U-Boot TPL 2020.01-g908d441fef (Jan 14 2020 - 14:01:19)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.01-g908d441fef (Jan 14 2020 - 14:01:19 -0500)
Trying to boot from MMC2


U-Boot 2020.01-g908d441fef (Jan 14 2020 - 14:01:19 -0500)

Model: Pine64 Pinebook Pro
DRAM:  3.9 GiB
PMIC:  RK808 
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: Pine64 Pinebook Pro
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
Card did not respond to voltage select!
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3c0000: USB EHCI 1.00
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
1055 bytes read in 19 ms (53.7 KiB/s)
## Executing script at 00500000
19773952 bytes read in 872 ms (21.6 MiB/s)
81647 bytes read in 34 ms (2.3 MiB/s)
7416908 bytes read in 340 ms (20.8 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
Host not halted after 16000 microseconds.
ERROR: reserving fdt memory region failed (addr=0 size=0)
   Loading Device Tree to 00000000f5f06000, end 00000000f5f1cfff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.5.0-0.2-MANJARO-ARM (root@aarch64) (gcc version 9.2.0 (GCC)) #1 SMP Sat Jan 11 07:05:39 UTC 2020
[    0.000000] Machine model: Pine64 Pinebook Pro
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 64 MiB at 0x00000000f1c00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 34 pages/cpu s101016 r8192 d30056 u139264
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: console=ttyS2,1500000n8 root=/dev/nvme0n1 rw rootwait bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash append video=eDP-1:1920x1080@60 initrd=0x06000000,20M ramdisk_size=10M
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[    0.000000] Memory: 3800516K/4061184K available (12412K kernel code, 814K rwdata, 4856K rodata, 1152K init, 8467K bss, 195132K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from cache_random_seq_create+0x78/0x148 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6c80000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000f6c40000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6c50000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001750] Console: colour dummy device 80x25
[    0.001803] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001820] pid_max: default: 32768 minimum: 301
[    0.002021] LSM: Security Framework initializing
[    0.002044] Yama: becoming mindful.
[    0.002148] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002180] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002254] *** VALIDATE tmpfs ***
[    0.002853] *** VALIDATE proc ***
[    0.003147] *** VALIDATE cgroup1 ***
[    0.003160] *** VALIDATE cgroup2 ***
[    0.004238] ASID allocator initialised with 32768 entries
[    0.004344] rcu: Hierarchical SRCU implementation.
[    0.004638] Platform MSI: interrupt-controller@fee20000 domain created
[    0.005156] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.006115] EFI services will not be available.
[    0.006615] smp: Bringing up secondary CPUs ...
[    0.007173] Detected VIPT I-cache on CPU1
[    0.007213] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.007230] GICv3: CPU1: using allocated LPI pending table @0x00000000f6c60000
[    0.007278] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.007938] Detected VIPT I-cache on CPU2
[    0.007968] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.007982] GICv3: CPU2: using allocated LPI pending table @0x00000000f6c70000
[    0.008012] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.008606] Detected VIPT I-cache on CPU3
[    0.008633] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.008646] GICv3: CPU3: using allocated LPI pending table @0x00000000f6d00000
[    0.008676] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.009275] CPU features: detected: EL2 vector hardening
[    0.009283] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.009289] CPU features: detected: ARM erratum 1319367
[    0.009295] Detected PIPT I-cache on CPU4
[    0.009325] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.009338] GICv3: CPU4: using allocated LPI pending table @0x00000000f6d10000
[    0.009371] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.010077] Detected PIPT I-cache on CPU5
[    0.010101] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.010114] GICv3: CPU5: using allocated LPI pending table @0x00000000f6d20000
[    0.010140] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.010247] smp: Brought up 1 node, 6 CPUs
[    0.010328] SMP: Total of 6 processors activated.
[    0.010338] CPU features: detected: 32-bit EL0 Support
[    0.010348] CPU features: detected: CRC32 instructions
[    0.011292] CPU: All CPU(s) started at EL2
[    0.011334] alternatives: patching kernel code
[    0.014434] devtmpfs: initialized
[    0.026595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026620] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.029775] pinctrl core: initialized pinctrl subsystem
[    0.030878] thermal_sys: Registered thermal governor 'fair_share'
[    0.030883] thermal_sys: Registered thermal governor 'bang_bang'
[    0.030893] thermal_sys: Registered thermal governor 'step_wise'
[    0.030901] thermal_sys: Registered thermal governor 'user_space'
[    0.031478] DMI not present or invalid.
