DDR Version V1.10 20210810 ln ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB tdqss: cs0 dqs0: 24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps, tdqss: cs1 dqs0: 24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps, change to: 324MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x62 change to: 528MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 780MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 1560MHz(final freq) PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:22% dram drv:40,odt:80 vref_ca:00000071 clk skew:0x26 cs 0: the read training result: DQS0:0x34, DQS1:0x34, DQS2:0x36, DQS3:0x2a, min :0x12 0xf 0x13 0x10 0x2 0x6 0x9 0x6 , 0xb 0xa 0x5 0x1 0xd 0xe 0x12 0xe , 0x17 0x13 0xd 0xd 0x4 0x0 0x6 0x8 , 0xd 0x9 0xa 0x1 0x11 0x11 0xe 0x12 , mid :0x29 0x29 0x2c 0x28 0x19 0x1f 0x21 0x1e ,0x23 0x23 0x1a 0x1a 0x25 0x26 0x28 0x25 , 0x2b 0x28 0x24 0x23 0x1a 0x18 0x19 0x1d ,0x23 0x1d 0x1a 0x14 0x22 0x25 0x23 0x26 , max :0x40 0x43 0x45 0x41 0x31 0x39 0x39 0x36 ,0x3b 0x3d 0x30 0x33 0x3e 0x3e 0x3f 0x3d , 0x3f 0x3d 0x3c 0x3a 0x31 0x31 0x2d 0x33 ,0x39 0x32 0x2a 0x27 0x34 0x39 0x39 0x3a , range:0x2e 0x34 0x32 0x31 0x2f 0x33 0x30 0x30 ,0x30 0x33 0x2b 0x32 0x31 0x30 0x2d 0x2f , 0x28 0x2a 0x2f 0x2d 0x2d 0x31 0x27 0x2b ,0x2c 0x29 0x20 0x26 0x23 0x28 0x2b 0x28 , the write training result: DQS0:0x2a, DQS1:0x13, DQS2:0x1d, DQS3:0x5, min :0x76 0x77 0x7a 0x77 0x66 0x6a 0x70 0x70 0x71 ,0x56 0x56 0x50 0x53 0x5a 0x5c 0x5f 0x5a 0x5a , 0x64 0x62 0x5d 0x5f 0x54 0x54 0x54 0x5a 0x5e ,0x4b 0x48 0x46 0x43 0x4e 0x4f 0x4c 0x52 0x4b , mid :0x91 0x93 0x95 0x92 0x7f 0x83 0x89 0x87 0x89 ,0x71 0x70 0x6a 0x6c 0x74 0x73 0x76 0x73 0x73 , 0x80 0x7d 0x77 0x78 0x6f 0x6c 0x6d 0x73 0x75 ,0x66 0x61 0x5f 0x5c 0x68 0x6b 0x64 0x6c 0x64 , max :0xad 0xaf 0xb0 0xad 0x99 0x9c 0xa3 0x9e 0xa1 ,0x8d 0x8b 0x84 0x85 0x8f 0x8b 0x8d 0x8d 0x8d , 0x9d 0x98 0x91 0x92 0x8a 0x85 0x86 0x8c 0x8d ,0x82 0x7b 0x78 0x76 0x83 0x87 0x7d 0x87 0x7d , range:0x37 0x38 0x36 0x36 0x33 0x32 0x33 0x2e 0x30 ,0x37 0x35 0x34 0x32 0x35 0x2f 0x2e 0x33 0x33 , 0x39 0x36 0x34 0x33 0x36 0x31 0x32 0x32 0x2f ,0x37 0x33 0x32 0x33 0x35 0x38 0x31 0x35 0x32 , cs 1: the read training result: DQS0:0x2e, DQS1:0x2f, DQS2:0x3a, DQS3:0x32, min : 0xf 0xe 0x12 0xe 0x1 0x2 0x8 0x2 , 0xc 0x9 0x7 0x1 0xe 0xe 0x14 0xe , 0x17 0x14 0xe 0xc 0x4 0x2 0x6 0xa , 0xe 0xa 0xc 0x2 0x12 0x12 0xe 0x13 , mid :0x24 0x25 0x28 0x23 0x15 0x19 0x1c 0x18 ,0x1f 0x1f 0x18 0x16 0x22 0x22 0x25 0x21 , 0x2e 0x2b 0x27 0x25 0x1c 0x1b 0x1c 0x20 ,0x27 0x23 0x20 0x18 0x28 0x29 0x27 0x2a , max :0x39 0x3c 0x3f 0x39 0x29 0x31 0x31 0x2f ,0x33 0x35 0x2a 0x2b 0x36 0x36 0x37 0x34 , 0x45 0x42 0x41 0x3e 0x35 0x35 0x33 0x36 ,0x40 0x3c 0x35 0x2f 0x3e 0x40 0x41 0x41 , range:0x2a 0x2e 0x2d 0x2b 0x28 0x2f 0x29 0x2d ,0x27 0x2c 0x23 0x2a 0x28 0x28 0x23 0x26 , 0x2e 0x2e 0x33 0x32 0x31 0x33 0x2d 0x2c ,0x32 0x32 0x29 0x2d 0x2c 0x2e 0x33 0x2e , the write training result: DQS0:0x2a, DQS1:0x13, DQS2:0x1d, DQS3:0x5, min :0x76 0x76 0x78 0x76 0x65 0x69 0x6f 0x6f 0x70 ,0x54 0x54 0x4f 0x50 0x57 0x5a 0x5c 0x58 0x57 , 0x68 0x67 0x62 0x63 0x5a 0x58 0x5a 0x5f 0x64 ,0x50 0x4e 0x4a 0x48 0x53 0x54 0x52 0x56 0x50 , mid :0x91 0x91 0x93 0x91 0x7f 0x83 0x89 0x86 0x88 ,0x70 0x6f 0x69 0x6a 0x73 0x72 0x74 0x72 0x71 , 0x84 0x82 0x7c 0x7d 0x74 0x71 0x72 0x77 0x7b ,0x6c 0x68 0x65 0x61 0x6d 0x6f 0x6a 0x71 0x69 , max :0xad 0xad 0xaf 0xad 0x9a 0x9d 0xa3 0x9e 0xa0 ,0x8d 0x8b 0x84 0x85 0x8f 0x8b 0x8d 0x8c 0x8c , 0xa1 0x9e 0x97 0x97 0x8f 0x8a 0x8a 0x90 0x92 ,0x89 0x83 0x81 0x7b 0x87 0x8a 0x82 0x8c 0x82 , range:0x37 0x37 0x37 0x37 0x35 0x34 0x34 0x2f 0x30 ,0x39 0x37 0x35 0x35 0x38 0x31 0x31 0x34 0x35 , 0x39 0x37 0x35 0x34 0x35 0x32 0x30 0x31 0x2e ,0x39 0x35 0x37 0x33 0x34 0x36 0x30 0x36 0x32 , CA Training result: cs:0 min :0x43 0x43 0x38 0x36 0x38 0x31 0x41 ,0x40 0x37 0x32 0x2f 0x34 0x2f 0x3e , cs:0 mid :0x81 0x83 0x76 0x75 0x74 0x71 0x70 ,0x7d 0x79 0x6f 0x6e 0x71 0x6e 0x6c , cs:0 max :0xbf 0xc3 0xb4 0xb5 0xb1 0xb2 0xa0 ,0xba 0xbb 0xad 0xad 0xaf 0xad 0x9a , cs:0 range:0x7c 0x80 0x7c 0x7f 0x79 0x81 0x5f ,0x7a 0x84 0x7b 0x7e 0x7b 0x7e 0x5c , cs:1 min :0x42 0x47 0x37 0x39 0x38 0x36 0x40 ,0x40 0x3e 0x34 0x35 0x34 0x35 0x40 , cs:1 mid :0x83 0x84 0x77 0x76 0x76 0x73 0x70 ,0x7e 0x7b 0x73 0x70 0x74 0x70 0x6e , cs:1 max :0xc4 0xc2 0xb7 0xb3 0xb5 0xb1 0xa1 ,0xbd 0xb9 0xb2 0xac 0xb4 0xab 0x9c , cs:1 range:0x82 0x7b 0x80 0x7a 0x7d 0x7b 0x61 ,0x7d 0x7b 0x7e 0x77 0x80 0x76 0x5c , out rockchip_sdram_size fdc20208 10000af1 rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0 SDRAM base=0, size=100000000 U-Boot SPL 2022.04-armbian (Apr 20 2022 - 14:38:50 +0300) saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss. Error: -38Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl NOTICE: BL31: Built : 10:51:13, Jul 15 2021 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2022.04-armbian (Apr 20 2022 - 14:38:50 +0300) Model: Pine64 RK3566 Quartz64-A Board DRAM: rockchip_sdram_size fdc20208 10000af1 rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0 SDRAM base=0, size=100000000 3.7 GiB PMIC: RK8170 (on=0x10, off=0x00) Core: 258 devices, 19 uclasses, devicetree: separate MMC: mmc@fe2b0000: 1, mmc@fe310000: 0 Loading Environment from nowhere... OK In: serial@fe660000 Out: serial@fe660000 Err: serial@fe660000 Model: Pine64 RK3566 Quartz64-A Board Net: No ethernet found. Hit any key to stop autoboot: 0 starting USB... Bus usb@fd800000: USB EHCI 1.00 Bus usb@fd840000: USB OHCI 1.0 Bus usb@fd880000: USB EHCI 1.00 Bus usb@fd8c0000: USB OHCI 1.0 scanning bus usb@fd800000 for devices... 1 USB Device(s) found scanning bus usb@fd840000 for devices... ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) unable to get device descriptor (error=-1) 1 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 1: LibreELEC Retrieving file: /KERNEL append: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyS2,1500000 console=tty0 systemd.debug_shell=ttyS2 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /dtb/rockchip/rk3566-quartz64-a.dtb Moving Image from 0x2080000 to 0x2200000, end=7590000 ## Flattened Device Tree blob at 0a100000 Booting using the fdt blob at 0xa100000 Loading Device Tree to 00000000edec6000, end 00000000edee5cde ... OK Starting kernel ... [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 1.921590] rockchip-usb2phy fe8a0000.usb2phy: failed to create phy [ 1.962221] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 2.246170] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.327064] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.445570] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active. [ 2.454659] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active. [ 3.873393] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [?25hLibreELEC:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 5.18.0-rc6 (user@user-VirtualBox) (aarch64-libreelec-linux-gnueabi-gcc-11.3.0 (GCC) 11.3.0, GNU ld (GNU Binutils) 2.37) #2 SMP PREEMPT Thu May 12 13:25:17 MSK 2022 [ 0.000000] Machine model: Pine64 RK3566 Quartz64-A Board [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 384 MiB at 0x00000000d2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80296 r8192 d30296 u118784 [ 0.000000] pcpu-alloc: s80296 r8192 d30296 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176 [ 0.000000] Kernel command line: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyS2,1500000 console=tty0 systemd.debug_shell=ttyS2 coherent_pool=2M cec.debounce_ms=5000 [ 0.000000] Unknown kernel command line parameters "boot=LABEL=LIBREELEC disk=LABEL=STORAGE", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3374864K/3930112K available (16960K kernel code, 3424K rwdata, 7012K rodata, 57088K init, 876K bss, 162032K reserved, 393216K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x180 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @4e0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @4f0000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 0.000000] GICv3: using LPI property table @0x0000000000500000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000510000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001804] Console: colour dummy device 80x25 [ 0.001868] printk: console [tty0] enabled [ 0.001922] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001944] pid_max: default: 32768 minimum: 301 [ 0.002121] LSM: Security Framework initializing [ 0.002293] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002328] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004749] cblist_init_generic: Setting adjustable number of callback queues. [ 0.004769] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.004923] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005074] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005430] rcu: Hierarchical SRCU implementation. [ 0.006417] Platform MSI: interrupt-controller@fd440000 domain created [ 0.006897] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 0.009285] EFI services will not be available. [ 0.009984] smp: Bringing up secondary CPUs ... [ 0.010962] Detected VIPT I-cache on CPU1 [ 0.011015] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.011037] GICv3: CPU1: using allocated LPI pending table @0x0000000000520000 [ 0.011105] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.012178] Detected VIPT I-cache on CPU2 [ 0.012224] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.012245] GICv3: CPU2: using allocated LPI pending table @0x0000000000530000 [ 0.012296] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.013330] Detected VIPT I-cache on CPU3 [ 0.013372] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.013392] GICv3: CPU3: using allocated LPI pending table @0x0000000000540000 [ 0.013442] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.013610] smp: Brought up 1 node, 4 CPUs [ 0.013632] SMP: Total of 4 processors activated. [ 0.013641] CPU features: detected: 32-bit EL0 Support [ 0.013646] CPU features: detected: 32-bit EL1 Support [ 0.013654] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.013660] CPU features: detected: Common not Private translations [ 0.013666] CPU features: detected: CRC32 instructions [ 0.013675] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.013680] CPU features: detected: LSE atomic instructions [ 0.013686] CPU features: detected: Privileged Access Never [ 0.013691] CPU features: detected: RAS Extension Support [ 0.013698] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.037172] CPU: All CPU(s) started at EL2 [ 0.040353] devtmpfs: initialized [ 0.064602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.064642] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.076200] pinctrl core: initialized pinctrl subsystem [ 0.077228] DMI not present or invalid. [ 0.077825] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.080518] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.081142] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.082216] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.082386] audit: