7.403015] software IO TLB [mem 0x79c00000-0x7a000000] (4MB) mapped at [ffffffc038c00000-ffffffc038ffffff]
[ 7.404053] DMA: preallocated 256 KiB pool for atomic allocations
[ 7.404192] Serial: AMBA PL011 UART driver
[ 7.404300] axp81x_board_init: axp regl_devs num = 23
[ 7.404441] pll_audio-set_default_rate=24576000 success!
[ 7.404471] pll_video0-set_default_rate=297000000 success!
[ 7.404554] pll_video1-set_default_rate=297000000 success!
[ 7.404622] pll_de-set_default_rate=297000000 success!
[ 7.405355] de-set_default_source=pll_de success!
[ 7.405371] de-set_default_rate=297000000 success!
[ 7.405423] tcon0-set_default_source=pll_mipi success!
[ 7.405468] tcon1-set_default_source=pll_video0 success!
[ 7.405700] hdmi-set_default_source=pll_video0 success!
[ 7.407930] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 7.408107] [sun50iw1p1_pinctrl_probe][838]
[ 7.409766] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 7.410407] sunxi hwspinlock vbase:0xffffff800005c000
[ 7.415955] sunxi_chipid_probe,150: soc bin:0
[ 7.420779] bio: create slab <bio-0> at 0
[ 7.421132] pwm module init!
[ 7.422334] SCSI subsystem initialized
[ 7.422471] usbcore: registered new interface driver usbfs
[ 7.422517] usbcore: registered new interface driver hub
[ 7.422591] usbcore: registered new device driver usb
[ 7.423319] Linux video capture interface: v2.00
[ 7.423800] [ARISC] :sunxi-arisc driver v1.10
[ 7.430836] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
[ 7.431077] Advanced Linux Sound Architecture Driver Initialized.
[ 7.431434] NetLabel: Initializing
[ 7.431448] NetLabel: domain hash size = 128
[ 7.431460] NetLabel: protocols = UNLABELED CIPSOv4
[ 7.431506] NetLabel: unlabeled traffic allowed by default
[ 7.431669] [pm]aw_pm_init!
[ 7.431731] rtc physical base = 0x0000000001f00000 .
[ 7.431773] np name = /soc@01c00000/rtc@01f00000.
[ 7.431789] base = ffffff8000070100, len = 4.
[ 7.431802] pmu name: pmu0 .
[ 7.431841] pmu0_enable = 0x1.
[ 7.431853] pmux_id = 0x6.
[ 7.431865] pmux_twi_id = 0x1.
[ 7.431877] pmux_twi_addr = 0x34.
[ 7.431888] pmu name: pmu1 .
[ 7.431940] Warning: can not find np for pmu1.
[ 7.432166] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
[ 7.432330] after inited: sys_mask config = 0x4a55.
[ 7.432362] Warning: can not find np for dynamic_standby_para.
[ 7.432490] [pm]valid
[ 7.432499] [pm]valid
[ 7.432509] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby.
[ 7.432736] Switching to clocksource arch_sys_counter
[ 7.443457] AppArmor: AppArmor Filesystem Enabled
[ 7.450163] NET: Registered protocol family 2
[ 7.450895] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 7.451039] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 7.451203] TCP: Hash tables configured (established 8192 bind 8192)
[ 7.451286] TCP: reno registered
[ 7.451303] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 7.451343] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 7.451554] NET: Registered protocol family 1
[ 7.451835] RPC: Registered named UNIX socket transport module.
[ 7.451853] RPC: Registered udp transport module.
[ 7.451866] RPC: Registered tcp transport module.
[ 7.451879] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.452045] Trying to unpack rootfs image as initramfs...
[ 7.495704] Freeing initrd memory: 1048K (ffffffc035db0000 - ffffffc035eb6000)
[ 7.496695] kvm [1]: interrupt-controller@1c84000 IRQ25
[ 7.497110] kvm [1]: timer IRQ27
[ 7.497133] kvm [1]: Hyp mode initialized successfully
[ 7.498920] lock super standby defaultly!
