[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.205 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Sat Nov 30 21:09:31 EST 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] On node 0 totalpages: 1015296 [ 0.000000] DMA zone: 15864 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1015296 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] PERCPU: Embedded 20 pages/cpu @ffffffc0f7ed6000 s42024 r8192 d31704 u81920 [ 0.000000] pcpu-alloc: s42024 r8192 d31704 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: console=ttyS2,1500000n8 rw root=/dev/mmcblk1p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=06:38:36:17:fd:ea eth1addr=06:38:36:17:fd:0a serial=f9796353be11fe3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 zswap.enabled=1 video=HDMI-A-1:1920x1080@60 video=eDP-1:1920x1080@60 quiet loglevel=3 vga=current earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 usbcore.autosuspend=-1 net.ifnames=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0xf7e8e000-0xf7ece000] (0MB) [ 0.000000] Memory: 3962272K/4061184K available (15422K kernel code, 1976K rwdata, 6140K rodata, 1216K init, 762K bss, 98912K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) .init : 0xffffff80095a0000 - 0xffffff80096d0000 ( 1216 KB) .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) .rodata : 0xffffff8008f90000 - 0xffffff80095a0000 ( 6208 KB) .data : 0xffffff80096d0000 - 0xffffff80098be008 ( 1977 KB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f3080000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f3010000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f3020000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001483] Console: colour dummy device 80x25 [ 0.001510] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.001524] pid_max: default: 32768 minimum: 301 [ 0.001669] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001682] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002468] Initializing cgroup subsys memory [ 0.002499] Initializing cgroup subsys devices [ 0.002514] Initializing cgroup subsys freezer [ 0.002532] Initializing cgroup subsys net_cls [ 0.002545] Initializing cgroup subsys net_prio [ 0.002573] ftrace: allocating 55827 entries in 219 pages [ 0.155948] sched-energy: Sched-energy-costs installed from DT [ 0.155967] CPU0: update cpu_capacity 401 [ 0.156023] ASID allocator initialised with 32768 entries [ 0.159991] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.160572] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.161973] Detected VIPT I-cache on CPU1 [ 0.162006] CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.162037] CPU1: using LPI pending table @0x00000000f32e0000 [ 0.162080] CPU1: update cpu_capacity 401 [ 0.162085] CPU1: Booted secondary processor [410fd034] [ 0.162632] Detected VIPT I-cache on CPU2 [ 0.162653] CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.162680] CPU2: using LPI pending table @0x00000000f3310000 [ 0.162706] CPU2: update cpu_capacity 401 [ 0.162710] CPU2: Booted secondary processor [410fd034] [ 0.163255] Detected VIPT I-cache on CPU3 [ 0.163276] CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.163303] CPU3: using LPI pending table @0x00000000f3360000 [ 0.163328] CPU3: update cpu_capacity 401 [ 0.163332] CPU3: Booted secondary processor [410fd034] [ 0.163867] Detected PIPT I-cache on CPU4 [ 0.163897] CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.163936] CPU4: using LPI pending table @0x00000000f33a0000 [ 0.163974] CPU4: update cpu_capacity 1024 [ 0.163978] CPU4: Booted secondary processor [410fd082] [ 0.164536] Detected PIPT I-cache on CPU5 [ 0.164556] CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.164592] CPU5: using LPI pending table @0x00000000f33d0000 [ 0.164619] CPU5: update cpu_capacity 1024 [ 0.164622] CPU5: Booted secondary processor [410fd082] [ 0.164711] Brought up 6 CPUs [ 0.164795] SMP: Total of 6 processors activated. [ 0.164804] CPU features: detected feature: GIC system register CPU interface [ 0.164814] CPU features: detected feature: 32-bit EL0 Support [ 0.164826] CPU: All CPU(s) started at EL2 [ 0.164874] alternatives: patching kernel code [ 0.166328] devtmpfs: initialized [ 0.184671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.184693] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.185194] xor: measuring software checksum speed [ 0.195236] 8regs : 2860.000 MB/sec [ 0.205292] 8regs_prefetch: 2556.000 MB/sec [ 0.215348] 32regs : 3208.000 MB/sec [ 0.225403] 32regs_prefetch: 2848.000 MB/sec [ 0.225410] xor: using function: 32regs (3208.000 MB/sec) [ 0.225429] pinctrl core: initialized pinctrl subsystem [ 0.225656] regulator-dummy: no parameters [ 0.227464] NET: Registered protocol family 16 [ 0.233140] cpuidle: using governor ladder [ 0.237154] cpuidle: using governor menu [ 0.237936] vdso: 2 pages (1 code @ ffffff8008f96000, 1 data @ ffffff80096d4000) [ 0.237964] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.238525] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.254036] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.254114] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.254186] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.254260] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ 0.254349] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4 [ 0.262073] console [pstore-1] enabled [ 0.262082] pstore: Registered ramoops as persistent store backend [ 0.262091] ramoops: attached 0xf0000@0x110000, ecc: 0/0 [ 0.314931] raid6: int64x1 gen() 449 MB/s [ 0.332032] raid6: int64x1 xor() 369 MB/s [ 0.349188] raid6: int64x2 gen() 781 MB/s [ 0.366231] raid6: int64x2 xor() 580 MB/s [ 0.383345] raid6: int64x4 gen() 1097 MB/s [ 0.400424] raid6: int64x4 xor() 666 MB/s [ 0.417506] raid6: int64x8 gen() 851 MB/s [ 0.434603] raid6: int64x8 xor() 623 MB/s [ 0.451751] raid6: neonx1 gen() 910 MB/s [ 0.468795] raid6: neonx1 xor() 621 MB/s [ 0.485910] raid6: neonx2 gen() 1562 MB/s [ 0.503000] raid6: neonx2 xor() 992 MB/s [ 0.520113] raid6: neonx4 gen() 2011 