initializing netlink subsys (disabled) [ 0.082675] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 [ 0.083930] thermal_sys: Registered thermal governor 'fair_share' [ 0.083941] thermal_sys: Registered thermal governor 'bang_bang' [ 0.083949] thermal_sys: Registered thermal governor 'step_wise' [ 0.083955] thermal_sys: Registered thermal governor 'user_space' [ 0.083960] thermal_sys: Registered thermal governor 'power_allocator' [ 0.084837] cpuidle: using governor ladder [ 0.084883] cpuidle: using governor menu [ 0.085238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.085454] ASID allocator initialised with 65536 entries [ 0.087480] Serial: AMBA PL011 UART driver [ 0.107534] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop [ 0.153599] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.154639] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.155615] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.156498] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.157465] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.161840] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi [ 0.195470] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.195493] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.195504] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.195513] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.196688] cryptd: max_cpu_qlen set to 1000 [ 0.198959] ACPI: Interpreter disabled. [ 0.204254] iommu: Default domain type: Translated [ 0.204274] iommu: DMA domain TLB invalidation policy: strict mode [ 0.204909] SCSI subsystem initialized [ 0.205155] libata version 3.00 loaded. [ 0.205561] usbcore: registered new interface driver usbfs [ 0.205630] usbcore: registered new interface driver hub [ 0.205699] usbcore: registered new device driver usb [ 0.206627] pps_core: LinuxPPS API ver. 1 registered [ 0.206638] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.206663] PTP clock support registered [ 0.207038] EDAC MC: Ver: 3.0.0 [ 0.208117] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16 [ 0.208310] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.208393] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.209607] FPGA manager framework [ 0.210607] NetLabel: Initializing [ 0.210616] NetLabel: domain hash size = 128 [ 0.210624] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.210706] NetLabel: unlabeled traffic allowed by default [ 0.210914] vgaarb: loaded [ 0.211508] clocksource: Switched to clocksource arch_sys_counter [ 0.297904] VFS: Disk quotas dquot_6.6.0 [ 0.297996] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.298124] FS-Cache: Loaded [ 0.298426] pnp: PnP ACPI: disabled [ 0.311691] NET: Registered PF_INET protocol family [ 0.312006] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.314730] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.314872] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.315142] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.315600] TCP: Hash tables configured (established 32768 bind 32768) [ 0.315778] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.315872] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.316210] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.316918] RPC: Registered named UNIX socket transport module. [ 0.316930] RPC: Registered udp transport module. [ 0.316937] RPC: Registered tcp transport module. [ 0.316943] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.316955] NET: Registered PF_XDP protocol family [ 0.316972] PCI: CLS 0 bytes, default 64 [ 0.341904] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.343138] kvm [1]: IPA Size Limit: 40 bits [ 0.343221] kvm [1]: GICv3: no GICV resource entry [ 0.343235] kvm [1]: disabling GICv2 emulation [ 0.343268] kvm [1]: GIC system register CPU interface enabled [ 0.343564] kvm [1]: vgic interrupt IRQ9 [ 0.343891] kvm [1]: VHE mode initialized successfully [ 0.347423] Initialise system trusted keyrings [ 0.347494] Key type blacklist registered [ 0.347951] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.358728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.360488] NFS: Registering the id_resolver key type [ 0.360544] Key type id_resolver registered [ 0.360552] Key type id_legacy registered [ 0.360685] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.360696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.362388] Key type cifs.idmap registered [ 0.418296] xor: measuring software checksum speed [ 0.424118] 8regs : 1720 MB/sec [ 0.430387] 32regs : 1575 MB/sec [ 0.436962] arm64_neon : 1510 MB/sec [ 0.436981] xor: using function: 8regs (1720 MB/sec) [ 0.437002] Key type asymmetric registered [ 0.437009] Asymmetric key parser 'x509' registered [ 1.913417] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.913549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.913763] io scheduler mq-deadline registered [ 1.913778] io scheduler kyber registered [ 1.913983] io scheduler bfq registered [ 1.921590] rockchip-usb2phy fe8a0000.usb2phy: failed to create phy [ 1.940146] EINJ: ACPI disabled. [ 1.954136] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.954161] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.957197] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.957214] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.962221] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 1.967942] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.971617] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 25, base_baud = 1500000) is a 16550A [ 1.973497] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 50, base_baud = 1500000) is a 16550A [ 1.973714] serial serial0: tty port ttyS1 registered [ 1.974964] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 51, base_baud = 1500000) is a 16550A [ 1.976838] printk: console [ttyS2] enabled [ 1.978520] Serial: AMBA driver [ 1.981912] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.994538] brd: module loaded [ 2.003311] loop: module loaded [ 2.005579] megasas: 07.719.03.00-rc1 [ 2.015578] tun: Universal TUN/TAP device driver, 1.6 [ 2.016731] thunder_xcv, ver 1.0 [ 2.016802] thunder_bgx, ver 1.0 [ 2.016861] nicpf, ver 1.0 [ 2.018237] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.018248] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.018349] hclge is initializing [ 2.018374] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.018382] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.018439] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.018447] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.018821] sky2: driver version 1.30 [ 2.021033] VFIO - User Level meta-driver version: 0.3 [ 2.024211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.024253] ehci-pci: EHCI PCI platform driver [ 2.024322] ehci-platform: EHCI generic platform driver [ 2.026833] ehci-platform fd800000.usb: EHCI Host Controller [ 2.026886] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 2.027064] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 2.051538] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.051895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.051914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.051925] usb usb1: Product: EHCI Host Controller [ 2.051934] usb usb1: Manufacturer: Linux 5.18.0-rc6 ehci_hcd [ 2.051943] usb usb1: SerialNumber: fd800000.usb [ 2.052659] hub 1-0:1.0: USB hub found [ 2.052719] hub 1-0:1.0: 1 port detected [ 2.055654] ehci-platform fd880000.usb: EHCI Host Controller [ 2.055694] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [ 2.055848] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000 [ 2.081593] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 2.081934] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.081952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.081964] usb usb2: Product: EHCI Host Controller [ 2.081973] usb usb2: Manufacturer: Linux 5.18.0-rc6 ehci_hcd [ 2.081982] usb usb2: SerialNumber: fd880000.usb [ 2.082634] hub 2-0:1.0: USB hub found [ 2.082698] hub 2-0:1.0: 1 port detected [ 2.083659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.083691] ohci-pci: OHCI PCI platform driver [ 2.083816] ohci-platform: OHCI generic platform driver [ 2.084261] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.084292] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [ 2.084470] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 2.155811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.155830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.155843] usb usb3: Product: Generic Platform OHCI controller [ 2.155852] usb usb3: Manufacturer: Linux 5.18.0-rc6 ohci_hcd [ 2.155860] usb usb3: SerialNumber: fd840000.usb [ 2.156532] hub 3-0:1.0: USB hub found [ 2.156591] hub 3-0:1.0: 1 port detected [ 2.157423] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 2.157452] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.157620] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000 [ 2.225822] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.225841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.225852] usb usb4: Product: Generic Platform OHCI controller [ 2.225862] usb usb4: Manufacturer: Linux 5.18.0-rc6 ohci_hcd [ 2.225871] usb usb4: SerialNumber: fd8c0000.usb [ 2.226567] hub 4-0:1.0: USB hub found [ 2.226632] hub 4-0:1.0: 1 port detected [ 2.228637] usbcore: registered new interface driver usb-storage [ 2.232078] mousedev: PS/2 mouse device common for all mice [ 2.234166] i2c_dev: i2c /dev entries driver [ 2.236679] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected! [ 2.246170] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.247827] rk808 0-0020: chip id: 0x8170 [ 2.281454] random: fast init done [ 2.327064] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.328079] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.328116] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.328129] rk808-regulator rk808-regulator: max buck steps per change: 8 [ 2.398183] boost: Bringing 4700000uV into 5000000-5000000uV [ 2.412992] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0 [ 2.425408] rk808-rtc rk808-rtc: registered as rtc0 [ 2.428153] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:24 UTC (1501923624) [ 2.445570] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active. [ 2.448664] sdhci: Secure Digital Host Controller Interface driver [ 2.448672] sdhci: Copyright(c) Pierre Ossman [ 2.449002] Synopsys Designware Multimedia Card Interface Driver [ 2.449974] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.450685] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 2.450712] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 2.450719] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 2.450766] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo [ 2.451699] ledtrig-cpu: registered to indicate activity on CPUs [ 2.451887] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 2.451899] mmc_host mmc2: card is