[ 7.498944] lookup_scene_lock_name: new scene lock super_standby
[ 7.498960] scene_lock_init name=super_standby
[ 7.498975] scene_lock: super_standby, type 5, count 1
[ 7.499364] audit: initializing netlink socket (disabled)
[ 7.499425] type=2000 audit(0.140:1): initialized
[ 7.500009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 7.500485] VFS: Disk quotas dquot_6.5.2
[ 7.500604] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 7.501016] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.501553] NFS: Registering the id_resolver key type
[ 7.501604] Key type id_resolver registered
[ 7.501618] Key type id_legacy registered
[ 7.501637] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.501825] NTFS driver 2.1.30 [Flags: R/W].
[ 7.501996] fuse init (API version 7.22)
[ 7.502196] msgmni has been set to 1959
[ 7.503150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 7.503252] io scheduler noop registered
[ 7.503267] io scheduler deadline registered
[ 7.503300] io scheduler cfq registered (default)
[ 7.503818] [DISP]disp_module_init
[ 7.504229] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 7.504254] [DISP] boot_disp:0x0
[ 7.504828] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.504987] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.505143] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
[ 7.506236] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail
[ 7.506259] [DISP] fb_base:0x0
[ 7.543402] Console: switching to colour frame buffer device 240x67
[ 7.571864] [DISP]disp_module_init finish
[ 7.572331] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 7.572484] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
[ 8.547828] console [ttyS0] enabled
[ 8.552165] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 8.559098] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[ 8.566125] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
[ 8.573101] uart4: ttyS4 at MMIO 0x1c29000 (irq = 36) is a SUNXI
[ 8.580147] misc dump reg init
[ 8.583678] [drm] Initialized drm 1.1.0 20060810
[ 8.593163] brd: module loaded
[ 8.598859] loop: module loaded
[ 8.602599] sunxi-bt bt.27: Missing bt_power.
[ 8.607464] sunxi-bt bt.27: bt_power_name ((null))
[ 8.612799] sunxi-bt bt.27: io_regulator_name (vcc-wifi-io)
[ 8.619037] sunxi-bt bt.27: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 8.627799] sunxi-bt bt.27: clk not config
[ 8.632420] sunxi-bt bt.27: block state already is 1
[ 8.638158] sunxi-wlan wlan.26: wlan_busnum (1)
[ 8.643213] sunxi-wlan wlan.26: Missing wlan_power.
[ 8.648641] sunxi-wlan wlan.26: wlan_power_name ((null))
[ 8.654562] sunxi-wlan wlan.26: io_regulator_name (vcc-wifi-io)
[ 8.661164] sunxi-wlan wlan.26: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 8.670680] sunxi-wlan wlan.26: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
[ 8.680484] sunxi-wlan wlan.26: clk not config
[ 8.686022] tun: Universal TUN/TAP device driver, 1.6
[ 8.691643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.699161] WARNING: Get ephy clock is failed
[ 8.704339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.711708] get ehci0-controller drv_vbus_gpio is fail
[ 8.717446] get ehci0-controller, regulator_io is no nocare
[ 8.723703] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00, 0x:ffffff80000aa000, irq_no:68
[ 8.737221] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.747318] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
[ 8.757206] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004f154c
[ 8.780880] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 8.788634] ehci_irq: highspeed device connect
[ 8.799876] hub 1-0:1.0: USB hub found
[ 8.810269] hub 1-0:1.0: 1 port detected
[ 8.820898] scene_lock_init name=ehci_standby
[ 8.831930] get ehci1-controller drv_vbus_gpio is fail
[ 8.843769] get ehci1-controller, regulator_io is no nocare
[ 8.856120] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000c62d50, 0x:ffffff80000b2000, irq_no:6a
[ 8.875837] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.892259] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2
[ 8.908424] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0004f154c
[ 8.938320] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
[ 8.952483] ehci_irq: highspeed device connect
[ 8.963953] hub 2-0:1.0: USB hub found
[ 8.974545] hub 2-0:1.0: 1 port detected
[ 8.985334] scene_lock_init name=ehci_standby
[ 8.996675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.010015] get ohci0-controller drv_vbus_gpio is fail
[ 9.022067] get ohci0-controller, regulator_io is no nocare
[ 9.034492] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660
[ 9.051103] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 9.067035] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
[ 9.082902] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x652c6a626e6b61ff