[    0.031863] NET: Registered protocol family 16
[    0.034381] DMA: preallocated 256 KiB pool for atomic allocations
[    0.035663] cpuidle: using governor ladder
[    0.035685] cpuidle: using governor menu
[    0.036006] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.036295] Serial: AMBA PL011 UART driver
[    0.070164] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.070177] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.070186] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.070195] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.084278] cryptd: max_cpu_qlen set to 1000
[    0.114974] ACPI: Interpreter disabled.
[    0.115500] vcc_12v: supplied by vcc_sysin
[    0.115752] vcc3v3_sys: supplied by vcc_sysin
[    0.116115] vcc5v0_usb: supplied by vcc_sysin
[    0.116395] vcc_0v9: supplied by vcc3v3_sys
[    0.116631] vcca1v8_s3: supplied by vcc3v3_sys
[    0.116931] vcc3v0_sd: supplied by vcc3v3_sys
[    0.117274] vcc3v3_panel: supplied by vcc3v3_sys
[    0.230502] vcc3v3_ssd: supplied by vcc3v3_sys
[    0.230842] vcc5v0_otg: supplied by vcc5v0_usb
[    0.231173] vbus_5vout: supplied by vcc5v0_usb
[    0.231787] iommu: Default domain type: Translated 
[    0.233646] vgaarb: loaded
[    0.234374] SCSI subsystem initialized
[    0.234745] usbcore: registered new interface driver usbfs
[    0.234784] usbcore: registered new interface driver hub
[    0.234867] usbcore: registered new device driver usb
[    0.235402] mc: Linux media interface: v0.10
[    0.235429] videodev: Linux video capture interface: v2.00
[    0.235465] pps_core: LinuxPPS API ver. 1 registered
[    0.235472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.235487] PTP clock support registered
[    0.235679] EDAC MC: Ver: 3.0.0
[    0.236324] Advanced Linux Sound Architecture Driver Initialized.
[    0.236736] NetLabel: Initializing
[    0.236745] NetLabel:  domain hash size = 128
[    0.236750] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.236802] NetLabel:  unlabeled traffic allowed by default
[    0.237184] clocksource: Switched to clocksource arch_sys_counter
[    0.237197] *** VALIDATE bpf ***
[    0.237385] VFS: Disk quotas dquot_6.6.0
[    0.237447] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.237515] *** VALIDATE ramfs ***
[    0.237532] *** VALIDATE hugetlbfs ***
[    0.237874] pnp: PnP ACPI: disabled
[    0.243911] NET: Registered protocol family 2
[    0.244510] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.244591] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.244941] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.245607] TCP: Hash tables configured (established 32768 bind 32768)
[    0.245734] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.245869] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.246158] NET: Registered protocol family 1
[    0.246658] RPC: Registered named UNIX socket transport module.
[    0.246666] RPC: Registered udp transport module.
[    0.246673] RPC: Registered tcp transport module.
[    0.246679] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.246692] PCI: CLS 0 bytes, default 64
[    0.246849] Trying to unpack rootfs image as initramfs...
[    0.696396] Initramfs unpacking failed: invalid magic at start of compressed archive
[    0.709681] Freeing initrd memory: 20480K
[    0.710759] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.711122] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.711800] kvm [1]: IPA Size Limit: 40bits
[    0.714016] kvm [1]: vgic-v2@fff20000
[    0.714045] kvm [1]: GIC system register CPU interface enabled
[    0.714247] kvm [1]: vgic interrupt IRQ10
[    0.714472] kvm [1]: Hyp mode initialized successfully
[    1.303752] Initialise system trusted keyrings
[    1.303940] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.309926] zbud: loaded
[    1.312259] NFS: Registering the id_resolver key type
[    1.312291] Key type id_resolver registered
[    1.312299] Key type id_legacy registered
[    1.312316] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.312351] ntfs: driver 2.1.32 [Flags: R/W].