MB/s [ 0.537200] raid6: neonx4 xor() 1181 MB/s [ 0.554316] raid6: neonx8 gen() 1699 MB/s [ 0.571378] raid6: neonx8 xor() 1255 MB/s [ 0.571386] raid6: using algorithm neonx4 gen() 2011 MB/s [ 0.571393] raid6: .... xor() 1181 MB/s, rmw enabled [ 0.571400] raid6: using intx1 recovery algorithm [ 0.571955] ACPI: Interpreter disabled. [ 0.572508] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0) [ 0.572553] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0) [ 0.572860] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]' [ 0.572886] vcc_sys: 5000 mV [ 0.573065] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV [ 0.573121] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]' [ 0.573142] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree [ 0.573194] vcc3v3_sys: supplied by vcc_sys [ 0.573239] vcc3v3_sys: 3300 mV [ 0.573393] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV [ 0.573553] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-host-regulator[0]' [ 0.573612] of_get_named_gpiod_flags: parsed 'gpios' property of node '/vcc5v0-host-regulator[0]' - status (0) [ 0.573663] of_get_named_gpiod_flags: parsed 'gpios' property of node '/vcc5v0-host-regulator[1]' - status (0) [ 0.573728] vcc5v0_host: no parameters [ 0.573880] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV [ 0.574009] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd-en-regulator[0]' - status (0) [ 0.574049] reg-fixed-voltage vcc-lcd-en-regulator: Looking up vin-supply from device tree [ 0.574087] vcc_lcd_en: supplied by vcc3v3_sys [ 0.574130] vcc_lcd_en: at 3300 mV [ 0.574286] reg-fixed-voltage vcc-lcd-en-regulator: vcc_lcd_en supplying 0uV [ 0.574349] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]' [ 0.574369] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.574385] vcc1v8_sdio: unable to resolve supply [ 0.574395] vcc1v8_sdio: 1800 mV [ 0.574520] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.574538] vcc1v8_sdio: regulator get failed, ret=-517 [ 0.574550] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.574565] vcc1v8_sdio: unable to resolve supply [ 0.574576] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV [ 0.574710] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v0-sdio[0]' - status (0) [ 0.574756] reg-fixed-voltage vcc3v0-sdio: Looking up vin-supply from device tree [ 0.574793] vcc3v0_sdio: supplied by vcc3v3_sys [ 0.574841] vcc3v0_sdio: 3000 mV [ 0.574998] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.575017] vcc1v8_sdio: unable to resolve supply [ 0.575028] reg-fixed-voltage vcc3v0-sdio: vcc3v0_sdio supplying 3000000uV [ 0.575662] iommu: Adding device ff650000.vpu_service to group 0 [ 0.575767] iommu: Adding device ff660000.rkvdec to group 1 [ 0.575881] iommu: Adding device ff8f0000.vop to group 2 [ 0.575977] iommu: Adding device ff900000.vop to group 3 [ 0.576484] rk_iommu ff650800.iommu: can't get sclk [ 0.576769] rk_iommu ff660480.iommu: can't get sclk [ 0.576987] rk_iommu ff8f3f00.iommu: can't get sclk [ 0.577160] rk_iommu ff903f00.iommu: can't get sclk [ 0.577527] SCSI subsystem initialized [ 0.577710] libata version 3.00 loaded. [ 0.577916] usbcore: registered new interface driver usbfs [ 0.577966] usbcore: registered new interface driver hub [ 0.578051] usbcore: registered new device driver usb [ 0.578169] media: Linux media interface: v0.10 [ 0.578207] Linux video capture interface: v2.00 [ 0.578337] pps_core: LinuxPPS API ver. 1 registered [ 0.578346] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.578368] PTP clock support registered [ 0.579662] Advanced Linux Sound Architecture Driver Initialized. [ 0.580202] Bluetooth: Core ver 2.21 [ 0.580231] NET: Registered protocol family 31 [ 0.580239] Bluetooth: HCI device and connection manager initialized [ 0.580252] Bluetooth: HCI socket layer initialized [ 0.580264] Bluetooth: L2CAP socket layer initialized [ 0.580301] Bluetooth: SCO socket layer initialized [ 0.580940] rockchip-cpuinfo cpuinfo: Serial : f9796353be11fe35 [ 0.582084] clocksource: Switched to clocksource arch_sys_counter [ 0.624916] FS-Cache: Loaded [ 0.625141] pnp: PnP ACPI: disabled [ 0.633601] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.633876] NET: Registered protocol family 2 [ 0.634357] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.634621] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.635457] TCP: Hash tables configured (established 32768 bind 32768) [ 0.635582] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.635746] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.636144] NET: Registered protocol family 1 [ 0.636464] RPC: Registered named UNIX socket transport module. [ 0.636473] RPC: Registered udp transport module. [ 0.636481] RPC: Registered tcp transport module. [ 0.636488] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.637165] PCI: CLS 0 bytes, default 64 [ 0.638316] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.638412] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.639870] kvm [1]: 8-bit VMID [ 0.639880] kvm [1]: Hyp mode initialized successfully [ 0.640009] kvm [1]: interrupt-controller@fff20000 IRQ10 [ 0.640257] kvm [1]: timer IRQ12 [ 0.643554] Initialise system trusted keyring [ 0.649915] zbud: loaded [ 0.652116] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.652878] NFS: Registering the id_resolver key type [ 0.652913] Key type id_resolver registered [ 0.652921] Key type id_legacy registered [ 0.652940] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.653636] fuse init (API version 7.23) [ 0.654013] SGI XFS with security attributes, no debug enabled [ 0.655694] aufs 4.4-20170911 [ 0.659990] NET: Registered protocol family 38 [ 0.660019] async_tx: api initialized (async) [ 0.660041] Key type asymmetric registered [ 0.660056] Asymmetric key parser 'x509' registered [ 0.660251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.660268] io scheduler noop registered [ 0.660279] io scheduler deadline registered [ 0.660406] io scheduler cfq registered (default) [ 