[ 9.135124] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 9.159056] hub 3-0:1.0: USB hub found
[ 9.169417] hub 3-0:1.0: 1 port detected
[ 9.180025] scene_lock_init name=ohci_standby
[ 9.191018] get ohci1-controller drv_vbus_gpio is fail
[ 9.202795] get ohci1-controller, regulator_io is no nocare
[ 9.215006] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000c628b0
[ 9.231411] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 9.247183] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 4
[ 9.262943] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x652c6a626e6b61ff
[ 9.303470] hub 1-1:1.0: USB hub found
[ 9.314097] hub 1-1:1.0: 4 ports detected
[ 9.336167] hub 4-0:1.0: USB hub found
[ 9.346593] hub 4-0:1.0: 1 port detected
[ 9.357281] scene_lock_init name=ohci_standby
[ 9.368663] usbcore: registered new interface driver usb-storage
[ 9.381127] ehci_irq: highspeed device disconnect
[ 9.381138] ohci_irq: fullspeed or lowspeed device connect
[ 9.405579] usbcore: registered new interface driver ums-alauda
[ 9.418503] usbcore: registered new interface driver ums-cypress
[ 9.431445] usbcore: registered new interface driver ums-datafab
[ 9.444356] usbcore: registered new interface driver ums_eneub6250
[ 9.457440] usbcore: registered new interface driver ums-freecom
[ 9.470293] usbcore: registered new interface driver ums-isd200
[ 9.483020] usbcore: registered new interface driver ums-jumpshot
[ 9.495915] usbcore: registered new interface driver ums-karma
[ 9.508418] usbcore: registered new interface driver ums-onetouch
[ 9.521124] usbcore: registered new interface driver ums-realtek
[ 9.533647] usbcore: registered new interface driver ums-sddr09
[ 9.546016] usbcore: registered new interface driver ums-sddr55
[ 9.558314] usbcore: registered new interface driver ums-usbat
[ 9.570482] usbcore: registered new interface driver usbserial
[ 9.582498] usbcore: registered new interface driver usbserial_generic
[ 9.595197] usbserial: USB Serial support registered for generic
[ 9.607604] mousedev: PS/2 mouse device common for all mice
[ 9.619614] input: sunxi-keyboard as /devices/virtual/input/input0
[ 9.632225] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
[ 9.645052] sunxi-rtc 1f00000.rtc: RTC enabled
[ 9.655444] i2c /dev entries driver
[ 9.706383] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1
[ 9.725307] sunxi budget cooling probe start !
[ 9.735716] CPU freq cooling register Success
[ 9.745996] CPU hotplug cooling register Success
[ 9.756629] CPU budget cooling register Success
[ 9.767325] sunxi gpu cooling probe start !
[ 9.777402] CPU gpu cooling register Success
[ 9.790191] cpuidle: using governor ladder
[ 9.799231] cpuidle: using governor menu
[ 9.808706] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 15 2016 at 23:55:24
[ 9.826292] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none
[ 9.833907] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
[ 9.849894] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none
[ 9.861410] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
[ 9.873265] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
[ 9.884212] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
[ 9.895597] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
[ 9.905937] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 9.921677] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator
[ 9.951836] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 9.968410] hub 1-1.1:1.0: USB hub found
[ 9.977560] hub 1-1.1:1.0: 4 ports detected
[ 9.981388] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000c6000 irq:92
[ 9.981750] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 15 2016 at 23:55:24
[ 9.981768] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
[ 9.981772] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
[ 9.981777] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
[ 9.981779] get() with no identifier
[ 9.981780] get() with no identifier
[ 9.981781] get() with no identifier
[ 9.981785] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
[ 9.981788] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
[ 9.981791] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
[ 10.108694] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
[ 10.120122] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.120522] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
[ 10.120542] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.122936] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.125061] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[ 10.125870] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[ 10.126679] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[ 10.127488] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[ 10.128115] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[ 10.128155] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[ 10.130524] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