[    1.312726] fuse: init (API version 7.31)
[    1.312815] *** VALIDATE fuse ***
[    1.312831] *** VALIDATE fuse ***
[    1.313168] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    1.314848] *** VALIDATE xfs ***
[    1.347031] NET: Registered protocol family 38
[    1.347056] Key type asymmetric registered
[    1.347065] Asymmetric key parser 'x509' registered
[    1.347134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.347366] io scheduler mq-deadline registered
[    1.347376] io scheduler kyber registered
[    1.347579] io scheduler bfq registered
[    1.358506] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    1.358610] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not found, using dummy regulator
[    1.358678] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not found, using dummy regulator
[    1.471393] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    1.471432] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    1.471461] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    1.471766] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    1.471783] pci_bus 0000:00: root bus resource [bus 00-1f]
[    1.471796] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    1.471812] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    1.471858] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[    1.471989] pci 0000:00:00.0: supports D1
[    1.472001] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.479830] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.480023] pci 0000:01:00.0: [1987:5013] type 00 class 0x010802
[    1.480153] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    1.480314] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
[    1.480819] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[    1.514496] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[    1.514539] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[    1.514559] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
[    1.514608] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.514624] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    1.514834] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    1.515145] pcieport 0000:00:00.0: PME: Signaling with IRQ 226
[    1.515471] pcieport 0000:00:00.0: AER: enabled with IRQ 226
[    1.516780] IPMI message handler: version 39.2
[    1.519492] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.519509] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.521138] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.521155] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.523319] pwm-regulator: supplied by regulator-dummy
[    1.524322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.526590] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.526773] serial serial0: tty port ttyS0 registered
[    1.527417] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.645154] printk: console [ttyS2] enabled
[    1.648122] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.650012] nvme nvme0: pci function 0000:01:00.0
[    1.650496] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    1.653396] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[    1.667237] libphy: Fixed MDIO Bus: probed
[    1.675764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.676341] ehci-pci: EHCI PCI platform driver
[    1.676768] ehci-platform: EHCI generic platform driver
[    1.679454] ehci-platform fe380000.usb: EHCI Host Controller
[    1.680101] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    1.680886] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[    1.707217] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.707889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.708617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.709253] usb usb1: Product: EHCI Host Controller
[    1.709685] usb usb1: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM ehci_hcd
[    1.710275] usb usb1: SerialNumber: fe380000.usb
[    1.711098] hub 1-0:1.0: USB hub found
[    1.711456] hub 1-0:1.0: 1 port detected
[    1.714238] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.714886] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    1.715653] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
[    1.737212] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.737867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.738594] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.739229] usb usb2: Product: EHCI Host Controller
[    1.739662] usb usb2: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM ehci_hcd
[    1.740252] usb usb2: SerialNumber: fe3c0000.usb
[    1.741032] hub 2-0:1.0: USB hub found
[    1.741393] hub 2-0:1.0: 1 port detected
[    1.742268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.742822] ohci-pci: OHCI PCI platform driver
[    1.743262] ohci-platform: OHCI generic platform driver
[    1.743900] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.744653] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    1.745421] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[    1.771148] nvme nvme0: missing or invalid SUBNQN field.
[    1.811394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[    1.812123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.812759] usb usb3: Product: Generic Platform OHCI controller
[    1.813281] usb usb3: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM ohci_hcd