non-removable. [ 2.452504] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.452681] hid: raw HID events driver (C) Jiri Kosina [ 2.452798] usbcore: registered new interface driver usbhid [ 2.452803] usbhid: USB HID core driver [ 2.454659] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active. [ 2.457469] NET: Registered PF_INET6 protocol family [ 2.463028] Segment Routing with IPv6 [ 2.463076] In-situ OAM (IOAM) with IPv6 [ 2.463134] NET: Registered PF_PACKET protocol family [ 2.463260] 8021q: 802.1Q VLAN Support v1.8 [ 2.463305] Key type dns_resolver registered [ 2.463914] registered taskstats version 1 [ 2.463929] Loading compiled-in X.509 certificates [ 2.517263] reg-fixed-voltage vcc5v0_usb20_otg: nonexclusive access to GPIO for vcc5v0_usb20_otg [ 2.523369] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 2.523406] rockchip-dw-pcie 3c0000000.pcie: IO 0x0301000000..0x03010fffff -> 0x0001000000 [ 2.523421] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0302000000..0x033fffffff -> 0x0002000000 [ 2.523507] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled [ 2.523512] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 2.581745] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.702413] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 2.781637] usb 4-1: new full-speed USB device number 2 using ohci-platform [ 3.058699] usb 4-1: New USB device found, idVendor=1d57, idProduct=ad03, bcdDevice= 2.00 [ 3.058742] usb 4-1: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.058766] usb 4-1: Manufacturer: FREEWAY TECHNOLOGY [ 3.070682] input: FREEWAY TECHNOLOGY Keyboard as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.2/0003:1D57:AD03.0001/input/input1 [ 3.132731] input: FREEWAY TECHNOLOGY as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.2/0003:1D57:AD03.0001/input/input2 [ 3.133599] hid-generic 0003:1D57:AD03.0001: input,hiddev0,hidraw0: USB HID v1.01 Keyboard [FREEWAY TECHNOLOGY] on usb-fd8c0000.usb-1/input2 [ 3.138877] input: FREEWAY TECHNOLOGY as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.3/0003:1D57:AD03.0002/input/input4 [ 3.139614] hid-generic 0003:1D57:AD03.0002: input,hidraw1: USB HID v1.01 Mouse [FREEWAY TECHNOLOGY] on usb-fd8c0000.usb-1/input3 [ 3.642001] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up [ 3.642458] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 3.642492] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.642526] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x1000000-0x10fffff]) [ 3.642552] pci_bus 0000:00: root bus resource [mem 0x302000000-0x33fffffff] (bus address [0x02000000-0x3fffffff]) [ 3.642662] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 [ 3.642756] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.642985] pci 0000:00:00.0: supports D1 D2 [ 3.643006] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.657995] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 3.668762] pci 0000:00:00.0: BAR 6: assigned [mem 0x302000000-0x30200ffff pref] [ 3.668808] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.674761] pcieport 0000:00:00.0: PME: Signaling with IRQ 90 [ 3.675060] pcieport 0000:00:00.0: AER: enabled with IRQ 99 [ 3.685644] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 3.686381] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 3.686389] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30). [ 3.686395] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10). [ 3.686403] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 3.686441] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 3.691452] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 3.691737] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 3.691751] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 3.691759] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 3.691765] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 3.691769] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 3.691773] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 3.691826] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 3.691832] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.691844] rk_gmac-dwmac fe010000.ethernet: device MAC address 4e:cf:47:16:d4:ec [ 3.691853] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 3.691859] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 3.691864] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width [ 3.869703] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.869779] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5 [ 3.870077] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.870241] xhci-hcd xhci-hcd.1.auto: irq 18, io mem 0xfcc00000 [ 3.871263] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 3.871299] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.871324] usb usb5: Product: xHCI Host Controller [ 3.871345] usb usb5: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.871364] usb usb5: SerialNumber: xhci-hcd.1.auto [ 3.872234] hub 5-0:1.0: USB hub found [ 3.872276] hub 5-0:1.0: 1 port detected [ 3.872620] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.872638] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6 [ 3.872659] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.872741] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.872882] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 3.872893] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.872901] usb usb6: Product: xHCI Host Controller [ 3.872906] usb usb6: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.872912] usb usb6: SerialNumber: xhci-hcd.1.auto [ 3.873347] hub 6-0:1.0: USB hub found [ 3.873393] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 3.877937] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.877961] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 7 [ 3.878105] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.878167] xhci-hcd xhci-hcd.2.auto: irq 19, io mem 0xfd000000 [ 3.878540] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 3.878552] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.878559] usb usb7: Product: xHCI Host Controller [ 3.878564] usb usb7: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.878570] usb usb7: SerialNumber: xhci-hcd.2.auto [ 3.879010] hub 7-0:1.0: USB hub found [ 3.879056] hub 7-0:1.0: 1 port detected [ 3.879369] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.879385] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 8 [ 3.879400] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 3.879479] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.879617] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 3.879628] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.879635] usb usb8: Product: xHCI Host Controller [ 3.879640] usb usb8: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.879645] usb usb8: SerialNumber: xhci-hcd.2.auto [ 3.880071] hub 8-0:1.0: USB hub found [ 3.880117] hub 8-0:1.0: 1 port detected [ 3.881458] ------------[ cut here ]------------ [ 3.881466] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1654 __queue_delayed_work+0xb0/0xd4 [ 3.881490] Modules linked in: [ 3.881501] CPU: 0 PID: 219 Comm: irq/53-rockchip Not tainted 5.18.0-rc6 #2 [ 3.881509] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.881514] pstate: 004000c9 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.881521] pc : __queue_delayed_work+0xb0/0xd4 [ 3.881529] lr : queue_delayed_work_on+0x54/0x9c [ 3.881537] sp : ffff80000e72bc30 [ 3.881540] x29: ffff80000e72bc30 x28: 0000000000000000 x27: 0000000000000000 [ 3.881552] x26: ffff800008116650 x25: 0000000000000009 x24: 0000000000000009 [ 3.881563] x23: 0000000000000001 x22: ffff80000915e600 x21: ffff000007c44880 [ 3.881574] x20: ffff000007c44a58 x19: 0000000000000000 x18: 00000000a45cd566 [ 3.881584] x17: 000000000000001c x16: 000000007cc64ab4 x15: 00000000001b7740 [ 3.881595] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.881605] x11: 000000000000000a x10: 0000000000000a40 x9 : ffff80000e72bcc0 [ 3.881615] x8 : ffff00000780d320 x7 : ffff0000ef76f600 x6 : 0000000000000000 [ 3.881625] x5 : ffff8000080bddd0 x4 : 0000000000000100 x3 : 0000000000000000 [ 3.881635] x2 : ffff000007c44a98 x1 : ffff000000406800 x0 : ffff000007c44ab8 [ 3.881646] Call trace: [ 3.881649] __queue_delayed_work+0xb0/0xd4 [ 3.881657] queue_delayed_work_on+0x54/0x9c [ 3.881664] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.881674] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.881681] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.881687] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.881693] irq_thread_fn+0x2c/0x9c [ 3.881703] irq_thread+0x174/0x220 [ 3.881706] printk: console [netcon0] enabled [ 3.881709] kthread+0xf4/0x100 [ 3.881716] netconsole: network logging started [ 3.881717] ret_from_fork+0x10/0x20 [ 3.881727] ---[ end trace 0000000000000000 ]--- [ 3.881737] ------------[ cut here ]------------ [ 3.881740] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1656 __queue_delayed_work+0x8c/0xd4 [ 3.881752] Modules linked in: [ 3.881757] CPU: 0 PID: 219 Comm: irq/53-rockchip Tainted: G W 5.18.0-rc6 #2 [ 3.881763] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.881767] pstate: 004000c9 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.881773] pc : __queue_delayed_work+0x8c/0xd4 [ 3.881780] lr : queue_delayed_work_on+0x54/0x9c [ 3.881787] sp : ffff80000e72bc30 [ 3.881790] x29: ffff80000e72bc30 x28: 0000000000000000 x27: 0000000000000000 [ 3.881802] x26: ffff800008116650 x25: 0000000000000009 x24: 0000000000000009 [ 3.881812] x23: 0000000000000001 x22: ffff80000915e600 x21: ffff000007c44880 [ 3.881823] x20: ffff000007c44a58 x19: 0000000000000000 x18: 00000000a45cd566 [ 3.881833] x17: 000000000000001c x16: 000000007cc64ab4 x15: 00000000001b7740 [ 3.881844] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.881854] x11: 000000000000000a x10: 0000000000000a40 x9 : ffff80000e72bcc0 [ 3.881864] x8 : ffff00000780d320 x7 : ffff0000ef76f600 x6 : 0000000000000000 [ 3.881874] x5 : ffff000007c44aa0 x4 : 0000000000000100 x3 : 0000000000000000 [ 3.881884] x2 : ffff000007c44a98 x1 : ffff000000406800 x0 : ffff000007c44ab8 [ 3.881894] Call trace: [ 3.881897] __queue_delayed_work+0x8c/0xd4 [ 3.881905] queue_delayed_work_on+0x54/0x9c [ 3.881912] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.881920] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.881927] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.881933] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.881939] irq_thread_fn+0x2c/0x9c [ 3.881947] irq_thread+0x174/0x220 [ 3.881953] kthread+0xf4/0x100 [ 3.881958] ret_from_fork+0x10/0x20 [ 3.881966] ---[ end trace 0000000000000000 ]--- [ 3.881977] ------------[ cut here ]------------ [ 3.881980] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1499 __queue_work+0x4bc/0x5a0 [ 3.881991] Modules linked in: [ 3.881996] CPU: 0 PID: 219 Comm: irq/53-rockchip Tainted: G W 5.18.0-rc6 #2 [ 