[ 10.155623] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 10.157433] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
[ 10.157472] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
[ 10.157570] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
[ 10.157588] mmc0: new high speed SDHC card at address 0007
[ 10.197977] usb 1-1.4: new high-speed USB device number 4 using sunxi-ehci
[ 10.356202] mmcblk0: mmc0:0007 SD32G 28.9 GiB
[ 10.356312] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
[ 10.374963] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.394662] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000ce000 irq:93
[ 10.395262] usbcore: registered new interface driver usbhid
[ 10.395263] usbhid: USB HID core driver
[ 10.428662] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 10.429652] mmcblk0: p1 p2
[ 10.430819] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 10.431625] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 10.431641] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.434033] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.435847] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
[ 10.436654] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 10.437458] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 10.438263] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 10.439064] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 10.439872] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 10.440676] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 10.441480] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 10.442285] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 10.442299] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 10.443130] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
[ 10.443144] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 10.653457] scsi0 : usb-storage 1-1.4:1.0
[ 10.653831] usbcore: registered new interface driver snd-usb-audio
[ 10.674581] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok
[ 10.687138] TCP: cubic registered
[ 10.695643] NET: Registered protocol family 10
[ 10.705925] sit: IPv6 over IPv4 tunneling driver
[ 10.716033] NET: Registered protocol family 17
[ 10.725560] 8021q: 802.1Q VLAN Support v1.8
[ 10.734818] Key type dns_resolver registered
[ 10.744294] Registering SWP/SWPB emulation handler
[ 10.754332] registered taskstats version 1
[ 10.764122] Key type encrypted registered
[ 10.773002] AppArmor: AppArmor sha1 policy hashing enabled
[ 10.783901] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
[ 10.797111] [DISP] boot_disp:0x0
[ 10.806006] [HDMI] power vcc-hdmi-33
[ 10.815099] [HDMI] cec support = 0
[ 10.847307] usb 4-1: new full-speed USB device number 2 using sunxi-ohci
[ 10.927027] sunxi-rtc 1f00000.rtc: setting system clock to 2016-08-01 12:45:11 UTC (1470055511)
[ 10.942098] input: sunxi-ths as /devices/virtual/input/input2
[ 10.953508] thermal thermal_zone0: failed to read out thermal zone 0
[ 10.965817] ALSA device list:
[ 10.973938] #0: sndhdmi
[ 10.981993] Freeing unused kernel memory: 520K (ffffffc0009dd000 - ffffffc000a5f000)
[ 11.055020] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 11.069862] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 11.084229] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.0/input/input3
[ 11.100446] hid-generic 0003:256C:006E.0001: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input0
[ 11.120941] input: HUION PenTablet as /devices/soc.0/1c1b000.ohci1-controller/usb4/4-1/4-1:1.1/input/input4
[ 11.137330] hid-generic 0003:256C:006E.0002: input: USB HID v1.11 Mouse [HUION PenTablet] on usb-sunxi-ohci-1/input1
[ 11.231180] usb 1-1.1.1: new low-speed USB device number 5 using sunxi-ehci
[ 11.358317] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input5
[ 11.377509] hid-generic 0003:1C4F:0002.0003: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input0
[ 11.398317] [ehci0-controller]: sunxi_usb_disable_ehci
[ 11.399309] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input6
[ 11.399439] hid-generic 0003:1C4F:0002.0004: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input1
[ 11.447778] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00
[ 11.464279] scene_lock_destroy name=ehci_standby
[ 11.475507] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
[ 11.488284] usb usb1: USB disconnect, device number 1
[ 11.499951] usb 1-1: USB disconnect, device number 2
[ 11.511472] usb 1-1.1: USB disconnect, device number 3
[ 11.526251] usb 1-1.1.2: new low-speed USB device number 6 using sunxi-ehci
[ 11.526325] usb 1-1.1.1: USB disconnect, device number 5
[ 11.526239] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
[ 11.900545] usb 1-1.4: USB disconnect, device number 4
[ 11.916552] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