[    1.813871] usb usb3: SerialNumber: fe3a0000.usb
[    1.814664] hub 3-0:1.0: USB hub found
[    1.815024] hub 3-0:1.0: 1 port detected
[    1.815761] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.816504] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    1.817345] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
[    1.891515] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[    1.892248] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.892886] usb usb4: Product: Generic Platform OHCI controller
[    1.893412] usb usb4: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM ohci_hcd
[    1.894005] usb usb4: SerialNumber: fe3e0000.usb
[    1.894950] hub 4-0:1.0: USB hub found
[    1.895318] hub 4-0:1.0: 1 port detected
[    1.896430] uhci_hcd: USB Universal Host Controller Interface driver
[    1.898086] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.898768] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    1.899598] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.900479] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe900000
[    1.901349] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.902082] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.902721] usb usb5: Product: xHCI Host Controller
[    1.903157] usb usb5: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM xhci-hcd
[    1.903750] usb usb5: SerialNumber: xhci-hcd.0.auto
[    1.904688] hub 5-0:1.0: USB hub found
[    1.905059] hub 5-0:1.0: 1 port detected
[    1.905771] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.906412] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    1.907099] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.907759] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.908588] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.909320] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.909958] usb usb6: Product: xHCI Host Controller
[    1.910393] usb usb6: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM xhci-hcd
[    1.910986] usb usb6: SerialNumber: xhci-hcd.0.auto
[    1.911909] hub 6-0:1.0: USB hub found
[    1.912281] hub 6-0:1.0: 1 port detected
[    1.913144] usbcore: registered new interface driver uas
[    1.913780] usbcore: registered new interface driver usb-storage
[    1.914350] usbcore: registered new interface driver ums-alauda
[    1.914911] usbcore: registered new interface driver ums-cypress
[    1.915486] usbcore: registered new interface driver ums-datafab
[    1.916053] usbcore: registered new interface driver ums_eneub6250
[    1.916635] usbcore: registered new interface driver ums-freecom
[    1.917232] usbcore: registered new interface driver ums-isd200
[    1.917793] usbcore: registered new interface driver ums-jumpshot
[    1.918368] usbcore: registered new interface driver ums-karma
[    1.918920] usbcore: registered new interface driver ums-onetouch
[    1.919514] usbcore: registered new interface driver ums-realtek
[    1.920088] usbcore: registered new interface driver ums-sddr09
[    1.920650] usbcore: registered new interface driver ums-sddr55
[    1.921212] usbcore: registered new interface driver ums-usbat
[    1.921820] usbcore: registered new interface driver usbserial_generic
[    1.922422] usbserial: USB Serial support registered for generic
[    1.925839] mousedev: PS/2 mouse device common for all mice
[    1.929730] rk808 0-001b: chip id: 0x0
[    1.934830] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.935407] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.936013] DCDC_REG1: supplied by vcc_sysin
[    1.937379] DCDC_REG2: supplied by vcc_sysin
[    1.938289] DCDC_REG3: supplied by vcc_sysin
[    1.938920] DCDC_REG4: supplied by vcc_sysin
[    1.939839] LDO_REG1: supplied by vcc_sysin
[    1.941422] LDO_REG2: supplied by vcc_sysin
[    1.942003] vcc3v0_touch: Bringing 1800000uV into 3000000-3000000uV
[    1.943638] LDO_REG3: supplied by vcc_sysin
[    1.945080] LDO_REG4: supplied by vcc_sysin
[    1.945641] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
[    1.947300] LDO_REG5: supplied by vcc_sysin
[    1.948649] LDO_REG6: supplied by vcc_sysin
[    1.950091] LDO_REG7: supplied by vcc_sysin
[    1.951393] LDO_REG8: supplied by vcc_sysin
[    1.952860] SWITCH_REG1: supplied by vcc3v3_sys
[    1.953506] SWITCH_REG2: supplied by vcc3v3_sys
[    1.957448] rk808-rtc rk808-rtc: registered as rtc0
[    1.958715] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.959354] fan53555-reg: supplied by vcc_1v8
[    1.961565] random: fast init done
[    1.962027] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.962658] fan53555-reg: supplied by vcc_1v8
[    1.965770] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[    1.982492] device-mapper: uevent: version 1.0.3
[    1.983270] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.988981] sdhci: Secure Digital Host Controller Interface driver
[    1.989526] sdhci: Copyright(c) Pierre Ossman
[    1.990393] Synopsys Designware Multimedia Card Interface Driver
[    1.991725] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.992395] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.993007] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.993580] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[    1.994642] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.995174] mmc_host mmc0: card is non-removable.