3.882002] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.882006] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.882012] pc : __queue_work+0x4bc/0x5a0 [ 3.882019] lr : __queue_work+0x1f4/0x5a0 [ 3.882025] sp : ffff80000e72bbc0 [ 3.882028] x29: ffff80000e72bbc0 x28: ffff0000ef76f000 x27: ffff80000cba8008 [ 3.882039] x26: ffff80000cf5a208 x25: 0000000000000100 x24: ffff80000cba8008 [ 3.882050] x23: ffff000007c44aa0 x22: 000000000000000f x21: ffff000000406800 [ 3.882060] x20: ffff0000ef772f00 x19: ffff000007c44a98 x18: 00000000a45cd566 [ 3.882071] x17: 000000000000001c x16: 000000007cc64ab4 x15: 00000000001b7740 [ 3.882081] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.882091] x11: 0000000000000040 x10: ffff80000cf778f8 x9 : ffff80000cf778f0 [ 3.882102] x8 : ffff000000800028 x7 : 0000000000000000 x6 : 0000000000000001 [ 3.882111] x5 : ffff80000e72c000 x4 : ffff80000e72bb30 x3 : 0000000000000000 [ 3.882121] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000000 [ 3.882131] Call trace: [ 3.882134] __queue_work+0x4bc/0x5a0 [ 3.882141] __queue_delayed_work+0x80/0xd4 [ 3.882148] queue_delayed_work_on+0x54/0x9c [ 3.882155] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.882162] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.882169] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.882175] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.882181] irq_thread_fn+0x2c/0x9c [ 3.882188] irq_thread+0x174/0x220 [ 3.882194] kthread+0xf4/0x100 [ 3.882200] ret_from_fork+0x10/0x20 [ 3.882206] ---[ end trace 0000000000000000 ]--- [ 3.882321] psci_checker: PSCI checker started using 4 CPUs [ 3.882329] psci_checker: Starting hotplug tests [ 3.882336] psci_checker: Trying to turn off and on again all CPUs [ 3.882944] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 3.882979] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 3.882990] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 3.883053] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo [ 3.883531] psci: CPU0 killed (polled 0 ms) [ 3.884769] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 3.887314] psci: CPU1 killed (polled 0 ms) [ 3.889050] psci: CPU2 killed (polled 0 ms) [ 3.891221] Detected VIPT I-cache on CPU0 [ 3.891276] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 3.891373] CPU0: Booted secondary processor 0x0000000000 [0x412fd050] [ 3.893399] Detected VIPT I-cache on CPU1 [ 3.893452] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 3.893540] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 3.896771] Detected VIPT I-cache on CPU2 [ 3.896798] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 3.896850] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 3.897785] psci_checker: Trying to turn off and on again group 0 (CPUs 0-3) [ 3.898261] psci: CPU0 killed (polled 0 ms) [ 3.901352] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.902288] psci: CPU1 killed (polled 0 ms) [ 3.905359] psci: CPU2 killed (polled 0 ms) [ 3.907002] Detected VIPT I-cache on CPU0 [ 3.907055] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 3.907151] CPU0: Booted secondary processor 0x0000000000 [0x412fd050] [ 3.909646] Detected VIPT I-cache on CPU1 [ 3.909694] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 3.909779] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 3.913201] Detected VIPT I-cache on CPU2 [ 3.913232] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 3.913292] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 3.914284] psci_checker: Hotplug tests passed OK [ 3.914289] psci_checker: Starting suspend tests (10 cycles per state) [ 3.914317] psci_checker: cpuidle not available on CPU 0, ignoring [ 3.914321] psci_checker: cpuidle not available on CPU 1, ignoring [ 3.914324] psci_checker: cpuidle not available on CPU 2, ignoring [ 3.914326] psci_checker: cpuidle not available on CPU 3, ignoring [ 3.914330] psci_checker: Could not start suspend tests on any CPU [ 3.914332] psci_checker: PSCI checker completed [ 3.940218] Freeing unused kernel memory: 57088K [ 3.969033] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 3.989057] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 302 [ 3.989082] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 [ 3.989916] mmcblk0: mmc0:59b4 EC1S5 59.7 GiB [ 3.992008] mmcblk0: p1 p2 [ 4.001576] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 266 [ 4.001759] Run /init as init process [ 4.001771] with arguments: [ 4.001801] /init [ 4.001810] with environment: [ 4.001835] HOME=/ [ 4.001844] TERM=linux [ 4.001850] boot=LABEL=LIBREELEC [ 4.001876] disk=LABEL=STORAGE [ 4.008553] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 4.083271] rockchip-vop2 fe040000.vop: Adding to iommu group 1 [ 4.088281] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops [rockchipdrm]) [ 4.089774] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 4.090282] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 4.090792] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) [ 4.091240] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 4.395995] Console: switching to colour frame buffer device 170x48 [ 4.444004] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 4.506827] Checking disk(s): LABEL=LIBREELEC LABEL=STORAGE [ 4.668135] fsck: STORAGE: clean, 12/8192 files, 6938/32768 blocks [ 4.668284] fsck: fsck.fat 4.2 (2021-01-31) [ 4.668455] fsck: /dev/mmcblk0p1: 80 files, 33158/65501 clusters [ 4.778335] loop0: detected capacity change from 0 to 340808 [ 4.863948] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 5.056736] kernel-overlays-setup: setup base modules [ 5.478673] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.18.0-rc6 [ 5.552515] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 5.552756] kernel-overlays-setup: done [ 5.937189] systemd[1]: System time before build time, advancing clock. [ 6.009746] systemd[1]: systemd 250.5 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 6.010421] systemd[1]: Detected architecture arm64. [ 6.010543] systemd[1]: Detected first boot. [ 6.063345] systemd[1]: Cannot open /etc/machine-id: No such file or directory [ 6.505705] systemd[1]: Populated /etc with preset unit settings. [ 6.613176] systemd[1]: Queued start job for default target FS Resize target. [ 6.647666] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 6.647952] systemd[1]: Started Early root shell on /dev/ttyS2 FOR DEBUGGING ONLY. [ 6.651271] systemd[1]: Started FS Resize. [ 6.651473] systemd[1]: Reached target FS Resize target. [ 6.651643] systemd[1]: Startup finished in 5.933s (kernel) + 717ms (userspace) = 6.650s. [ 6.652263] systemd[1]: System is tainted: cgroupsv1:var-run-bad [ 6.791543] systemd[1]: storage.mount: Deactivated successfully. LibreELEC:/ # [ 25.932600] reboot: Restarting system DDR Version V1.10 20210810 ln ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB tdqss: cs0 dqs0: 24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps, tdqss: cs1 dqs0: 24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps, change to: 324MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x62 change to: 528MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 780MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 1560MHz(final freq) PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:22% dram drv:40,odt:80 vref_ca:00000071 clk skew:0x21 cs 0: the read training result: DQS0:0x35, DQS1:0x36, DQS2:0x38, DQS3:0x2b, min :0x12 0xe 0x13 0xf 0x2 0x5 0x9 0x5 , 0xc 0xb 0x5 0x2 0xe 0xf 0x14 0xe , 0x19 0x16 0xf 0xe 0x7 0x2 0x8 0x9 , 0xd 0x9 0xa 0x1 0x12 0x12 0xd 0x12 , mid :0x29 0x29 0x2c 0x28 0x19 0x1f 0x21 0x1d ,0x24 0x25 0x1b 0x1b 0x26 0x27 0x2a 0x26 , 0x2d 0x2a 0x26 0x25 0x1c 0x1a 0x1b 0x1e ,0x23 0x1e 0x1a 0x14 0x23 0x26 0x23 0x26 , max :0x41 0x44 0x46 0x41 0x31 0x3a 0x3a 0x36 ,0x3d 0x3f 0x32 0x35 0x3f 0x3f 0x41 0x3f , 0x41 0x3f 0x3e 0x3d 0x32 0x32 0x2e 0x34 ,0x3a 0x33 0x2b 0x28 0x35 0x3a 0x39 0x3b , range:0x2f 0x36 0x33 0x32 0x2f 0x35 0x31 0x31 ,0x31 0x34 0x2d 0x33 0x31 0x30 0x2d 0x31 , 0x28 0x29 0x2f 0x2f 0x2b 0x30 0x26 0x2b ,0x2d 0x2a 0x21 0x27 0x23 0x28 0x2c 0x29 , the write training result: DQS0:0x25, DQS1:0xe, DQS2:0x18, DQS3:0x0, min :0x72 0x74 0x76 0x72 0x60 0x65 0x6b 0x6b 0x6d ,0x52 0x51 0x4c 0x4e 0x56 0x58 0x5a 0x56 0x55 , 0x5f 0x5e 0x58 0x5a 0x51 0x4f 0x51 0x56 0x5a ,0x47 0x45 0x42 0x3d 0x4a 0x4b 0x48 0x4d 0x47 , mid :0x8d 0x8f 0x90 0x8d 0x79 0x7e 0x84 0x82 0x84 ,0x6e 0x6c 0x65 0x66 0x70 0x70 0x72 0x6f 0x6e , 0x7b 0x78 0x72 0x73 0x6b 0x67 0x69 0x6f 0x72 ,0x61 0x5e 0x5b 0x57 0x63 0x66 0x5f 0x68 0x5f , max :0xa9 0xaa 0xaa 0xa8 0x93 0x97 0x9e 0x99 0x9b ,0x8a 0x87 0x7f 0x7f 0x8a 0x88 0x8a 0x89 0x88 , 0x98 0x93 0x8c 0x8d 0x86 0x80 0x81 0x88 0x8a ,0x7c 0x77 0x74 0x71 0x7d 0x82 0x77 0x83 0x77 , range:0x37 0x36 0x34 0x36 0x33 0x32 0x33 0x2e 0x2e ,0x38 0x36 0x33 0x31 0x34 0x30 0x30 0x33 0x33 , 0x39 0x35 0x34 0x33 0x35 0x31 0x30 0x32 0x30 ,0x35 0x32 0x32 0x34 0x33 0x37 0x2f 0x36 0x30 , cs 1: the read training result: DQS0:0x2f, DQS1:0x30, DQS2:0x3b, DQS3:0x32, min :0x10 0xe 0x12 0xe 0x2 0x3 0x9 0x2 , 0xc 0x9 0x7 0x1 0xf 0xe 0x14 0xe , 0x17 0x14 0xd 0xc 0x3 0x1 0x5 0xa , 0xc 0x9 0xb 0x1 0x12 0xf 0xc 0x12 , mid :0x25 0x26 0x29 0x24 0x16 0x1a 0x1e 0x18 ,0x20 0x20 0x18 0x16 0x23 0x22 0x26 0x21 , 0x2e 0x2b 0x27 0x25 0x1c 0x1b 0x1c 0x20 ,0x26 0x22 0x20 0x18 0x27 0x27 0x26 0x29 , max :0x3b 0x3e 0x41 0x3a 0x2a 0x32 0x33 0x2f ,0x35 0x37 0x2a 0x2c 0x37 0x37 0x39 0x35 , 0x46 0x42 0x41 0x3f 0x36 0x36 0x33 0x37 ,0x41 0x3c 0x35 0x2f 0x3d 0x40 0x41 0x41 , range:0x2b 0x30 0x2f 0x2c 0x28 0x2f 0x2a 0x2d ,0x29 0x2e 0x23 0x2b 0x28 0x29 0x25 0x27 , 0x2f 0x2e 0x34 0x33 0x33 0x35 0x2e 0x2d ,0x35 0x33 0x2a 0x2e 0x2b 0x31 0x35 0x2f , the write training result: DQS0:0x25, DQS1:0xe, DQS2:0x18, DQS3:0x0, min :0x70 0x72 0x75 0x71 0x5f 0x63 0x6a 0x6a 0x6a ,0x50 0x4f 0x4a 0x4c 0x53 0x56 0x58 0x54 0x53 , 0x63 0x62 0x5e 0x5f 0x56 0x55 0x56 0x5a 0x60 ,0x4d 0x4a 0x47 0x45 0x4f 0x51 0x4d 0x53 0x4b , mid :0x8c 0x8e 0x8f 0x8c 0x79 0x7d 0x83 0x81 0x82 ,0x6c 0x6b 0x64 0x65 0x6e 0x6f 0x70 0x6e 0x6d , 0x80 0x7e 0x78 0x79 0x70 0x6d 0x6e 0x72 0x76 ,0x68 0x63 0x60 0x5d 0x68 0x6c 0x64 0x6d 0x64 , max :0xa8 0xaa 0xaa 0xa8 0x93 0x98 0x9d 0x99 0x9b ,0x89 0x87 0x7f 0x7f 0x8a 0x88 0x89 0x88 0x88 , 0x9e 0x9a 0x93 0x93 0x8b 0x86 0x87 0x8b 0x8d ,0x84 0x7d 0x7a 0x76 0x82 0x88 0x7b 0x88 0x7d , range:0x38 0x38 0x35 0x37 0x34 0x35 0x33 0x2f 0x31 ,0x39 0x38 0x35 0x33 0x37 0x32 0x31 0x34 0x35 , 0x3b 0x38 0x35 0x34 0x35 0x31 0x31 0x31 0x2d ,0x37 0x33 0x33 0x31 0x33 0x37 0x2e 0x35 0x32 , CA Training result: cs:0 min :0x43 0x43 0x38 0x36 0x38 0x32 0x40 ,0x40 0x37 0x33 0x2f 0x34 0x2f 0x3f , cs:0 mid :0x81 0x83 0x76 0x76 0x75 0x72 0x70 ,0x7d 0x79 0x70 0x6e 0x72 0x6e 0x6d , cs:0 max :0xbf 0xc3 0xb5 0xb6 0xb2 0xb3 0xa1 ,0xbb 0xbb 0xad 0xad 0xb0 0xad 0x9b , cs:0 range:0x7c 0x80 0x7d 0x80 0x7a 0x81 0x61 ,0x7b 0x84 0x7a 0x7e 0x7c 0x7e 0x5c , cs:1 min :0x42 0x47 0x37 0x39 0x38 0x36 0x40 ,0x40 0x3e 0x34 0x35 0x34 0x35 0x40 , cs:1 mid :0x83 0x84 0x77 0x76 0x76 0x73 0x70 ,0x7e 0x7b 0x72 0x70 0x74 0x70 0x6e , cs:1 max :0xc4 0xc2 0xb7 0xb3 0xb5 0xb1 0xa1 ,0xbd 0xb9 0xb1 0xac 0xb4 0xab 0x9c , cs:1 range:0x82 0x7b 0x80 0x7a 0x7d 0x7b 0x61 ,0x7d 0x7b 0x7d 0x77 0x80 0x76 0x5c , out rockchip_sdram_size fdc20208 10000af1 rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0 SDRAM base=0, size=100000000 U-Boot SPL 2022.04-armbian (Apr 20 2022 - 14:38:50 +0300) saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss. Error: -38Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC2 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl NOTICE: BL31: Built : 10:51:13, Jul 15 2021 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2022.04-armbian (Apr 20 2022 - 14:38:50 +0300) Model: Pine64 RK3566 Quartz64-A Board DRAM: rockchip_sdram_size fdc20208 10000af1 rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0 SDRAM base=0, size=100000000 3.7 GiB PMIC: RK8170 (on=0x02, off=0x00) Core: 258 devices, 19 uclasses, devicetree: separate MMC: mmc@fe2b0000: 1, mmc@fe310000: 0 Loading Environment from nowhere... OK In: serial@fe660000 Out: serial@fe660000 Err: serial@fe660000 Model: Pine64 RK3566 Quartz64-A Board Net: No ethernet found. Hit any key to stop autoboot: 0 starting USB... Bus usb@fd800000: USB EHCI 1.00 Bus usb@fd840000: USB OHCI 1.0 Bus usb@fd880000: USB EHCI 1.00 Bus usb@fd8c0000: USB OHCI 1.0 scanning bus usb@fd800000 for devices... 