0.661486] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree [ 0.661900] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree [ 0.661914] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ 0.662000] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply from device tree [ 0.662012] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ 0.662027] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator [ 0.663700] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree [ 0.663715] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed [ 0.664562] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply from device tree [ 0.664578] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply property in node /power-management@ff310000/power-controller failed [ 0.664871] phy phy-ff800000.phy.3: Looking up phy-supply from device tree [ 0.664883] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed [ 0.664983] phy phy-ff800000.phy.4: Looking up phy-supply from device tree [ 0.664995] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed [ 0.665120] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply from device tree [ 0.665134] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply property in node /power-management@ff310000/power-controller failed [ 0.666572] of_get_named_gpiod_flags: parsed 'gpios' property of node '/dc-charger[0]' - status (0) [ 0.667175] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree [ 0.667325] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree [ 0.667790] universal-charger usb-charger: GPIO lookup for consumer dc-det [ 0.667801] universal-charger usb-charger: using device tree for GPIO lookup [ 0.667812] of_get_named_gpiod_flags: can't parse 'dc-det-gpios' property of node '/usb-charger[0]' [ 0.667822] of_get_named_gpiod_flags: can't parse 'dc-det-gpio' property of node '/usb-charger[0]' [ 0.667832] universal-charger usb-charger: using lookup tables for GPIO lookup [ 0.667841] universal-charger usb-charger: lookup for GPIO dc-det failed [ 0.667851] universal-charger usb-charger: invalid dc det gpio! [ 0.667872] universal-charger usb-charger: init usb failed! [ 0.668422] Boot mode: normal [ 0.669470] pwm-backlight edp-backlight: GPIO lookup for consumer enable [ 0.669482] pwm-backlight edp-backlight: using device tree for GPIO lookup [ 0.669493] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-backlight[0]' [ 0.669503] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-backlight[0]' [ 0.669512] pwm-backlight edp-backlight: using lookup tables for GPIO lookup [ 0.669522] pwm-backlight edp-backlight: lookup for GPIO enable failed [ 0.669533] pwm-backlight edp-backlight: Looking up power-supply from device tree [ 0.669844] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree [ 0.669857] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed [ 0.669872] rk-vcodec ff650000.vpu_service: no regulator for vcodec [ 0.670142] rk-vcodec ff650000.vpu_service: probe device [ 0.670374] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled [ 0.670920] rk-vcodec ff650000.vpu_service: init success [ 0.671175] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree [ 0.671189] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed [ 0.671205] rk-vcodec ff660000.rkvdec: no regulator for vcodec [ 0.671628] rk-vcodec ff660000.rkvdec: probe device [ 0.671822] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled [ 0.672228] rk-vcodec ff660000.rkvdec: could not find power_model node [ 0.672239] rk-vcodec ff660000.rkvdec: init success [ 0.674040] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.674054] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.675546] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.675559] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.675851] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 0.676304] pwm-regulator vdd-log: GPIO lookup for consumer enable [ 0.676315] pwm-regulator vdd-log: using device tree for GPIO lookup [ 0.676327] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]' [ 0.676338] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]' [ 0.676347] pwm-regulator vdd-log: using lookup tables for GPIO lookup [ 0.676357] pwm-regulator vdd-log: lookup for GPIO enable failed [ 0.676402] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ 0.676490] pwm-regulator: supplied by vcc_sys [ 0.676542] vdd_log: 800 <--> 1400 mV at 896 mV [ 0.676748] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.676769] vcc1v8_sdio: unable to resolve supply [ 0.677236] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.677890] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A [ 0.678413] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A [ 0.678453] console [ttyS2] enabled [ 0.678462] bootconsole [uart0] disabled [ 0.679570] [drm] Initialized drm 1.1.0 20060810 [ 0.680280] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_hdcp-supply from device tree [ 0.680295] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_hdcp-supply property in node /power-management@ff310000/power-controller failed [ 0.683735] [drm] Rockchip DRM driver version: v1.0.1 [ 0.684308] usbcore: registered new interface driver udl [ 0.685479] panel-simple edp-panel: Looking up power-supply from device tree [ 0.685503] panel-simple edp-panel: failed to get power regulator: -517 [ 0.686183] Unable to detect cache hierarchy for CPU 0 [ 0.686925] brd: module loaded [ 0.692063] loop: module loaded [ 0.692601] zram: Added device: zram0 [ 0.692967] lkdtm: No crash points registered, enable through debugfs [ 0.694211] rockchip-spi ff1d0000.spi: no high_speed pinctrl state [ 0.695173] CAN device driver interface [ 0.695187] sja1000 CAN netdevice driver [ 0.695255] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.695263] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.695314] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.695322] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.695377] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.695384] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.695434] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 