[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.18.15-1-MANJARO-ARM (builduser@fh-mjr-build-lon-large) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Fri Jul 29 20:02:22 UTC 2022 [ 0.000000] Machine model: Pine64 PinePhone (1.2) [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xbfbb9040-0xbfbbafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] cma: Reserved 256 MiB at 0x00000000ad800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 20 pages/cpu s42984 r8192 d30744 u81920 [ 0.000000] pcpu-alloc: s42984 r8192 d30744 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: loglevel=4 console=tty0 console=ttyS0,115200 earlycon=uart,mmio32,0x01c28000 consoleblank=0 boot=PARTUUID=ed58b28e-01 root=PARTUUID=ed58b28e-02 rw rootwait quiet audit=0 bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash [ 0.000000] Unknown kernel command line parameters "boot=PARTUUID=ed58b28e-01 audit=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1767060K/2097152K available (12096K kernel code, 1256K rwdata, 3480K rodata, 2752K init, 399K bss, 67948K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1 [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000246] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000929] Console: colour dummy device 80x25 [ 0.000970] printk: console [tty0] enabled [ 0.001063] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001079] pid_max: default: 32768 minimum: 301 [ 0.001158] LSM: Security Framework initializing [ 0.001296] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001321] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003237] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003257] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003361] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003581] rcu: Hierarchical SRCU implementation. [ 0.005409] smp: Bringing up secondary CPUs ... [ 0.007176] Detected VIPT I-cache on CPU1 [ 0.007246] arch_timer: CPU1: Trapping CNTVCT access [ 0.007265] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.008441] Detected VIPT I-cache on CPU2 [ 0.008483] arch_timer: CPU2: Trapping CNTVCT access [ 0.008494] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.009439] Detected VIPT I-cache on CPU3 [ 0.009474] arch_timer: CPU3: Trapping CNTVCT access [ 0.009485] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.009563] smp: Brought up 1 node, 4 CPUs [ 0.009579] SMP: Total of 4 processors activated. [ 0.009586] CPU features: detected: 32-bit EL0 Support [ 0.009590] CPU features: detected: 32-bit EL1 Support [ 0.009597] CPU features: detected: CRC32 instructions [ 0.010196] CPU: All CPU(s) started at EL2 [ 0.010236] alternatives: patching kernel code [ 0.011935] devtmpfs: initialized [ 0.022215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022255] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033929] pinctrl core: initialized pinctrl subsystem [ 0.035559] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.037560] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.037784] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.037961] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.038585] thermal_sys: Registered thermal governor 'fair_share' [ 0.038592] thermal_sys: Registered thermal governor 'bang_bang' [ 0.038598] thermal_sys: Registered thermal governor 'step_wise' [ 0.038603] thermal_sys: Registered thermal governor 'power_allocator' [ 0.039051] cpuidle: using governor menu [ 0.039265] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.039391] ASID allocator initialised with 65536 entries [ 0.040586] Serial: AMBA PL011 UART driver [ 0.059410] platform 1ca0000.dsi: Fixing up cyclic dependency with 1c0c000.lcd-controller [ 0.060480] platform 1ee0000.hdmi: Fixing up cyclic dependency with 1c0d000.lcd-controller [ 0.064747] platform hdmi-connector: Fixing up cyclic dependency with 1ee0000.hdmi [ 0.077176] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.077200] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.077207] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.077215] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.077913] cryptd: max_cpu_qlen set to 1000 [ 0.080004] iommu: Default domain type: Translated [ 0.080019] iommu: DMA domain TLB invalidation policy: strict mode [ 0.080389] SCSI subsystem initialized [ 0.080665] usbcore: registered new interface driver usbfs [ 0.080712] usbcore: registered new interface driver hub [ 0.080793] usbcore: registered new device driver usb [ 0.081103] mc: Linux media interface: v0.10 [ 0.081163] videodev: Linux video capture interface: v2.00 [ 0.081198] pps_core: LinuxPPS API ver. 1 registered [ 0.081204] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.081223] PTP clock support registered [ 0.081405] EDAC MC: Ver: 3.0.0 [ 0.083162] clocksource: Switched to clocksource arch_sys_counter [ 0.083443] VFS: Disk quotas dquot_6.6.0 [ 0.083495] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.091471] NET: Registered PF_INET protocol family [ 0.091762] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.093343] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.093435] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.093454] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.093614] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.094005] TCP: Hash tables configured (established 16384 bind 16384) [ 0.094147] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.094213] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.094402] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.094872] RPC: Registered named UNIX socket transport module. [ 0.094880] RPC: Registered udp transport module. [ 0.094885] RPC: Registered tcp transport module. [ 0.094890] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.095303] Trying to unpack rootfs image as initramfs... [ 0.107301] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.108235] kvm [1]: IPA Size Limit: 40 bits [ 0.109329] kvm [1]: vgic interrupt IRQ9 [ 0.109523] kvm [1]: Hyp mode initialized successfully [ 0.111652] Initialise system trusted keyrings [ 0.111902] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 0.118609] zbud: loaded [ 0.120635] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.121710] NFS: Registering the id_resolver key type [ 0.121772] Key type id_resolver registered [ 0.121779] Key type id_legacy registered [ 0.121873] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.121888] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.122136] fuse: init (API version 7.36) [ 0.122462] 9p: Installing v9fs 9p2000 file system support [ 0.175695] NET: Registered PF_ALG protocol family [ 0.175734] Key type asymmetric registered [ 0.175741] Asymmetric key parser 'x509' registered [ 0.503561] Freeing initrd memory: 7176K [ 0.520216] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.520373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.545615] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.554508] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 0.554573] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 0.554627] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 0.554667] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 0.555101] lima 1c40000.gpu: bus rate = 200000000 [ 0.555113] lima 1c40000.gpu: mod rate = 297000000 [ 0.556062] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 0.564092] fbcon: Taking over console [ 0.565214] [drm] Initialized lima 1.2.0 20200215 for 1c40000.gpu on minor 0 [ 0.573752] loop: module loaded [ 0.578275] tun: Universal TUN/TAP device driver, 1.6 [ 0.580894] VFIO - User Level meta-driver version: 0.3 [ 0.582366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.582389] ehci-platform: EHCI generic platform driver [ 0.582631] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.582666] ohci-platform: OHCI generic platform driver [ 0.583410] usbcore: registered new interface driver usb-storage [ 0.587528] sun6i-rtc 1f00000.rtc: registered as rtc0 [ 0.587584] sun6i-rtc 1f00000.rtc: setting system clock to 2022-08-12T05:09:22 UTC (1660280962) [ 0.587766] sun6i-rtc 1f00000.rtc: RTC enabled [ 0.588026] i2c_dev: i2c /dev entries driver [ 0.592088] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com [ 0.593596] sdhci: Secure Digital Host Controller Interface driver [ 0.593621] sdhci: Copyright(c) Pierre Ossman [ 0.593849] Synopsys Designware Multimedia Card Interface Driver [ 0.595072] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.596582] ledtrig-cpu: registered to indicate activity on CPUs [ 0.597141] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.597245] hid: raw HID events driver (C) Jiri Kosina [ 0.598328] usbcore: registered new interface driver usbhid [ 0.598354] usbhid: USB HID core driver [ 0.600209] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 0.608472] Initializing XFRM netlink socket [ 0.609003] NET: Registered PF_INET6 protocol family [ 0.610273] Segment Routing with IPv6 [ 0.610320] In-situ OAM (IOAM) with IPv6 [ 0.613289] bpfilter: Loaded bpfilter_umh pid 524 [ 0.614157] NET: Registered PF_PACKET protocol family [ 0.614409] 9pnet: Installing 9P2000 support [ 0.614455] Key type dns_resolver