1 USB Device(s) found scanning bus usb@fd840000 for devices... ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) unable to get device descriptor (error=-1) 1 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 1: LibreELEC Retrieving file: /KERNEL append: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyS2,1500000 console=tty0 systemd.debug_shell=ttyS2 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /dtb/rockchip/rk3566-quartz64-a.dtb Moving Image from 0x2080000 to 0x2200000, end=7590000 ## Flattened Device Tree blob at 0a100000 Booting using the fdt blob at 0xa100000 Loading Device Tree to 00000000edec6000, end 00000000edee5cde ... OK Starting kernel ... [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 1.906846] rockchip-usb2phy fe8a0000.usb2phy: failed to create phy [ 1.946907] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 2.236890] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.283932] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.402569] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active. [ 2.412424] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active. [ 3.813844] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [?25hLibreELEC:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 5.18.0-rc6 (user@user-VirtualBox) (aarch64-libreelec-linux-gnueabi-gcc-11.3.0 (GCC) 11.3.0, GNU ld (GNU Binutils) 2.37) #2 SMP PREEMPT Thu May 12 13:25:17 MSK 2022 [ 0.000000] Machine model: Pine64 RK3566 Quartz64-A Board [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 384 MiB at 0x00000000d2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80296 r8192 d30296 u118784 [ 0.000000] pcpu-alloc: s80296 r8192 d30296 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176 [ 0.000000] Kernel command line: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyS2,1500000 console=tty0 systemd.debug_shell=ttyS2 coherent_pool=2M cec.debounce_ms=5000 [ 0.000000] Unknown kernel command line parameters "boot=LABEL=LIBREELEC disk=LABEL=STORAGE", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3374864K/3930112K available (16960K kernel code, 3424K rwdata, 7012K rodata, 57088K init, 876K bss, 162032K reserved, 393216K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x180 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @4e0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @4f0000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 0.000000] GICv3: using LPI property table @0x0000000000500000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000510000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001798] Console: colour dummy device 80x25 [ 0.001864] printk: console [tty0] enabled [ 0.001918] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001938] pid_max: default: 32768 minimum: 301 [ 0.002113] LSM: Security Framework initializing [ 0.002283] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002319] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004742] cblist_init_generic: Setting adjustable number of callback queues. [ 0.004761] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.004917] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005070] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005427] rcu: Hierarchical SRCU implementation. [ 0.006418] Platform MSI: interrupt-controller@fd440000 domain created [ 0.006923] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 0.009450] EFI services will not be available. [ 0.010136] smp: Bringing up secondary CPUs ... [ 0.011126] Detected VIPT I-cache on CPU1 [ 0.011179] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.011202] GICv3: CPU1: using allocated LPI pending table @0x0000000000520000 [ 0.011269] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.012347] Detected VIPT I-cache on CPU2 [ 0.012393] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.012414] GICv3: CPU2: using allocated LPI pending table @0x0000000000530000 [ 0.012465] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.013509] Detected VIPT I-cache on CPU3 [ 0.013550] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.013570] GICv3: CPU3: using allocated LPI pending table @0x0000000000540000 [ 0.013620] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.013788] smp: Brought up 1 node, 4 CPUs [ 0.013811] SMP: Total of 4 processors activated. [ 0.013819] CPU features: detected: 32-bit EL0 Support [ 0.013824] CPU features: detected: 32-bit EL1 Support [ 0.013832] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.013838] CPU features: detected: Common not Private translations [ 0.013844] CPU features: detected: CRC32 instructions [ 0.013852] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.013857] CPU features: detected: LSE atomic instructions [ 0.013862] CPU features: detected: Privileged Access Never [ 0.013867] CPU features: detected: RAS Extension Support [ 0.013874] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.037325] CPU: All CPU(s) started at EL2 [ 0.040506] devtmpfs: initialized [ 0.064735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.064774] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.076352] pinctrl core: initialized pinctrl subsystem [ 0.077387] DMI not present or invalid. [ 0.077985] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.080688] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.081314] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.082372] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.082539] audit: initializing netlink subsys (disabled) [ 0.082832] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 [ 0.084096] thermal_sys: Registered thermal governor 'fair_share' [ 0.084107] thermal_sys: Registered thermal governor 'bang_bang' [ 0.084114] thermal_sys: Registered thermal governor 'step_wise' [ 0.084120] thermal_sys: Registered thermal governor 'user_space' [ 0.084126] thermal_sys: Registered thermal governor 'power_allocator' [ 0.085007] cpuidle: using governor ladder [ 0.085053] cpuidle: using governor menu [ 0.085402] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.085618] ASID allocator initialised with 65536 entries [ 0.087611] Serial: AMBA PL011 UART driver [ 0.107590] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop [ 0.153677] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.154711] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.155682] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.156559] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.157523] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.161967] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi [ 0.195650] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.195673] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.195682] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.195691] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.196873] cryptd: max_cpu_qlen set to 1000 [ 0.199133] ACPI: Interpreter disabled. [ 0.204589] iommu: Default domain type: Translated [ 0.204609] iommu: DMA domain TLB invalidation policy: strict mode [ 0.205241] SCSI subsystem initialized [ 0.205491] libata version 3.00 loaded. [ 0.205903] usbcore: registered new interface driver usbfs [ 0.205976] usbcore: registered new interface driver hub [ 0.206042] usbcore: registered new device driver usb [ 0.207001] pps_core: LinuxPPS API ver. 1 registered [ 0.207011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.207038] PTP clock support registered [ 0.207448] EDAC MC: Ver: 3.0.0 [ 0.208551] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16 [ 0.208747] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.208833] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.210086] FPGA manager framework [ 0.211082] NetLabel: Initializing [ 0.211091] NetLabel: domain hash size = 128 [ 0.211098] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.211182] NetLabel: unlabeled traffic allowed by default [ 0.211392] vgaarb: loaded [ 0.212011] clocksource: Switched to clocksource arch_sys_counter [ 0.298320] VFS: Disk quotas dquot_6.6.0 [ 0.298413] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.298540] FS-Cache: Loaded [ 0.298844] pnp: PnP ACPI: disabled [ 0.312094] NET: Registered PF_INET protocol family [ 0.312415] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.315130] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.315277] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.315547] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.316001] TCP: Hash tables configured (established 32768 bind 32768) [ 0.316178] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.316272] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.316598] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.317299] RPC: Registered named UNIX socket transport module. [ 0.317311] RPC: Registered udp transport module. [ 0.317318] RPC: Registered tcp transport module. [ 0.317323] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.317335] NET: Registered PF_XDP protocol family [ 0.317353] PCI: CLS 0 bytes, default 64 [ 0.342412] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.343640] kvm [1]: IPA Size Limit: 40 bits [ 0.343720] kvm [1]: GICv3: no GICV resource entry [ 0.343732] kvm [1]: disabling GICv2 emulation [ 0.343765] kvm [1]: GIC system register CPU interface enabled [ 0.344061] kvm [1]: vgic interrupt IRQ9 [ 0.344390] kvm [1]: VHE mode initialized successfully [ 0.347977] Initialise system trusted keyrings [ 0.348046] Key type blacklist registered [ 0.348499] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.359278] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.361062] NFS: Registering the id_resolver key type [ 0.361115] Key