[ 11.919471] ohci_irq: fullspeed or lowspeed device connect
[ 11.942658] [ohci0-controller]: sunxi_usb_disable_ohci
[ 11.954729] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660
[ 11.971564] scene_lock_destroy name=ohci_standby
[ 11.983239] sunxi-ohci 1c1a000.ohci0-controller: remove, state 84
[ 12.126492] usb usb3: USB disconnect, device number 1
[ 12.139120] sunxi-ohci 1c1a000.ohci0-controller: USB bus 3 deregistered
[ 12.153289] [ehci0-controller]: sunxi_usb_enable_ehci
[ 12.165783] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c62b00, 0x:ffffff80000aa000, irq_no:68
[ 12.186317] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.203634] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
[ 12.220929] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc000715d6c
[ 12.254397] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 12.269371] ehci_irq: highspeed device connect
[ 12.281853] hub 1-0:1.0: USB hub found
[ 12.293322] hub 1-0:1.0: 1 port detected
[ 12.304912] scene_lock_init name=ehci_standby
[ 12.316808] [ohci0-controller]: sunxi_usb_enable_ohci
[ 12.329455] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c62660
[ 12.342977] hdmi_clk_enable_prepare()L161
[ 12.358604] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 12.375561] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
[ 12.392453] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc000715d6c
[ 12.466062] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.482824] hub 3-0:1.0: USB hub found
[ 12.494479] hub 3-0:1.0: 1 port detected
[ 12.506408] scene_lock_init name=ohci_standby
[ 12.618513] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 12.777063] hub 1-1:1.0: USB hub found
[ 12.788911] hub 1-1:1.0: 4 ports detected
[ 12.802733] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 12.825494] systemd[1]: Detected architecture 'arm64'.
[ 12.875562] systemd[1]: Set hostname to <pine64>.
[ 13.110756] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
[ 13.229722] hub 1-1.1:1.0: USB hub found
[ 13.232817] systemd[1]: Expecting device dev-ttyS0.device...
[ 13.255713] hub 1-1.1:1.0: 4 ports detected
[ 13.287733] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.304153] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.320158] systemd[1]: Starting Remote File Systems (Pre).
[ 13.356530] systemd[1]: Reached target Remote File Systems (Pre).
[ 13.370828] usb 1-1.4: new high-speed USB device number 4 using sunxi-ehci
[ 13.370968] systemd[1]: Starting Encrypted Volumes.
[ 13.415555] systemd[1]: Reached target Encrypted Volumes.
[ 13.428912] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.445191] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.461119] systemd[1]: Starting Paths.
[ 13.484443] systemd[1]: Reached target Paths.
[ 13.496222] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.513531] systemd[1]: Expecting device dev-sda1.device...
[ 13.543495] systemd[1]: Expecting device dev-mmcblk0p1.device...
[ 13.559977] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 13.574421] scsi1 : usb-storage 1-1.4:1.0
[ 13.592766] systemd[1]: Starting Root Slice.
[ 13.622216] systemd[1]: Created slice Root Slice.
[ 13.633962] systemd[1]: Starting User and Session Slice.
[ 13.661598] systemd[1]: Created slice User and Session Slice.
[ 13.674389] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.700918] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.713567] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.750121] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.764094] systemd[1]: Starting Journal Socket (/dev/log).
[ 13.799320] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.812123] systemd[1]: Starting udev Control Socket.
[ 13.838683] systemd[1]: Listening on udev Control Socket.
[ 13.850782] usb 1-1.1.1: new low-speed USB device number 5 using sunxi-ehci
[ 13.864518] systemd[1]: Starting udev Kernel Socket.
[ 13.897727] systemd[1]: Listening on udev Kernel Socket.
[ 13.909678] systemd[1]: Starting Journal Socket.
[ 13.937081] systemd[1]: Listening on Journal Socket.
[ 13.948620] systemd[1]: Starting System Slice.
[ 13.976443] systemd[1]: Created slice System Slice.
[ 13.987604] systemd[1]: Started File System Check on Root Device.
[ 14.000055] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 14.019631] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7
[ 14.038737] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 14.051723] systemd[1]: Starting system-getty.slice.
[ 14.051758] hid-generic 0003:1C4F:0002.0005: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input0
[ 14.084918] input: SIGMACHIP USB Keyboard as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input8
[ 14.106314] hid-generic 0003:1C4F:0002.0006: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.1.1/input1
[ 14.125635] systemd[1]: Created slice system-getty.slice.