registered [ 0.614922] registered taskstats version 1 [ 0.614941] Loading compiled-in X.509 certificates [ 0.615516] zswap: loaded using pool lzo/zbud [ 0.635620] sun8i-rotate 1020000.rotate: Device registered as /dev/video1 [ 0.636110] platform 1100000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller [ 0.636205] platform 1100000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller [ 0.637451] platform 1200000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller [ 0.637542] platform 1200000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller [ 0.641117] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.641485] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator [ 0.652440] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 0.653431] sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz [ 0.653859] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found [ 0.657121] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 [ 0.659064] axp20x-adc axp813-adc: DMA mask not set [ 0.660307] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 0.667782] axp20x-battery-power-supply axp20x-battery-power-supply: Configuring battery thermal regulation for Pinephone [ 0.668934] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 0.669047] axp20x-usb-power-supply axp20x-usb-power-supply: Increasing Vbus hold voltage to 4.5V [ 0.674193] dovdd-csi: Bringing 3300000uV into 1800000-1800000uV [ 0.678255] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV [ 0.680610] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV [ 0.681137] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded [ 0.685647] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.688084] printk: console [ttyS0] disabled [ 0.688188] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A [ 0.688273] printk: console [ttyS0] enabled [ 0.688282] printk: bootconsole [uart0] disabled [ 0.690056] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a 16550A [ 0.690286] serial serial0: tty port ttyS1 registered [ 0.691853] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 45, base_baud = 1500000) is a 16550A [ 0.696780] input: gpio-vibrator as /devices/platform/vibrator/input/input1 [ 0.795621] Goodix-TS 0-005d: ID 917S, version: 0200 [ 0.795846] Goodix-TS 0-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2 [ 0.796373] i2c 0-0028: Fixing up cyclic dependency with 1c19400.phy [ 0.802593] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input2 [ 0.810478] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq [ 0.810943] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.813629] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 0.813974] phy phy-1c19400.phy.1: Changing dr_mode to 1 [ 0.814196] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 0.815013] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 0.851612] mmc1: new high speed SDIO card at address 0001 [ 0.874753] mmc0: new high speed SDHC card at address aaaa [ 0.875597] mmcblk0: mmc0:aaaa SS16G 14.8 GiB [ 0.882483] mmcblk0: p1 p2 [ 1.007261] mmc2: new DDR MMC card at address 0001 [ 1.008402] mmcblk2: mmc2:0001 ISOCOM 14.5 GiB [ 1.037709] mmcblk2: p1 p2 [ 1.038936] mmcblk2boot0: mmc2:0001 ISOCOM 4.00 MiB [ 1.040410] mmcblk2boot1: mmc2:0001 ISOCOM 4.00 MiB [ 1.823254] ehci-platform 1c1a000.usb: EHCI Host Controller [ 1.823331] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 1.823561] ehci-platform 1c1a000.usb: irq 29, io mem 0x01c1a000 [ 1.839219] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 1.840365] hub 1-0:1.0: USB hub found [ 1.840440] hub 1-0:1.0: 1 port detected [ 1.841945] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.841988] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2 [ 1.842146] ehci-platform 1c1b000.usb: irq 31, io mem 0x01c1b000 [ 1.855190] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.856123] hub 2-0:1.0: USB hub found [ 1.856172] hub 2-0:1.0: 1 port detected [ 1.857678] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 1.857742] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 3 [ 1.857905] ohci-platform 1c1a400.usb: irq 30, io mem 0x01c1a400 [ 1.920133] hub 3-0:1.0: USB hub found [ 1.920198] hub 3-0:1.0: 1 port detected [ 1.921629] ohci-platform 1c1b400.usb: Generic Platform OHCI controller [ 1.921671] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 [ 1.921845] ohci-platform 1c1b400.usb: irq 32, io mem 0x01c1b400 [ 1.984120] hub 4-0:1.0: USB hub found [ 1.984179] hub 4-0:1.0: 1 port detected [ 1.988055] input: gpio-keys as /devices/platform/gpio-keys/input/input4 [ 1.989664] dw-apb-uart 1c28000.serial: forbid DMA for kernel console [ 1.991572] Freeing unused kernel memory: 2752K [ 2.011361] Run /init as init process [ 2.011373] with arguments: [ 2.011377] /init [ 2.011382] with environment: [ 2.011386] HOME=/ [ 2.011391] TERM=linux [ 2.011396] boot=PARTUUID=ed58b28e-01 [ 2.011402] audit=0 [ 2.693153] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input5 [ 2.703563] pinephone-keyboard 2-0015: error -ENXIO: Failed to read device ID [ 4.003977] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Quota mode: none. [ 4.409291] systemd[1]: systemd 251.