type id_resolver registered [ 0.361124] Key type id_legacy registered [ 0.361254] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.361267] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.363003] Key type cifs.idmap registered [ 0.418564] xor: measuring software checksum speed [ 0.424394] 8regs : 1713 MB/sec [ 0.430662] 32regs : 1575 MB/sec [ 0.437233] arm64_neon : 1510 MB/sec [ 0.437253] xor: using function: 8regs (1713 MB/sec) [ 0.437273] Key type asymmetric registered [ 0.437281] Asymmetric key parser 'x509' registered [ 1.899290] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.899431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.899641] io scheduler mq-deadline registered [ 1.899653] io scheduler kyber registered [ 1.899860] io scheduler bfq registered [ 1.906846] rockchip-usb2phy fe8a0000.usb2phy: failed to create phy [ 1.925384] EINJ: ACPI disabled. [ 1.939090] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.939116] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.942191] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.942209] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.946907] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 1.952687] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.956338] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 25, base_baud = 1500000) is a 16550A [ 1.958188] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 50, base_baud = 1500000) is a 16550A [ 1.958406] serial serial0: tty port ttyS1 registered [ 1.959666] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 51, base_baud = 1500000) is a 16550A [ 1.961545] printk: console [ttyS2] enabled [ 1.963303] Serial: AMBA driver [ 1.966512] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.979305] brd: module loaded [ 1.988201] loop: module loaded [ 1.990641] megasas: 07.719.03.00-rc1 [ 2.000809] tun: Universal TUN/TAP device driver, 1.6 [ 2.001969] thunder_xcv, ver 1.0 [ 2.002100] thunder_bgx, ver 1.0 [ 2.002176] nicpf, ver 1.0 [ 2.003584] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.003596] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.003731] hclge is initializing [ 2.003764] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.003772] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.003838] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.003846] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.004212] sky2: driver version 1.30 [ 2.006440] VFIO - User Level meta-driver version: 0.3 [ 2.009543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.009580] ehci-pci: EHCI PCI platform driver [ 2.009644] ehci-platform: EHCI generic platform driver [ 2.012081] ehci-platform fd800000.usb: EHCI Host Controller [ 2.012119] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 2.012296] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 2.042039] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.042397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.042415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.042428] usb usb1: Product: EHCI Host Controller [ 2.042436] usb usb1: Manufacturer: Linux 5.18.0-rc6 ehci_hcd [ 2.042445] usb usb1: SerialNumber: fd800000.usb [ 2.043173] hub 1-0:1.0: USB hub found [ 2.043233] hub 1-0:1.0: 1 port detected [ 2.046187] ehci-platform fd880000.usb: EHCI Host Controller [ 2.046221] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [ 2.046393] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000 [ 2.072070] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 2.072429] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.072448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.072459] usb usb2: Product: EHCI Host Controller [ 2.072469] usb usb2: Manufacturer: Linux 5.18.0-rc6 ehci_hcd [ 2.072478] usb usb2: SerialNumber: fd880000.usb [ 2.073126] hub 2-0:1.0: USB hub found [ 2.073182] hub 2-0:1.0: 1 port detected [ 2.074162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.074195] ohci-pci: OHCI PCI platform driver [ 2.074361] ohci-platform: OHCI generic platform driver [ 2.074818] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.074850] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [ 2.075010] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 2.146333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.146352] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.146364] usb usb3: Product: Generic Platform OHCI controller [ 2.146374] usb usb3: Manufacturer: Linux 5.18.0-rc6 ohci_hcd [ 2.146382] usb usb3: SerialNumber: fd840000.usb [ 2.147052] hub 3-0:1.0: USB hub found [ 2.147111] hub 3-0:1.0: 1 port detected [ 2.147949] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 2.147978] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.148151] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000 [ 2.216402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.216421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.216432] usb usb4: Product: Generic Platform OHCI controller [ 2.216442] usb usb4: Manufacturer: Linux 5.18.0-rc6 ohci_hcd [ 2.216451] usb usb4: SerialNumber: fd8c0000.usb [ 2.217112] hub 4-0:1.0: USB hub found [ 2.217170] hub 4-0:1.0: 1 port detected [ 2.219174] usbcore: registered new interface driver usb-storage [ 2.223044] mousedev: PS/2 mouse device common for all mice [ 2.225205] i2c_dev: i2c /dev entries driver [ 2.227722] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected! [ 2.236890] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.238541] rk808 0-0020: chip id: 0x8170 [ 2.272495] random: fast init done [ 2.283932] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.284937] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.284973] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.284986] rk808-regulator rk808-regulator: max buck steps per change: 8 [ 2.354954] boost: Bringing 4700000uV into 5000000-5000000uV [ 2.369777] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0 [ 2.382268] rk808-rtc rk808-rtc: registered as rtc0 [ 2.385013] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:01:02 UTC (1501923662) [ 2.402569] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active. [ 2.405811] sdhci: Secure Digital Host Controller Interface driver [ 2.405819] sdhci: Copyright(c) Pierre Ossman [ 2.406112] Synopsys Designware Multimedia Card Interface Driver [ 2.407088] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.407918] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 2.407947] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 2.407955] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 2.408006] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo [ 2.409027] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 2.409042] mmc_host mmc2: card is non-removable. [ 2.409184] ledtrig-cpu: registered to indicate activity on CPUs [ 2.409878] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.410136] hid: raw HID events driver (C) Jiri Kosina [ 2.410256] usbcore: registered new interface driver usbhid [ 2.410260] usbhid: USB HID core driver [ 2.412424] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active. [ 2.415302] NET: Registered PF_INET6 protocol family [ 2.420654] Segment Routing with IPv6 [ 2.420696] In-situ OAM (IOAM) with IPv6 [ 2.420757] NET: Registered PF_PACKET protocol family [ 2.420882] 8021q: 802.1Q VLAN Support v1.8 [ 2.420931] Key type dns_resolver registered [ 2.421518] registered taskstats version 1 [ 2.421530] Loading compiled-in X.509 certificates [ 2.472259] reg-fixed-voltage vcc5v0_usb20_otg: nonexclusive access to GPIO for vcc5v0_usb20_otg [ 2.478037] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 2.478075] rockchip-dw-pcie 3c0000000.pcie: IO 0x0301000000..0x03010fffff -> 0x0001000000 [ 2.478090] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0302000000..0x033fffffff -> 0x0002000000 [ 2.478178] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled [ 2.478183] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 2.542231] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.662907] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 2.782096] usb 4-1: new full-speed USB device number 2 using ohci-platform [ 3.059173] usb 4-1: New USB device found, idVendor=1d57, idProduct=ad03, bcdDevice= 2.00 [ 3.059217] usb 4-1: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.059241] usb 4-1: Manufacturer: FREEWAY TECHNOLOGY [ 3.071164] input: FREEWAY TECHNOLOGY Keyboard as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.2/0003:1D57:AD03.0001/input/input1 [ 3.133931] input: FREEWAY TECHNOLOGY as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.2/0003:1D57:AD03.0001/input/input2 [ 3.135189] hid-generic 0003:1D57:AD03.0001: input,hiddev0,hidraw0: USB HID v1.01 Keyboard [FREEWAY TECHNOLOGY] on usb-fd8c0000.usb-1/input2 [ 3.141940] input: FREEWAY TECHNOLOGY as /devices/platform/fd8c0000.usb/usb4/4-1/4-1:1.3/0003:1D57:AD03.0002/input/input4 [ 3.143194] hid-generic 0003:1D57:AD03.0002: input,hidraw1: USB HID v1.01 Mouse [FREEWAY TECHNOLOGY] on usb-fd8c0000.usb-1/input3 [ 3.592816] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up [ 3.593271] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 3.593306] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.593340] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x1000000-0x10fffff]) [ 3.593366] pci_bus 0000:00: root bus resource [mem 0x302000000-0x33fffffff] (bus address [0x02000000-0x3fffffff]) [ 3.593474] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 [ 3.593564] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.593793] pci 0000:00:00.0: supports D1 D2 [ 3.593815] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.607034] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 3.615018] pci 0000:00:00.0: BAR 6: assigned [mem 0x302000000-0x30200ffff pref] [ 3.615053] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.618924] pcieport 0000:00:00.0: PME: Signaling with IRQ 90 [ 3.619520] pcieport 0000:00:00.0: AER: enabled with IRQ 99 [ 3.632201] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 3.632966] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 3.632974] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30). [ 3.632980] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10). [ 3.632989] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 3.633027] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 3.638038] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 3.638263] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 3.638272] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 3.638279] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 3.638283] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 3.638287] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 3.638290] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 3.638333] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 3.638338] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.638345] rk_gmac-dwmac fe010000.ethernet: device