[ 14.137909] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 14.173266] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 14.186502] systemd[1]: Starting Increase datagram queue length...
[ 14.222493] usb 1-1.1.2: new low-speed USB device number 6 using sunxi-ehci
[ 14.238022] systemd[1]: Starting Restore / save the current clock...
[ 14.276783] systemd[1]: Starting Initialize Sunxi disp2 HDMI output mode...
[ 14.313024] systemd[1]: Mounting Huge Pages File System...
[ 14.347639] input: 2.4G RF MOUSE as /devices/soc.0/1c1a000.ehci0-controller/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input9
[ 14.366778] hid-generic 0003:2635:0601.0007: input: USB HID v1.11 Mouse [ 2.4G RF MOUSE] on usb-sunxi-ehci-1.1.2/input0
[ 14.407326] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.486462] systemd[1]: Started Set Up Additional Binary Formats.
[ 14.535690] systemd[1]: Starting Load Kernel Modules...
[ 14.560404] hdmi_clk_disable_prepare()L176
[ 14.568633] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.585751] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 14.605280] sd 1:0:0:0: [sda] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB)
[ 14.617700] systemd[1]: Starting udev Coldplug all Devices...
[ 14.633589] sd 1:0:0:0: [sda] Write Protect is off
[ 14.645551] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 14.646245] sd 1:0:0:0: [sda] No Caching mode page found
[ 14.657385] systemd[1]: Mounting Debug File System...
[ 14.670404] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 14.686580] sd 1:0:0:0: [sda] No Caching mode page found
[ 14.696787] systemd[1]: Starting Slices.
[ 14.704641] hdmi_clk_enable_prepare()L161
[ 14.720077] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 14.734252] systemd[1]: Reached target Slices.
[ 14.832627] systemd[1]: Mounted Debug File System.
[ 14.862155] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.891717] systemd[1]: Mounted Huge Pages File System.
[ 14.921177] systemd[1]: Started Increase datagram queue length.
[ 14.938351] sda: sda1 sda2
[ 14.949675] sd 1:0:0:0: [sda] No Caching mode page found
[ 14.955645] systemd[1]: Started Restore / save the current clock.
[ 14.971630] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 14.983076] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 14.999892] systemd[1]: Started Initialize Sunxi disp2 HDMI output mode.
[ 15.039343] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 15.044146] cfg80211: Calling CRDA to update world regulatory domain
[ 15.110219] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.139866] systemd[1]: Starting Syslog Socket.
[ 15.167189] systemd[1]: Listening on Syslog Socket.
[ 15.177413] systemd[1]: Starting Journal Service...
[ 15.226377] systemd[1]: Started Journal Service.
[ 15.238776] RTL871X: module init start
[ 15.247244] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
[ 15.258875] RTL871X: build time: Jul 16 2016 11:00:09
[ 15.268680] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
[ 15.280027] sunxi-wlan wlan.26: bus_index: 1
[ 15.289254] sunxi-wlan wlan.26: check wlan io_regulator voltage: 1800000
[ 15.354672] systemd-udevd[185]: starting version 215
[ 15.410374] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 15.410453] RTL871X: module init ret=0
[ 15.434201] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
[ 15.462354] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 15.492570] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 15.504142] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 15.516301] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 15.536891] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 15.554261] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
[ 15.565807] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 15.577788] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 15.590981] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 15.602052] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 15.613112] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 15.624374] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 15.635647] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 15.649421] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
[ 15.660259] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 15.676204] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
[ 15.689106] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 19.786177] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 20.334751] sunxi-bt bt.27: set block: 0
[ 20.338654] Mali: Set gpu frequency to 408 MHz
[ 20.338695] Mali: Init Mali gpu clocks successfully
[ 20.338806] gpu cooling callback register Success
[ 20.369171] sunxi-bt bt.27: check bluetooth io_regulator voltage: 1800000
[ 20.381980] Mali: Mali device driver loaded
[ 20.563227] cfg80211: World regulatory domain updated:
[ 20.572599] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.585397] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 20.597262] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 20.609025] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 20.620632] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 20.632165] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 20.643680] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 20.655276] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 20.666796] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 20.816170] gpu cooling callback set freq limit 0
[ 20.823575] sunxi cedar version 0.1
[ 20.823719] [cedar]: install start!!!