0.695441] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.695491] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k [ 0.695498] ixgbe: Copyright (c) 1999-2015 Intel Corporation. [ 0.696377] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 0.696432] usbcore: registered new interface driver at76c50x-usb [ 0.696491] Broadcom 43xx driver loaded [ Features: PNL ] [ 0.696658] usbcore: registered new interface driver zd1211rw [ 0.696709] usbcore: registered new interface driver rtl8187 [ 0.696764] usbcore: registered new interface driver rtl8xxxu [ 0.696818] usbcore: registered new interface driver rndis_wlan [ 0.696875] usbcore: registered new interface driver usb8xxx [ 0.697051] usbcore: registered new interface driver rt2500usb [ 0.697125] usbcore: registered new interface driver rt73usb [ 0.697176] usbcore: registered new interface driver rt2800usb [ 0.697220] usbcore: registered new interface driver mt7601u [ 0.697365] usbcore: registered new interface driver ath6kl_usb [ 0.697409] usbcore: registered new interface driver ar5523 [ 0.697628] usbcore: registered new interface driver mwifiex_usb [ 0.697702] usbcore: registered new interface driver brcmfmac [ 0.697755] Rockchip WiFi SYS interface (V1.00) ... [ 0.697829] usbcore: registered new interface driver rtl8150 [ 0.697876] usbcore: registered new interface driver r8152 [ 0.697926] usbcore: registered new interface driver asix [ 0.697970] usbcore: registered new interface driver ax88179_178a [ 0.698014] usbcore: registered new interface driver cdc_ether [ 0.698059] usbcore: registered new interface driver rndis_host [ 0.698149] usbcore: registered new interface driver cdc_ncm [ 0.698194] usbcore: registered new interface driver cdc_mbim [ 0.699846] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply from device tree [ 0.699863] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply property in node /power-management@ff310000/power-controller failed [ 0.700012] rockchip-dwc3 usb0: failed to get drvdata dwc3 [ 0.704514] rockchip-dwc3 usb1: fail to get drvdata hcd [ 0.705774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.705813] ehci-pci: EHCI PCI platform driver [ 0.705882] ehci-platform: EHCI generic platform driver [ 0.709779] ehci-platform fe3c0000.usb: EHCI Host Controller [ 0.709943] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 [ 0.710059] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000 [ 0.716104] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.716274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.716287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.716297] usb usb1: Product: EHCI Host Controller [ 0.716306] usb usb1: Manufacturer: Linux 4.4.205 ehci_hcd [ 0.716316] usb usb1: SerialNumber: fe3c0000.usb [ 0.716782] hub 1-0:1.0: USB hub found [ 0.716815] hub 1-0:1.0: 1 port detected [ 0.717432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.717457] ohci-platform: OHCI generic platform driver [ 0.717966] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 0.718157] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 [ 0.718250] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000 [ 0.773245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.773258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.773268] usb usb2: Product: Generic Platform OHCI controller [ 0.773278] usb usb2: Manufacturer: Linux 4.4.205 ohci_hcd [ 0.773286] usb usb2: SerialNumber: fe3e0000.usb [ 0.773746] hub 2-0:1.0: USB hub found [ 0.773779] hub 2-0:1.0: 1 port detected [ 0.774776] usbcore: registered new interface driver cdc_wdm [ 0.774834] usbcore: registered new interface driver uas [ 0.774922] usbcore: registered new interface driver usb-storage [ 0.774969] usbcore: registered new interface driver ums-alauda [ 0.775013] usbcore: registered new interface driver ums-cypress [ 0.775060] usbcore: registered new interface driver ums-datafab [ 0.775121] usbcore: registered new interface driver ums_eneub6250 [ 0.775169] usbcore: registered new interface driver ums-freecom [ 0.775215] usbcore: registered new interface driver ums-isd200 [ 0.775260] usbcore: registered new interface driver ums-jumpshot [ 0.775305] usbcore: registered new interface driver ums-karma [ 0.775349] usbcore: registered new interface driver ums-onetouch [ 0.775398] usbcore: registered new interface driver ums-realtek [ 0.775442] usbcore: registered new interface driver ums-sddr09 [ 0.775482] usbcore: registered new interface driver ums-sddr55 [ 0.775527] usbcore: registered new interface driver ums-usbat [ 0.775609] usbcore: registered new interface driver usbserial [ 0.775648] usbcore: registered new interface driver usbserial_generic [ 0.775679] usbserial: USB Serial support registered for generic [ 0.775723] usbcore: registered new interface driver cp210x [ 0.775752] usbserial: USB Serial support registered for cp210x [ 0.775811] usbcore: registered new interface driver ftdi_sio [ 0.775840] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.775930] usbcore: registered new interface driver keyspan [ 0.775959] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 0.775988] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 0.776016] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 0.776044] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 0.776103] usbcore: registered new interface driver option [ 0.776135] usbserial: USB Serial support registered for GSM modem (1-port) [ 0.776253] usbcore: registered new interface driver oti6858 [ 0.776282] usbserial: USB Serial support registered for oti6858 [ 0.776328] usbcore: registered new interface driver pl2303 [ 0.776356] usbserial: USB Serial support registered for pl2303 [ 0.776405] usbcore: registered new interface driver qcserial [ 0.776434] usbserial: USB Serial support registered for Qualcomm USB modem [ 0.776488] usbcore: registered new interface driver sierra [ 0.776516] usbserial: USB Serial support registered for Sierra USB modem [ 