MAC address 42:20:1b:01:98:bb [ 3.638352] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 3.638358] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 3.638363] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width [ 3.810401] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.810491] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5 [ 3.810785] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.810948] xhci-hcd xhci-hcd.1.auto: irq 18, io mem 0xfcc00000 [ 3.812098] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 3.812136] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.812159] usb usb5: Product: xHCI Host Controller [ 3.812177] usb usb5: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.812194] usb usb5: SerialNumber: xhci-hcd.1.auto [ 3.812701] hub 5-0:1.0: USB hub found [ 3.812742] hub 5-0:1.0: 1 port detected [ 3.813068] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.813083] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6 [ 3.813106] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.813186] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.813332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 3.813344] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.813351] usb usb6: Product: xHCI Host Controller [ 3.813357] usb usb6: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.813363] usb usb6: SerialNumber: xhci-hcd.1.auto [ 3.813806] hub 6-0:1.0: USB hub found [ 3.813844] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 3.818370] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.818399] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 7 [ 3.818542] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.818612] xhci-hcd xhci-hcd.2.auto: irq 19, io mem 0xfd000000 [ 3.818989] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 3.819001] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.819008] usb usb7: Product: xHCI Host Controller [ 3.819014] usb usb7: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.819019] usb usb7: SerialNumber: xhci-hcd.2.auto [ 3.819490] hub 7-0:1.0: USB hub found [ 3.819530] hub 7-0:1.0: 1 port detected [ 3.819850] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.819865] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 8 [ 3.819880] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 3.819959] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.820099] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 3.820111] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.820118] usb usb8: Product: xHCI Host Controller [ 3.820123] usb usb8: Manufacturer: Linux 5.18.0-rc6 xhci-hcd [ 3.820130] usb usb8: SerialNumber: xhci-hcd.2.auto [ 3.820541] hub 8-0:1.0: USB hub found [ 3.820578] hub 8-0:1.0: 1 port detected [ 3.821917] ------------[ cut here ]------------ [ 3.821929] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1654 __queue_delayed_work+0xb0/0xd4 [ 3.821953] Modules linked in: [ 3.821963] CPU: 0 PID: 219 Comm: irq/53-rockchip Not tainted 5.18.0-rc6 #2 [ 3.821971] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.821976] pstate: 004000c9 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.821983] pc : __queue_delayed_work+0xb0/0xd4 [ 3.821991] lr : queue_delayed_work_on+0x54/0x9c [ 3.821999] sp : ffff80000e873c30 [ 3.822002] x29: ffff80000e873c30 x28: 0000000000000000 x27: 0000000000000000 [ 3.822013] x26: ffff800008116650 x25: 0000000000000009 x24: 0000000000000009 [ 3.822024] x23: 0000000000000001 x22: ffff80000915e600 x21: ffff00000119f080 [ 3.822035] x20: ffff00000119f258 x19: 0000000000000000 x18: 0000000000000000 [ 3.822045] x17: ffff8000e2bb5000 x16: ffff800008004000 x15: 0000000000004000 [ 3.822056] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.822066] x11: 000000000000001c x10: 0000000000000a40 x9 : ffff80000e873cc0 [ 3.822076] x8 : ffff000001f4b620 x7 : ffff0000ef76f600 x6 : 0000000000000000 [ 3.822086] x5 : ffff8000080bddd0 x4 : 0000000000000100 x3 : 0000000000000000 [ 3.822096] x2 : ffff00000119f298 x1 : ffff000000406800 x0 : ffff00000119f2b8 [ 3.822107] Call trace: [ 3.822109] __queue_delayed_work+0xb0/0xd4 [ 3.822118] queue_delayed_work_on+0x54/0x9c [ 3.822125] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.822134] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.822141] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.822148] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.822154] irq_thread_fn+0x2c/0x9c [ 3.822162] irq_thread+0x174/0x220 [ 3.822169] kthread+0xf4/0x100 [ 3.822176] ret_from_fork+0x10/0x20 [ 3.822184] ---[ end trace 0000000000000000 ]--- [ 3.822193] ------------[ cut here ]------------ [ 3.822196] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1656 __queue_delayed_work+0x8c/0xd4 [ 3.822207] Modules linked in: [ 3.822212] CPU: 0 PID: 219 Comm: irq/53-rockchip Tainted: G W 5.18.0-rc6 #2 [ 3.822218] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.822222] pstate: 004000c9 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.822228] pc : __queue_delayed_work+0x8c/0xd4 [ 3.822236] lr : queue_delayed_work_on+0x54/0x9c [ 3.822242] sp : ffff80000e873c30 [ 3.822246] x29: ffff80000e873c30 x28: 0000000000000000 x27: 0000000000000000 [ 3.822256] x26: ffff800008116650 x25: 0000000000000009 x24: 0000000000000009 [ 3.822267] x23: 0000000000000001 x22: ffff80000915e600 x21: ffff00000119f080 [ 3.822277] x20: ffff00000119f258 x19: 0000000000000000 x18: 0000000000000000 [ 3.822288] x17: ffff8000e2bb5000 x16: ffff800008004000 x15: 0000000000004000 [ 3.822298] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.822308] x11: 000000000000001c x10: 0000000000000a40 x9 : ffff80000e873cc0 [ 3.822319] x8 : ffff000001f4b620 x7 : ffff0000ef76f600 x6 : 0000000000000000 [ 3.822329] x5 : ffff00000119f2a0 x4 : 0000000000000100 x3 : 0000000000000000 [ 3.822339] x2 : ffff00000119f298 x1 : ffff000000406800 x0 : ffff00000119f2b8 [ 3.822349] Call trace: [ 3.822352] __queue_delayed_work+0x8c/0xd4 [ 3.822360] queue_delayed_work_on+0x54/0x9c [ 3.822367] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.822376] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.822382] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.822389] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.822396] irq_thread_fn+0x2c/0x9c [ 3.822403] irq_thread+0x174/0x220 [ 3.822409] kthread+0xf4/0x100 [ 3.822415] ret_from_fork+0x10/0x20 [ 3.822422] ---[ end trace 0000000000000000 ]--- [ 3.822433] ------------[ cut here ]------------ [ 3.822435] WARNING: CPU: 0 PID: 219 at kernel/workqueue.c:1499 __queue_work+0x4bc/0x5a0 [ 3.822447] Modules linked in: [ 3.822451] CPU: 0 PID: 219 Comm: irq/53-rockchip Tainted: G W 5.18.0-rc6 #2 [ 3.822457] Hardware name: Pine64 RK3566 Quartz64-A Board (DT) [ 3.822461] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.822467] pc : __queue_work+0x4bc/0x5a0 [ 3.822474] lr : __queue_work+0x1f4/0x5a0 [ 3.822480] sp : ffff80000e873bc0 [ 3.822483] x29: ffff80000e873bc0 x28: ffff0000ef76f000 x27: ffff80000cba8008 [ 3.822494] x26: ffff80000cf5a208 x25: 0000000000000100 x24: ffff80000cba8008 [ 3.822504] x23: ffff00000119f2a0 x22: 000000000000001f x21: ffff000000406800 [ 3.822515] x20: ffff0000ef772f00 x19: ffff00000119f298 x18: 0000000000000000 [ 3.822525] x17: ffff8000e2bb5000 x16: ffff800008004000 x15: 0000000000004000 [ 3.822536] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 3.822546] x11: 0000000000000040 x10: ffff80000cf778f8 x9 : ffff80000cf778f0 [ 3.822557] x8 : ffff000000800028 x7 : 0000000000000000 x6 : 0000000000000001 [ 3.822567] x5 : ffff80000e874000 x4 : ffff80000e873b30 x3 : 0000000000000000 [ 3.822577] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000000 [ 3.822587] Call trace: [ 3.822589] __queue_work+0x4bc/0x5a0 [ 3.822596] __queue_delayed_work+0x80/0xd4 [ 3.822603] queue_delayed_work_on+0x54/0x9c [ 3.822610] rockchip_usb2phy_otg_sm_work+0x3b0/0x44c [ 3.822617] rockchip_usb2phy_bvalid_irq+0xe8/0x140 [ 3.822623] rockchip_usb2phy_otg_mux_irq+0x34/0x190 [ 3.822629] rockchip_usb2phy_irq+0xb0/0xc0 [ 3.822636] irq_thread_fn+0x2c/0x9c [ 3.822643] irq_thread+0x174/0x220 [ 3.822649] kthread+0xf4/0x100 [ 3.822655] ret_from_fork+0x10/0x20 [ 3.822661] ---[ end trace 0000000000000000 ]--- [ 3.823055] printk: console [netcon0] enabled [ 3.823068] netconsole: network logging started [ 3.823302] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 3.823343] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 3.823354] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 3.823425] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo [ 3.823516] psci_checker: PSCI checker started using 4 CPUs [ 3.823523] psci_checker: Starting hotplug tests [ 3.823530] psci_checker: Trying to turn off and on again all CPUs [ 3.824448] psci: CPU0 killed (polled 0 ms) [ 3.824839] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 3.828565] psci: CPU1 killed (polled 0 ms) [ 3.832893] psci: CPU2 killed (polled 0 ms) [ 3.835054] Detected VIPT I-cache on CPU0 [ 3.835109] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 3.835206] CPU0: Booted secondary processor 0x0000000000 [0x412fd050] [ 3.837674] Detected VIPT I-cache on CPU1 [ 3.837702] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 3.837756] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 3.838726] Detected VIPT I-cache on CPU2 [ 3.838755] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 3.838806] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 3.841309] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.842095] psci_checker: Trying to turn off and on again group 0 (CPUs 0-3) [ 3.842628] psci: CPU0 killed (polled 0 ms) [ 3.845977] psci: CPU1 killed (polled 0 ms) [ 3.848294] psci: CPU2 killed (polled 0 ms) [ 3.849759] Detected VIPT I-cache on CPU0 [ 3.849815] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 3.849911] CPU0: Booted secondary processor 0x0000000000 [0x412fd050] [ 3.851292] Detected VIPT I-cache on CPU1 [ 3.851339] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 3.851420] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 3.854999] Detected VIPT I-cache on CPU2 [ 3.855036] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 3.855100] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 3.858245] psci_checker: Hotplug tests passed OK [ 3.858252] psci_checker: Starting suspend tests (10 cycles per state) [ 3.858419] psci_checker: cpuidle not available on CPU 0, ignoring [ 3.858425] psci_checker: cpuidle not available on CPU 1, ignoring [ 3.858428] psci_checker: cpuidle not available on CPU 2, ignoring [ 3.858431] psci_checker: cpuidle not available on CPU 3, ignoring [ 3.858435] psci_checker: Could not start suspend tests on any CPU [ 3.858437] psci_checker: PSCI checker completed [ 3.879188] Freeing unused kernel memory: 57088K [ 3.903842] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 3.921697] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 302 [ 3.921762] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 [ 3.924312] mmcblk0: mmc0:59b4 EC1S5 