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 4.410354] systemd[1]: Detected architecture arm64. [ 4.412746] systemd[1]: Hostname set to . [ 5.054074] systemd[1]: Queued start job for default target Graphical Interface. [ 5.059278] systemd[1]: Created slice Slice /system/getty. [ 5.061348] systemd[1]: Created slice Slice /system/modprobe. [ 5.062914] systemd[1]: Created slice Slice /system/serial-getty. [ 5.064167] systemd[1]: Created slice User and Session Slice. [ 5.064575] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.064826] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.065577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.065801] systemd[1]: Reached target Local Encrypted Volumes. [ 5.065932] systemd[1]: Reached target Local Integrity Protected Volumes. [ 5.066092] systemd[1]: Reached target Path Units. [ 5.066196] systemd[1]: Reached target Remote Encrypted Volumes. [ 5.066278] systemd[1]: Reached target Remote File Systems. [ 5.066351] systemd[1]: Reached target Slice Units. [ 5.066474] systemd[1]: Reached target Swaps. [ 5.066583] systemd[1]: Reached target Local Verity Protected Volumes. [ 5.067009] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.067645] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.073368] systemd[1]: Listening on Process Core Dump Socket. [ 5.079857] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). [ 5.080756] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.081350] systemd[1]: Listening on Journal Socket. [ 5.082078] systemd[1]: Listening on Network Service Netlink Socket. [ 5.082549] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. [ 5.083106] systemd[1]: Listening on udev Control Socket. [ 5.083641] systemd[1]: Listening on udev Kernel Socket. [ 5.084128] systemd[1]: Listening on User Database Manager Socket. [ 5.088500] systemd[1]: Mounting Huge Pages File System... [ 5.093068] systemd[1]: Mounting POSIX Message Queue File System... [ 5.098545] systemd[1]: Mounting Kernel Debug File System... [ 5.099319] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 5.105149] systemd[1]: Mounting Temporary Directory /tmp... [ 5.111462] systemd[1]: Starting Create List of Static Device Nodes... [ 5.117597] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.123972] systemd[1]: Starting Load Kernel Module configfs... [ 5.130285] systemd[1]: Starting Load Kernel Module drm... [ 5.136683] systemd[1]: Starting Load Kernel Module fuse... [ 5.147263] systemd[1]: Starting Journal Service... [ 5.156258] systemd[1]: Starting Load Kernel Modules... [ 5.162282] systemd[1]: Starting Generate network units from Kernel command line... [ 5.169164] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.169760] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. [ 5.176748] systemd[1]: Starting Coldplug All udev Devices... [ 5.188162] systemd[1]: Mounted Huge Pages File System. [ 5.189031] systemd[1]: Mounted POSIX Message Queue File System. [ 5.190051] systemd[1]: Mounted Kernel Debug File System. [ 5.191059] systemd[1]: Mounted Temporary Directory /tmp. [ 5.193405] systemd[1]: Finished Create List of Static Device Nodes. [ 5.209633] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 5.210585] systemd[1]: Finished Load Kernel Module configfs. [ 5.212512] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 5.213566] systemd[1]: Finished Load Kernel Module drm. [ 5.215797] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 5.216677] systemd[1]: Finished Load Kernel Module fuse. [ 5.217702] EXT4-fs (mmcblk2p2): re-mounted. Quota mode: none. [ 5.218505] systemd[1]: Finished Load Kernel Modules. [ 5.222198] systemd[1]: Finished Generate network units from Kernel command line. [ 5.224888] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.226760] systemd[1]: Reached target Preparation for Network. [ 5.232094] systemd[1]: Mounting FUSE Control File System... [ 5.237428] systemd[1]: Mounting Kernel Configuration File System... [ 5.238107] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes). [ 