0.777765] usbcore: registered new interface driver iforce [ 0.778359] usbcore: registered new interface driver xpad [ 0.778795] usbcore: registered new interface driver usbtouchscreen [ 0.779129] sensor_register_slave:mma8452,id=17 [ 0.779142] sensor_register_slave:lis3dh,id=7 [ 0.779154] sensor_register_slave:mma7660,id=18 [ 0.779166] sensor_register_slave:lsm303d,id=22 [ 0.779178] sensor_register_slave:mpu6880_acc,id=24 [ 0.779189] sensor_register_slave:mpu6500_acc,id=25 [ 0.779201] sensor_register_slave:lsm330_acc,id=26 [ 0.779213] sensor_register_slave:akm8975,id=30 [ 0.779224] sensor_register_slave:akm8963,id=31 [ 0.779236] sensor_register_slave:l3g4200d,id=45 [ 0.779247] sensor_register_slave:l3g20d,id=46 [ 0.779258] sensor_register_slave:ewtsa,id=47 [ 0.779270] sensor_register_slave:lsm330_gyro,id=51 [ 0.779281] sensor_register_slave:cm3217,id=53 [ 0.779293] sensor_register_slave:cm3218,id=54 [ 0.780004] i2c /dev entries driver [ 0.780947] fan53555-regulator 0-0040: GPIO lookup for consumer vsel [ 0.780960] fan53555-regulator 0-0040: using device tree for GPIO lookup [ 0.780993] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0) [ 0.781387] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 0.781408] fan53555-regulator 0-0040: Looking up vin-supply from device tree [ 0.781461] fan53555-reg: supplied by vcc_sys [ 0.782653] vdd_cpu_b: 712 <--> 1400 mV at 900 mV [ 0.783022] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.783044] vcc1v8_sdio: unable to resolve supply [ 0.783296] fan53555-regulator 0-0041: GPIO lookup for consumer vsel [ 0.783306] fan53555-regulator 0-0041: using device tree for GPIO lookup [ 0.783335] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0) [ 0.783695] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 0.783711] fan53555-regulator 0-0041: Looking up vin-supply from device tree [ 0.783751] fan53555-reg: supplied by vcc_sys [ 0.784975] vdd_gpu: 712 <--> 1200 mV at 1100 mV [ 0.785335] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.785356] vcc1v8_sdio: unable to resolve supply [ 0.785951] rk808 0-001b: Pmic Chip id: 0x0 [ 0.788659] rk808 0-001b: GPIO lookup for consumer dvs [ 0.788671] rk808 0-001b: using device tree for GPIO lookup [ 0.788683] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]' [ 0.788694] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' [ 0.788703] rk808 0-001b: using lookup tables for GPIO lookup [ 0.788713] rk808 0-001b: lookup for GPIO dvs failed [ 0.788723] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.788732] rk808 0-001b: GPIO lookup for consumer dvs [ 0.788740] rk808 0-001b: using device tree for GPIO lookup [ 0.788750] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]' [ 0.788761] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]' [ 0.788769] rk808 0-001b: using lookup tables for GPIO lookup [ 0.788778] rk808 0-001b: lookup for GPIO dvs failed [ 0.788787] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.788836] rk808 0-001b: Looking up vcc1-supply from device tree [ 0.788890] DCDC_REG1: supplied by vcc_sys [ 0.789379] vdd_center: 750 <--> 1350 mV at 900 mV [ 0.789593] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.789614] vcc1v8_sdio: unable to resolve supply [ 0.789661] rk808 0-001b: Looking up vcc2-supply from device tree [ 0.789700] DCDC_REG2: supplied by vcc_sys [ 0.790021] vdd_cpu_l: 750 <--> 1250 mV at 900 mV [ 0.790241] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.790263] vcc1v8_sdio: unable to resolve supply [ 0.790306] rk808 0-001b: Looking up vcc3-supply from device tree [ 0.790343] DCDC_REG3: supplied by vcc_sys [ 0.790380] vcc_ddr: at 5000 mV [ 0.790563] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.790585] vcc1v8_sdio: unable to resolve supply [ 0.790632] rk808 0-001b: Looking up vcc4-supply from device tree [ 0.790670] DCDC_REG4: supplied by vcc_sys [ 0.790861] vcc_1v8: 1800 mV [ 0.791068] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree [ 0.791107] vcc1v8_sdio: supplied by vcc_1v8 [ 0.791188] rk808 0-001b: Looking up vcc6-supply from device tree [ 0.791227] LDO_REG1: supplied by vcc_sys [ 0.792089] vcc1v8_dvp: 1800 mV [ 0.792335] rk808 0-001b: Looking up vcc6-supply from device tree [ 0.792375] LDO_REG2: supplied by vcc_sys [ 0.792560] LDO_REG2: at 1800 mV [ 0.792803] rk808 0-001b: Looking up vcc7-supply from device tree [ 0.792843] LDO_REG3: supplied by vcc_sys [ 0.793554] vcc1v8_pmu: 1800 mV [ 0.793808] rk808 0-001b: Looking up vcc9-supply from device tree [ 0.793847] LDO_REG4: supplied by vcc_sys [ 0.794032] vcc_sd: Bringing 3300000uV into 3000000-3000000uV [ 0.794172] vcc_sd: ramp_delay not set [ 0.794710] vcc_sd: 1800 <--> 3000 mV at 3000 mV [ 0.794955] rk808 0-001b: Looking up vcc9-supply from device tree [ 0.794994] LDO_REG5: supplied by vcc_sys [ 0.795717] vcca3v0_codec: 3000 mV [ 0.795969] rk808 0-001b: Looking up vcc10-supply from device tree [ 0.796008] LDO_REG6: supplied by vcc_sys [ 0.796720] vcc_1v5: 1500 mV [ 0.796981] rk808 0-001b: Looking up vcc7-supply from device tree [ 0.797020] LDO_REG7: supplied by vcc_sys [ 0.797733] vcca1v8_codec: 1800 mV [ 0.797997] rk808 0-001b: Looking up vcc11-supply from device tree [ 0.798037] LDO_REG8: supplied by vcc_sys [ 0.798750] vcc_3v0: 3000 mV [ 0.799018] rk808 0-001b: Looking up vcc8-supply from device tree [ 0.799059] SWITCH_REG1: supplied by vcc3v3_sys [ 0.799112] vcc3v3_s3: at 3300 mV [ 0.799356] rk808 0-001b: Looking up vcc12-supply from device tree [ 0.799398] SWITCH_REG2: supplied by vcc_lcd_en [ 0.900145] vcc3v3_s0: at 3300 mV [ 0.904122] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 [ 0.904628] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009bcc000 [ 0.905676] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009bce000 [ 0.906968] fusb302 4-0022: GPIO lookup for consumer int-n [ 0.906984] fusb302 4-0022: using device tree for GPIO lookup [ 0.907028] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ 0.907066] fusb302 4-0022: GPIO lookup for consumer vbus-5v [ 0.907098] fusb302 4-0022: using device tree for GPIO