59.7 GiB [ 3.927296] mmcblk0: p1 p2 [ 3.942091] Run /init as init process [ 3.942098] with arguments: [ 3.942102] /init [ 3.942106] with environment: [ 3.942108] HOME=/ [ 3.942110] TERM=linux [ 3.942113] boot=LABEL=LIBREELEC [ 3.942115] disk=LABEL=STORAGE [ 3.972127] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 266 [ 3.974057] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 4.024115] rockchip-vop2 fe040000.vop: Adding to iommu group 1 [ 4.030258] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops [rockchipdrm]) [ 4.034529] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 4.035020] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 4.035510] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) [ 4.035937] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 4.339223] Console: switching to colour frame buffer device 170x48 [ 4.388342] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 4.437213] Checking disk(s): LABEL=LIBREELEC LABEL=STORAGE [ 4.638829] fsck: fsck.fat 4.2 (2021-01-31) [ 4.639003] fsck: /dev/mmcblk0p1: 80 files, 33158/65501 clusters [ 4.639186] fsck: STORAGE: clean, 11/15511552 files, 3906172/62046208 blocks [ 4.748643] loop0: detected capacity change from 0 to 340808 [ 4.924301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 5.175130] kernel-overlays-setup: setup base modules [ 5.600522] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.18.0-rc6 [ 5.677733] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 5.677981] kernel-overlays-setup: done [ 6.059086] systemd[1]: System time before build time, advancing clock. [ 6.131939] systemd[1]: systemd 250.5 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 6.132685] systemd[1]: Detected architecture arm64. [ 6.132810] systemd[1]: Detected first boot. [ 6.212740] systemd[1]: Cannot open /etc/machine-id: No such file or directory [ 6.630861] systemd[1]: Populated /etc with preset unit settings. [ 6.743028] systemd[1]: Queued start job for default target Kodi Mediacenter Interface. [ 6.776567] systemd[1]: Created slice Slice /system/modprobe. [ 6.777871] systemd[1]: Created slice User and Session Slice. [ 6.778127] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.778308] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.778434] systemd[1]: Reached target Path Units. [ 6.778501] systemd[1]: Reached target Slice Units. [ 6.791221] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.791355] systemd[1]: Reached target RPC Port Mapper. [ 6.791650] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.792269] systemd[1]: Listening on Journal Audit Socket. [ 6.792654] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.793069] systemd[1]: Listening on Journal Socket. [ 6.794754] systemd[1]: Listening on udev Control Socket. [ 6.795154] systemd[1]: Listening on udev Kernel Socket. [ 6.798120] systemd[1]: Mounting Huge Pages File System... [ 6.801332] systemd[1]: Mounting POSIX Message Queue File System... [ 6.805701] systemd[1]: Mounting Kernel Debug File System... [ 6.809875] systemd[1]: Mounting Kernel Trace File System... [ 6.814866] systemd[1]: Mounting Variable Directory... [ 6.819414] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 6.820061] systemd[1]: Started Early root shell on /dev/ttyS2 FOR DEBUGGING ONLY. [ 6.824893] systemd[1]: Starting Create List of Static Device Nodes... [ 6.828914] systemd[1]: Starting Load Kernel Module configfs... [ 6.833068] systemd[1]: Starting Load Kernel Module drm... [ 6.837012] systemd[1]: Starting Load Kernel Module fuse... [ 6.841111] systemd[1]: Starting Show Version... [ 6.845135] systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs... [ 6.849154] systemd[1]: Starting Mounting swapfile... [ 6.856722] fuse: init (API version 7.36) [ 6.859185] systemd[1]: Starting Rebuild Hardware Database... [ 6.871837] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. [ 6.877528] systemd[1]: Starting Apply Kernel Variables... [ 6.882100] systemd[1]: Starting Setup NTP servers for timesyncd... [ 6.886942] systemd[1]: Starting Coldplug All udev Devices... [ 6.890866] systemd[1]: Starting Wait for Kernel Time Synchronisation... [ 6.901164] systemd[1]: Mounted Huge Pages File System. [ 6.902106] systemd[1]: Mounted POSIX Message Queue File System. [ 6.902687] systemd[1]: Mounted Kernel Debug File System. [ 6.903387] systemd[1]: Mounted Kernel Trace File System. [ 6.904340] systemd[1]: Mounted Variable Directory. [ 6.906267] systemd[1]: Finished Create List of Static Device Nodes. [ 6.907505] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.908895] systemd[1]: Finished Load Kernel Module configfs. [ 6.910408] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.911484] systemd[1]: Finished Load Kernel Module drm. [ 6.912802] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.913775] systemd[1]: Finished Load Kernel Module fuse. [ 6.915380] systemd[1]: Finished Show Version. [ 6.927638] systemd[1]: Mounting FUSE Control File System... [ 6.932527] systemd[1]: Mounting Kernel Configuration File System... [ 6.938444] systemd[1]: Finished Setup NTP servers for timesyncd. [ 6.944090] systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs. [ 6.944621] systemd[1]: Persistent Log Storage was skipped because all trigger condition checks failed. [ 6.954181] systemd[1]: Finished Mounting swapfile. [ 6.954667] systemd[1]: Mounted FUSE Control File System. [ 6.955040] systemd[1]: Mounted Kernel Configuration File System. [ 6.955242] systemd[1]: Reached target Swaps. [ 6.981137] systemd[1]: Mounting Temporary Directory /tmp... [ 6.989469] systemd[1]: Finished Apply Kernel Variables. [ 6.990002] systemd[1]: Mounted Temporary Directory /tmp. [ 6.990295] systemd[1]: Reached target Local File Systems. [ 6.993809] systemd[1]: Starting Setup machine-id... [ 7.348328] systemd[1]: Finished Coldplug All udev Devices. [ 8.542452] systemd[1]: Finished Rebuild Hardware Database. [ 10.102016] random: crng init done [ 10.110947] systemd[1]: Finished Setup machine-id. [ 10.116011] systemd[1]: Starting Journal Service... [ 10.119615] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.152580] systemd[1]: Finished Create Static Device Nodes in /dev. [ 10.248440] systemd[1]: Started Journal Service. [ 10.264698] systemd-journald[378]: Received client request to flush runtime journal. [ 10.921756] audit: type=1334 audit(1651167749.850:2): prog-id=5 op=LOAD [ 10.921890] audit: type=1334 audit(1651167749.850:3): prog-id=6 op=LOAD [ 10.922394] systemd-journald[378]: Data hash table of /run/log/journal/8169f796631d7e1e6742642f626ad201/system.journal has a fill level at 75.1 (1537 of 2047 items, 524288 file size, 341 bytes per hash table item), suggesting rotation. [ 10.922412] systemd-journald[378]: /run/log/journal/8169f796631d7e1e6742642f626ad201/system.journal: Journal header limits reached or header out-of-date, rotating. [ 11.140338] audit: type=1334 audit(1651167750.070:4): prog-id=7 op=LOAD [ 11.149250] audit: type=1334 audit(1651167750.080:5): prog-id=8 op=LOAD [ 11.646981] pwm-backlight backlight: supply power not found, using dummy regulator [ 11.733600] mc: Linux media interface: v0.10 [ 11.918668] audit: type=1334 audit(1651167750.850:6): prog-id=9 op=LOAD [ 11.919135] audit: type=1334 audit(1651167750.850:7): prog-id=10 op=LOAD [ 11.939468] usbcore: registered new interface driver snd-usb-audio [ 11.939737] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:00] driver [YT8511 Gigabit Ethernet] (irq=POLL) [ 11.982065] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 11.988967] spi-nor spi4.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 11.988989] spi-nor: probe of spi4.0 failed with error -2 [ 12.082329] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 12.082827] dwmac4: Master AXI performs any burst length [ 12.082852] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found [ 12.082883] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 12.091489] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock [ 12.094585] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode [ 12.098596] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.098656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.124336] videodev: Linux video capture interface: v2.00 [ 12.139255] stmmac: wakeup enable [ 12.154463] panfrost fde60000.gpu: clock rate = 594000000 [ 12.154505] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 12.160053] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 12.160075] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400 [ 12.160082] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7 [ 12.160088] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1 [ 12.225215] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.278502] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1 [ 12.317830] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.424567] gpio-fan gpio_fan: GPIO fan initialized [ 12.441141] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 12.443403] hantro-vpu fdea0000.video-codec: Adding to iommu group 0 [ 12.444041] hantro-vpu fdea0000.video-codec: registered rockchip,rk3328-vpu-dec as /dev/video0 [ 12.517846] Bluetooth: Core ver 2.22 [ 12.517869] Bluetooth: Starting self testing [ 12.530191] Bluetooth: ECDH test passed in 12026 usecs [ 12.535005] Bluetooth: SMP test passed in 4578 usecs [ 12.535056] Bluetooth: Finished self testing [ 12.535227] NET: Registered PF_BLUETOOTH protocol family [ 12.535234] Bluetooth: HCI device and connection manager initialized [ 12.535252] Bluetooth: HCI socket layer initialized [ 12.535261] Bluetooth: L2CAP socket layer initialized [ 12.535286] Bluetooth: SCO socket layer initialized [ 12.567533] brcmfmac: F1 signature read @0x18000000=0x15294345 [ 12.592066] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 12.592245] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.pine64,quartz64-a.bin failed with error -2 [ 12.592261] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43456-sdio.pine64,quartz64-a.bin [ 12.595027] usbcore: registered new interface driver brcmfmac [ 12.776772] Bluetooth: HCI UART driver ver 2.3 [ 12.776795] Bluetooth: HCI UART protocol H4 registered [ 12.776799] Bluetooth: HCI UART protocol BCSP registered [ 12.776879] Bluetooth: HCI UART protocol LL registered [ 12.776885] Bluetooth: HCI UART protocol ATH3K registered [ 12.776927] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.777258] Bluetooth: HCI UART protocol Intel registered [ 12.790226] Bluetooth: HCI UART protocol Broadcom registered [ 12.790295] Bluetooth: HCI UART protocol QCA registered [ 12.790300] Bluetooth: HCI UART protocol AG6XX registered [ 12.790351] Bluetooth: HCI UART protocol Marvell registered [ 13.440810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.440832] Bluetooth: BNEP filters: protocol multicast [ 13.440848] Bluetooth: BNEP socket layer initialized [ 15.032106] Bluetooth: hci0: command 0x0c03 tx timeout [ 20.872049] cec-dw_hdmi: message ff 84 10 00 06 timed out LibreELEC:/ #