5.256417] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 5.256832] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 5.261498] systemd[1]: Starting Load/Save Random Seed... [ 5.266546] systemd[1]: Starting Apply Kernel Variables... [ 5.267032] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 5.280524] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.285302] systemd[1]: Mounted FUSE Control File System. [ 5.286822] systemd[1]: Mounted Kernel Configuration File System. [ 5.327314] systemd[1]: Finished Apply Kernel Variables. [ 5.358083] systemd[1]: Started Journal Service. [ 5.420500] systemd-journald[1893]: Received client request to flush runtime journal. [ 5.425020] systemd-journald[1893]: File /var/log/journal/475d411673be4223a17f5d4b83df5b29/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.063210] random: crng init done [ 6.221653] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.260223] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.477095] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.678092] i2c 3-003c: Fixing up cyclic dependency with 1cb0000.csi [ 6.682166] i2c 3-004c: Fixing up cyclic dependency with 1cb0000.csi [ 6.685699] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL) [ 7.255878] 8723cs: module is from the staging directory, the quality is unknown, you have been warned. [ 7.375110] musb-sunxi 1c19000.usb: Disabling musb host side code due to re-routed phy [ 7.376208] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 7.376586] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 7.421749] sun8i-di 1e00000.deinterlace: Device registered as /dev/video3 [ 7.465997] Bluetooth: Core ver 2.22 [ 7.466200] NET: Registered PF_BLUETOOTH protocol family [ 7.466207] Bluetooth: HCI device and connection manager initialized [ 7.466235] Bluetooth: HCI socket layer initialized [ 7.466247] Bluetooth: L2CAP socket layer initialized [ 7.466275] Bluetooth: SCO socket layer initialized [ 7.467299] anx7688 0-0028: power enabled [ 7.467605] anx7688 0-0028: Vendor id 0x1f29 [ 7.467993] dw-apb-uart 1c28c00.serial: failed to request DMA [ 7.483365] anx7688 0-0028: power disabled [ 7.502242] iio iio:device4: failed to read Who-Am-I register. [ 7.519054] anx7688 0-0028: enabling USB BC 1.2 detection [ 7.520134] anx7688 0-0028: plug irq (cd=1) [ 7.527910] zram: Added device: zram0 [ 7.536739] anx7688 0-0028: cable inserted [ 7.557273] zram0: detected capacity change from 0 to 6117400 [ 7.563077] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008ca1dd0) [ 7.565411] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff800008ca1dd0) [ 7.566216] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 7.566270] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff800008c9d438) [ 7.566682] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff800008c9d438) [ 7.566734] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffff800008ca0d48) [ 7.579326] anx7688 0-0028: power enabled [ 7.605304] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy) [ 7.606371] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver [ 7.607408] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff800008ca10f8) [ 7.627273] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 [ 7.627399] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 7.645084] Bluetooth: HCI UART driver ver 2.3 [ 7.645112] Bluetooth: HCI UART protocol H4 registered [ 7.647423] anx7688 0-0028: eeprom0 = 0x03 [ 7.647450] anx7688 0-0028: fw loaded after 40 ms [ 7.647618] anx7688 0-0028: OCM firmware loaded (version 0x2312) [ 7.649178] anx7688 0-0028: send pd packet cmd=0x00 05 00 32 90 01 26 12 [ 7.649681] SPI driver st-magn-spi has no spi_device_id for st,lis3mdl-magn [ 7.649702] SPI driver st-magn-spi has no spi_device_id for st,lsm303agr-magn [ 7.649714] SPI driver st-magn-spi has no spi_device_id for st,lsm9ds1-magn [ 7.666662] Bluetooth: HCI UART protocol LL registered [ 7.672266] dw-apb-uart 1c28400.serial: failed to request DMA [ 7.680363] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 7.690023] bootsplash: Loading splash file (606512 bytes) [ 7.690099] bootsplash: Loaded (606512 bytes, 2 pics, 76 blobs). [ 7.692633] anx7688 0-0028: send pd packet cmd=0x01 05 01 2c 91 01 26 16 [ 7.692706] Bluetooth: HCI UART protocol Broadcom registered [ 7.693184] anx7688 0-0028: send pd packet cmd=0x02 11 02 00 00 00 ec 00 00 00 00 00 00 00 00 39 00 00 51 77 [ 7.694046] anx7688 0-0028: send pd packet cmd=0x03 05 03 00 00 01 ff f8 [ 7.694699] anx7688 0-0028: OCM configuration completed [ 7.695798] sun8i-dw-hdmi 1ee0000.hdmi: EVENT=plugout [ 7.696544] Adding 3058696k