lookup [ 0.907135] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ 0.907170] fusb302 4-0022: GPIO lookup for consumer vbus-other [ 0.907182] fusb302 4-0022: using device tree for GPIO lookup [ 0.907196] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 0.907210] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 0.907222] fusb302 4-0022: using lookup tables for GPIO lookup [ 0.907234] fusb302 4-0022: lookup for GPIO vbus-other failed [ 0.907247] fusb302 4-0022: GPIO lookup for consumer discharge [ 0.907258] fusb302 4-0022: using device tree for GPIO lookup [ 0.907271] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 0.907284] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 0.907296] fusb302 4-0022: using lookup tables for GPIO lookup [ 0.907308] fusb302 4-0022: lookup for GPIO discharge failed [ 0.916904] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE [ 0.917191] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input0 [ 0.949643] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 0.949928] cw201x 4-0062: cw2015/cw2013 driver v1.2 probe sucess [ 0.949980] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009bd0000 [ 0.951775] IR NEC protocol handler initialized [ 0.951793] IR RC5(x/sz) protocol handler initialized [ 0.951810] IR RC6 protocol handler initialized [ 0.951826] IR JVC protocol handler initialized [ 0.951842] IR Sony protocol handler initialized [ 0.951859] IR SANYO protocol handler initialized [ 0.951875] IR Sharp protocol handler initialized [ 0.951891] IR MCE Keyboard/mouse protocol handler initialized [ 0.951908] IR XMP protocol handler initialized [ 0.953249] usbcore: registered new interface driver uvcvideo [ 0.953259] USB Video Class driver (1.1.1) [ 0.954912] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 [ 0.955167] rockchip-thermal ff260000.tsadc: tsadc is probed successfully! [ 0.956111] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset [ 0.956468] md: raid0 personality registered for level 0 [ 0.956485] md: raid1 personality registered for level 1 [ 0.956499] md: raid10 personality registered for level 10 [ 0.956791] md: raid6 personality registered for level 6 [ 0.956801] md: raid5 personality registered for level 5 [ 0.956811] md: raid4 personality registered for level 4 [ 0.957241] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.957259] device-mapper: raid: Loading target version 1.7.0 [ 0.957276] Bluetooth: Virtual HCI driver ver 1.5 [ 0.957471] Bluetooth: HCI UART driver ver 2.3 [ 0.957484] Bluetooth: HCI UART protocol H4 registered [ 0.957494] Bluetooth: HCI UART protocol ATH3K registered [ 0.957600] usbcore: registered new interface driver bfusb [ 0.957677] usbcore: registered new interface driver btusb [ 0.957691] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1 [ 0.957700] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5 [ 0.957709] rtk_btusb: Register usb char device interface for BT driver [ 0.957989] usbcore: registered new interface driver rtk_btusb [ 0.967232] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 0.967285] HiSax: Linux Driver for passive ISDN cards [ 0.967294] HiSax: Version 3.5 (kernel) [ 0.967304] HiSax: Layer1 Revision 2.46.2.5 [ 0.967312] HiSax: Layer2 Revision 2.30.2.4 [ 0.967321] HiSax: TeiMgr Revision 2.20.2.3 [ 0.967330] HiSax: Layer3 Revision 2.22.2.3 [ 0.967339] HiSax: LinkLayer Revision 2.59.2.4 [ 0.967375] HiSax: Total 1 card defined [ 0.967402] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) [ 0.967413] HiSax: W6692 driver Rev. 1.18.2.4 [ 0.967426] W6692: No PCI card found [ 0.967443] HiSax: Card Winbond 6692 not installed ! [ 0.967628] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $ [ 0.967745] usbcore: registered new interface driver st5481_usb [ 0.967768] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0) [ 0.967831] usbcore: registered new interface driver hfc_usb [ 0.967847] HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10 [ 0.967856] HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de [ 0.967917] HFC-4S/8S: found 0 cards [ 0.967931] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 [ 0.967947] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 [ 0.969036] cpu cpu0: leakage=20 [ 0.969104] cpu cpu0: Looking up cpu-supply from device tree [ 0.970621] cpu cpu4: leakage=32 [ 0.970655] cpu cpu4: Looking up cpu-supply from device tree [ 0.973020] cpu cpu0: Looking up cpu-supply from device tree [ 0.973330] cpu cpu0: Looking up cpu-supply from device tree [ 0.973922] cpu cpu0: avs=0 [ 0.974026] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ 0.974753] cpu cpu0: failed to find power_model node [ 0.975147] cpu cpu4: Looking up cpu-supply from device tree [ 0.975783] cpu cpu4: avs=0 [ 0.975893] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ 0.978448] cpu cpu4: failed to find power_model node [ 0.979311] sdhci: Secure Digital Host Controller Interface driver [ 0.979315] sdhci: Copyright(c) Pierre Ossman [ 0.979320] Synopsys Designware Multimedia Card Interface Driver [ 0.979743] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. [ 0.979768] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. [ 0.979781] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a [ 0.979814] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo [ 0.979837] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree [ 0.979896] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree [ 0.979940] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp [ 0.979945] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup [ 0.979951] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]' [ 0.979956] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]' [ 0.979961] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup [ 0.979965] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed [ 0.980026] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply from device tree [ 0.980032] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply property in node /power-management@ff310000/power-controller failed [ 0.980452] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. [ 0.980466] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. [ 0.980476] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a [ 0.980500] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ 0.980510] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree [ 0.980557] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree [ 0.980590] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd [ 0.980595] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ 0.980600] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]' [ 0.980605] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]' [ 0.980610] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ 0.980614] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed [ 0.980619] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp [ 0.980623] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ 0.980627] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]' [ 0.980632] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]' [ 0.980636] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ 0.980640] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed [ 0.993461] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.006327] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized [ 1.007401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.008801] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp [ 1.008830] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup [ 1.008860] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]' [ 1.008886] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]' [ 1.008911] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup [ 1.008936] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed [ 1.010186] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree [ 1.010219] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed [ 1.010292] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree [ 1.010322] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed [ 1.010370] sdhci-arasan fe330000.sdhci: No vmmc regulator found [ 1.010393] sdhci-arasan fe330000.sdhci: No vqmmc regulator found [ 1.041191] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ 1.043167] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/hpout-en[0]' - status (0) [ 1.043755] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green-led[0]' - status (0) [ 1.044116] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red-led[0]' - status (0) [ 1.044926] ledtrig-cpu: registered to indicate activity on CPUs [ 1.045241] hidraw: raw HID events driver (C) Jiri Kosina [ 1.047564] usbcore: registered new interface driver usbhid [ 1.047572] usbhid: USB HID core driver [ 1.048833] usbcore: registered new interface driver snd-usb-audio [ 1.049355] of_get_named_gpiod_flags: parsed 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0) [ 1.049382] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0) [ 1.052130] u32 classifier [ 1.052144] Netfilter messages via NETLINK v0.30. [ 1.052188] ip_set: protocol 6 [ 1.052291] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.052323] Initializing XFRM netlink socket [ 1.052596] NET: Registered protocol family 10 [ 1.053102] NET: Registered protocol family 17 [ 1.053117] NET: Registered protocol family 15 [ 1.053138] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.053152] Bridge firewalling registered [ 1.053157] can: controller area network core (rev 20120528 abi 9) [ 1.053234] NET: Registered protocol family 29 [ 1.053240] can: raw protocol (rev 20120528) [ 1.053245] can: broadcast manager protocol (rev 20120528 t) [ 1.053252] can: netlink gateway (rev 20130117) max_hops=1 [ 1.053493] Bluetooth: RFCOMM socket layer initialized [ 1.053508] Bluetooth: RFCOMM ver 1.11 [ 1.053516] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.053525] Bluetooth: HIDP socket layer initialized [ 1.053553] 8021q: 802.1Q VLAN Support v1.8 [ 1.053568] lib80211: common routines for IEEE802.11 drivers [ 1.053572] lib80211_crypt: registered algorithm 'NULL' [ 1.053579] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 1.053785] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 1.053816] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256 [ 1.053820] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 1.053824] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 1.053829] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ 1.053834] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ 1.053839] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ 1.053860] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ 1.053864] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0. [ 1.053871] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 1.053875] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 1.053881] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 1.053910] [BT_RFKILL]: Enter rfkill_rk_init [ 1.054120] [BT_RFKILL]: Enter rfkill_rk_probe [ 1.054136] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0) [ 1.054141] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83. [ 1.054146] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]' [ 1.054157] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ 1.054162] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9. [ 1.054172] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ 1.054176] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91. [ 1.054187] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0) [ 1.054191] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4. [ 1.054202] [RK808]: clkout2_prepare [ 1.054443] [BT_RFKILL]: init gpio [ 1.054470] [BT_RFKILL]: Request irq for bt wakeup host [ 1.054504] [BT_RFKILL]: ** disable irq [ 1.054511] [BT_RFKILL]: setup rfkill [ 1.054588] [BT_RFKILL]: bt_default device registered. [ 1.054629] Key type dns_resolver registered [ 1.054744] sensor_register_slave:mpu6880_gyro,id=50 [ 1.055301] Registered cp15_barrier emulation handler [ 1.055610] Registered setend emulation