[ 20.823808] ycy the get irq is 90
[ 20.824078] ycy clk_bass_vir 0x18 is ffffff80026aa018, the value:3006207
[ 20.824080] ycy clk_bass_vir 0x13c is ffffff80026aa13c, the value:0
[ 20.824082] ycy clk_bass_vir 0x64 is ffffff80026aa064, the value:601810
[ 20.824084] ycy clk_bass_vir 0x2c4 is ffffff80026aa2c4, the value:601c10
[ 20.824086] ycy clk_bass_vir 0x100 is ffffff80026aa100, the value:0
[ 20.824087] [cedar]: install end!!!
[ 20.910242] Adding 1853436k swap on /dev/sda1. Priority:-1 extents:1 across:1853436k
[ 20.941781] Registered IR keymap rc_map_sunxi
[ 20.950579] input: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0/input10
[ 20.962358] rc0: sunxi_ir_recv as /devices/soc.0/1f02000.s_cir/rc/rc0
[ 21.015291] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input11
[ 21.029286] IR MCE Keyboard/mouse protocol handler initialized
[ 21.029296] IR NEC protocol handler initialized
[ 21.029551] IR RC5(x) protocol handler initialized
[ 21.076688] IR RC6 protocol handler initialized
[ 21.105740] IR JVC protocol handler initialized
[ 21.124393] lirc_dev: IR Remote Control driver registered, major 249
[ 21.152013] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0
[ 21.165869] IR LIRC bridge handler initialized
[ 21.165878] IR SANYO protocol handler initialized
[ 21.170523] IR Sony protocol handler initialized
[ 21.269426] [VFE]cci probe end cci_sel = 0!
[ 21.278349] [VFE]cci_init end
[ 21.656960] [VFE]Welcome to Video Front End driver
[ 21.668073] [VFE]csi probe end csi_sel = 0!
[ 21.676432] [VFE]csi_init end
[ 21.683628] [VFE]isp probe start isp_sel = 0!
[ 21.693105] [ISP] isp platform_id = 3!
[ 21.701930] [VFE]isp probe end isp_sel = 0!
[ 21.710041] [VFE]sunxi_isp_platform_register end
[ 21.718974] [VFE]mipi probe start mipi_sel = 0!
[ 21.727875] [VFE]mipi probe end mipi_sel = 0!
[ 21.736468] [VFE]mipi_init end
[ 21.743134] [VFE]flash_init end
[ 21.750775] [VFE]pdev->id = 0
[ 21.758127] [VFE]dev->vip_sel = 0
[ 21.766369] [VFE]vfe_init end
[ 21.772998] [VFE]probe_work_handle start!
[ 21.780838] [VFE]vfe_runtime_resume
[ 21.800990] [VFE]..........................vfe clk open!.......................
[ 21.812424] [VFE_WARN]vfe dphy clock is null
[ 21.819577] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 21.832792] [VFE]V4L2 device registered as (null)
[ 21.841442] [VFE]vfe_runtime_suspend
[ 21.850126] [VFE]..........................vfe clk close!.......................
[ 21.867886] [VFE]probe_work_handle end!
[ 24.710010] libphy: 1c30000.eth: probed
[ 24.714754] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00)
[ 24.886972] [DISP] disp_ioctl,line:1558:para err in disp_ioctl, cmd = 0x0,screen id = 65536
[ 29.631907] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full
[ 33.577824] Bluetooth: Core ver 2.16
[ 33.610356] NET: Registered protocol family 31
[ 33.617052] Bluetooth: HCI device and connection manager initialized
[ 33.624121] Bluetooth: HCI socket layer initialized
[ 33.629906] Bluetooth: L2CAP socket layer initialized
[ 33.635545] Bluetooth: SCO socket layer initialized
[ 36.608286] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.614163] Bluetooth: BNEP filters: protocol multicast
[ 36.620035] Bluetooth: BNEP socket layer initialized
[ 63.332546] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 67.430115] sunxi-bt bt.27: block state already is 0