swap on /dev/zram0. Priority:100 extents:1 across:3058696k SSFS [ 7.897812] Console: switching to colour frame buffer device 90x90 [ 7.897955] anx7688 0-0028: status changed to 0x00 [ 7.897967] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SRC.Open [ 7.897975] anx7688 0-0028: DP state changed to 0x0000 [ 7.897982] anx7688 0-0028: VCONN role change to SINK [ 7.898000] anx7688 0-0028: DATA role change requested to UFP [ 7.932016] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 7.963570] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599 [ 7.963675] panel-sitronix-st7703 1ca0000.dsi.0: 720x1440@60 24bpp dsi 4dl - ready [ 8.036672] i2c i2c-1: Added multiplexed i2c bus 5 [ 8.136214] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SNK.Default [ 8.310888] simple-amplifier audio-amplifier: supply VCC not found, using dummy regulator [ 8.325759] debugfs: File 'Bluetooth Playback' in directory 'dapm' already present! [ 8.435776] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8703 [ 8.440756] Bluetooth: hci0: RTL: chip_type status=0 type=5 [ 8.444919] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.444968] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_fw.bin [ 8.447231] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_config.bin [ 8.474139] debugfs: File 'Bluetooth Capture' in directory 'dapm' already present! [ 8.479384] Bluetooth: hci0: RTL: cfg_sz 63, total sz 19427 [ 8.512594] input: PinePhone Headset Jack as /devices/platform/sound/sound/card0/input6 [ 8.589309] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d [ 8.589355] anx7688 0-0028: received HARD_RST, idiot firmware is bored [ 8.671532] sun6i-csi 1cb0000.csi: creating ov5640 3-004c:0 -> sun6i-csi:0 link [ 8.671581] sun6i-csi 1cb0000.csi: creating gc2145 3-003c:0 -> sun6i-csi:0 link [ 8.735316] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 8.841215] Bluetooth: hci0: RTL: fw version 0xaa5ca4dc [ 9.327755] systemd-journald[1893]: File /var/log/journal/475d411673be4223a17f5d4b83df5b29/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 9.535515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.535552] Bluetooth: BNEP filters: protocol multicast [ 9.535580] Bluetooth: BNEP socket layer initialized [ 11.615735] anx7688 0-0028: updating power mode to USB, current limit 0mA (0 => BC1.2) [ 11.615838] anx7688 0-0028: enabling vbus_in power path [ 12.378621] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.502713] usb 2-1: USB disconnect, device number 2 [ 13.606186] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d [ 13.606222] anx7688 0-0028: received HARD_RST, idiot firmware is bored [ 16.290555] Bluetooth: RFCOMM TTY layer initialized [ 16.290608] Bluetooth: RFCOMM socket layer initialized [ 16.290653] Bluetooth: RFCOMM ver 1.11 [ 16.323815] ov5640 3-004c: ov5640_init_slave_id: failed with -6 [ 18.623519] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d [ 18.623552] anx7688 0-0028: received HARD_RST, idiot firmware is bored [ 19.844076] EXT4-fs (mmcblk0p2): recovery complete [ 19.844123] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 20.489226] rfkill: input handler disabled [ 27.725332] ov5640 3-004c: ov5640_init_slave_id: failed with -6 [ 27.824711] usb 2-1: new high-speed USB device number 3 using ehci-platform [ 28.119415] usbcore: registered new interface driver cdc_wdm [ 28.159711] qmi_wwan 2-1:1.4: cdc-wdm0: USB WDM device [ 28.169981] qmi_wwan 2-1:1.4 wwan0: register 'qmi_wwan' at usb-1c1b000.usb-1, WWAN/QMI device, a2:d9:22:cb:f4:14 [ 28.185039] usbcore: registered new interface driver option [ 28.185159] usbcore: registered new interface driver qmi_wwan [ 28.185199] usbserial: USB Serial support registered for GSM modem (1-port) [ 28.185533] option 2-1:1.0: GSM modem (1-port) converter detected [ 28.214562] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 28.223670] option 2-1:1.1: GSM modem (1-port) converter detected [ 28.231572] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 28.234624] option 2-1:1.2: GSM modem (1-port) converter detected [ 28.240519] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 28.242912] option 2-1:1.3: GSM modem (1-port) converter detected [ 28.247955] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 28.536322] systemd-journald[1893]: Time jumped backwards, rotating. [ 28.559843] ov5640 3-004c: ov5640_init_slave_id: failed with -6 [ 29.083806] ov5640 3-004c: ov5640_init_slave_id: failed with -6 [ 29.143851] ov5640 3-004c: ov5640_init_slave_id: failed with -6 [ 33.759229] ps: disabling [ 33.759345] dc1sw: disabling [ 33.759611] vcc-1v2-hsic: disabling