[    2.117547] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    2.127543] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.142485] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    2.143153] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    2.143752] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    2.144317] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    2.145321] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[    2.145948] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
[    2.157603] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.172713] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.174793] mmc2: CQHCI version 5.10
[    2.180014] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.182090] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.184284] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.187552] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.191722] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[    2.201054] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    2.203256] ledtrig-cpu: registered to indicate activity on CPUs
[    2.204211] hid: raw HID events driver (C) Jiri Kosina
[    2.204765] usbcore: registered new interface driver usbhid
[    2.205253] usbhid: USB HID core driver
[    2.209222] Initializing XFRM netlink socket
[    2.209943] NET: Registered protocol family 10
[    2.235748] Segment Routing with IPv6
[    2.236143] mip6: Mobile IPv6
[    2.236409] NET: Registered protocol family 17
[    2.236983] Key type dns_resolver registered
[    2.237983] registered taskstats version 1
[    2.238347] Loading compiled-in X.509 certificates
[    2.238865] zswap: loaded using pool lzo/zbud
[    2.239331] Key type ._fscrypt registered
[    2.239684] Key type .fscrypt registered
[    2.240097] Key type big_key registered
[    2.244339] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    2.255669] Key type encrypted registered
[    2.279097] mmc2: Command Queue Engine enabled
[    2.279509] mmc2: new HS200 MMC card at address 0001
[    2.280601] mmcblk2: mmc2:0001 DA4128 116 GiB 
[    2.281138] mmcblk2boot0: mmc2:0001 DA4128 partition 1 4.00 MiB
[    2.281792] mmcblk2boot1: mmc2:0001 DA4128 partition 2 4.00 MiB
[    2.282505] mmcblk2rpmb: mmc2:0001 DA4128 partition 3 16.0 MiB, chardev (238:0)
[    2.285036]  mmcblk2: p1
[    2.289265] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.289913] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    2.290684] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.291540] xhci-hcd xhci-hcd.1.auto: irq 228, io mem 0xfe800000
[    2.292268] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    2.292990] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.293620] usb usb7: Product: xHCI Host Controller
[    2.294049] usb usb7: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM xhci-hcd
[    2.294634] usb usb7: SerialNumber: xhci-hcd.1.auto
[    2.295386] hub 7-0:1.0: USB hub found
[    2.295743] hub 7-0:1.0: 1 port detected
[    2.296280] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.296848] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    2.297586] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.298201] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.298971] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    2.299702] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.300337] usb usb8: Product: xHCI Host Controller
[    2.300775] usb usb8: Manufacturer: Linux 5.5.0-0.2-MANJARO-ARM xhci-hcd
[    2.301360] usb usb8: SerialNumber: xhci-hcd.1.auto
[    2.302070] hub 8-0:1.0: USB hub found
[    2.302413] hub 8-0:1.0: 1 port detected
[    2.304317] rk808-rtc rk808-rtc: setting system clock to 2013-02-12T11:37:33 UTC (1360669053)
[    2.305595] ALSA device list:
[    2.305860]   No soundcards found.
[    2.306342] ttyS2 - failed to request DMA
[    2.320083] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    2.320816] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.321451] usb 2-1: Product: USB2.0 Hub
[    2.323214] hub 2-1:1.0: USB hub found
[    2.324097] hub 2-1:1.0: 4 ports detected
[    2.417327] usb 3-1: new low-speed USB device number 2 using ohci-platform
[    2.647412] usb 2-1.2: new high-speed USB device number 3 using ehci-platform
[    2.668311] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 55
[    2.674525] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    2.692288] usb 3-1: New USB device found, idVendor=258a, idProduct=001e, bcdDevice= 1.00
[    2.693029] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.693680] usb 3-1: Product: USB KEYBOARD
[    2.694054] usb 3-1: Manufacturer: HAILUCK CO.,LTD
[    2.704001] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0001/input/input0
[    2.769313] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
[    2.796624] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input1
[    2.799108] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input2
[    2.801336] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input3
[    2.848762] usb 2-1.2: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[    2.849512] usb 2-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.850162] usb 2-1.2: Product: USB Camera
[    2.850531] usb 2-1.2: Manufacturer: Sonix Technology Co., Ltd.
[    2.868146] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input4
[    2.869916] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input5
[    2.872587] hid-generic 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[    3.462980] nvme nvme0: allocated 128 MiB host memory buffer.
[    3.497637] nvme nvme0: 6/0/0 default/read/poll queues
[    3.522435] Freeing unused kernel memory: 1152K
[    3.557633] Run /init as init process
:: running early hook [udev]
Starting version 244.1-1-arch
:: running hook [udev]
:: Triggering uevents...
[    3.829728] input: gpio-keys as /devices/platform/gpio-keys/input/input6
[    4.305870] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input7
[    4.307726] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input8
[    4.309426] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input9
[    4.378546] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input10
[    4.380155] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input11
[    4.382538] hid-multitouch 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
:: performing fsck on '/dev/nvme0n1'
PBPNVME: clean, 715474/29310976 files, 7564845/117212886 blocks
:: mounting '/dev/nvme0n1' on real root
[    4.473744] EXT4-fs (nvme0n1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    4.620822] systemd[1]: System time before build time, advancing clock.
[    4.627539] systemd[1]: systemd 244.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.629988] systemd[1]: Detected architecture arm64.

Welcome to Manjaro ARM!