handler [ 1.056102] Loading compiled-in X.509 certificates [ 1.056160] zswap: loaded using pool lzo/zbud [ 1.056830] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree [ 1.057579] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree [ 1.057603] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ 1.057777] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply from device tree [ 1.057799] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ 1.057833] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS supply regulator [ 1.059653] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree [ 1.059677] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed [ 1.059879] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree [ 1.059901] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed [ 1.060307] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree [ 1.060622] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree [ 1.060721] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree [ 1.060828] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree [ 1.060926] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree [ 1.061228] universal-charger usb-charger: GPIO lookup for consumer dc-det [ 1.061247] universal-charger usb-charger: using device tree for GPIO lookup [ 1.061266] of_get_named_gpiod_flags: can't parse 'dc-det-gpios' property of node '/usb-charger[0]' [ 1.061284] of_get_named_gpiod_flags: can't parse 'dc-det-gpio' property of node '/usb-charger[0]' [ 1.061301] universal-charger usb-charger: using lookup tables for GPIO lookup [ 1.061318] universal-charger usb-charger: lookup for GPIO dc-det failed [ 1.061335] universal-charger usb-charger: invalid dc det gpio! [ 1.063175] pwm-backlight edp-backlight: GPIO lookup for consumer enable [ 1.063198] pwm-backlight edp-backlight: using device tree for GPIO lookup [ 1.063219] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-backlight[0]' [ 1.063237] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-backlight[0]' [ 1.063254] pwm-backlight edp-backlight: using lookup tables for GPIO lookup [ 1.063271] pwm-backlight edp-backlight: lookup for GPIO enable failed [ 1.063293] pwm-backlight edp-backlight: Looking up power-supply from device tree [ 1.064556] rockchip-drm display-subsystem: defer getting devfreq [ 1.065667] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8009075780) [ 1.066149] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8009075780) [ 1.066356] rockchip-drm display-subsystem: failed to bind ff970000.edp (ops 0xffffff800906c3c0): -517 [ 1.066846] rockchip-drm display-subsystem: master bind failed: -517 [ 1.068040] panel-simple edp-panel: Looking up power-supply from device tree [ 1.068202] panel-simple edp-panel: GPIO lookup for consumer enable [ 1.068221] panel-simple edp-panel: using device tree for GPIO lookup [ 1.068284] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/edp-panel[0]' - status (0) [ 1.068314] no flags found for enable [ 1.068333] panel-simple edp-panel: GPIO lookup for consumer reset [ 1.068349] panel-simple edp-panel: using device tree for GPIO lookup [ 1.068367] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/edp-panel[0]' [ 1.068384] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/edp-panel[0]' [ 1.068401] panel-simple edp-panel: using lookup tables for GPIO lookup [ 1.068418] panel-simple edp-panel: lookup for GPIO reset failed [ 1.074221] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.074572] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 1.074701] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 1.074731] xhci-hcd xhci-hcd.2.auto: irq 225, io mem 0xfe800000 [ 1.074848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.074854] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.074859] usb usb3: Product: xHCI Host Controller [ 1.074863] usb usb3: Manufacturer: Linux 4.4.205 xhci-hcd [ 1.074868] usb usb3: SerialNumber: xhci-hcd.2.auto [ 1.075160] hub 3-0:1.0: USB hub found [ 1.075177] hub 3-0:1.0: 1 port detected [ 1.075326] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.075393] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 1.075425] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.075466] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.075471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.075476] usb usb4: Product: xHCI Host Controller [ 1.075479] usb usb4: Manufacturer: Linux 4.4.205 xhci-hcd [ 1.075484] usb usb4: SerialNumber: xhci-hcd.2.auto [ 1.075675] hub 4-0:1.0: USB hub found [ 1.075689] hub 4-0:1.0: 1 port detected [ 1.076371] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 1.076385] usb usb4: USB disconnect, device number 1 [ 1.076683] xhci-hcd xhci-hcd.2.auto: USB bus 4 deregistered [ 1.076766] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 1.076778] usb usb3: USB disconnect, device number 1 [ 1.092980] xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds. [ 1.092987] xhci-hcd xhci-hcd.2.auto: Host controller not halted, aborting reset. [ 1.093122] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered [ 1.094414] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 1.094506] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 [ 1.094617] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 1.094647] xhci-hcd xhci-hcd.3.auto: irq 226, io mem 0xfe900000 [ 1.094753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.094758] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.094762] usb usb3: Product: xHCI Host Controller [ 1.094767] usb usb3: Manufacturer: Linux 4.4.205 xhci-hcd [ 1.094771] usb usb3: SerialNumber: xhci-hcd.3.auto [ 1.094984] hub 3-0:1.0: USB hub found [ 1.094999] hub 3-0:1.0: 1 port detected [ 1.095148] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 1.095213] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 [ 1.095246] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.095288] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.095293] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.095297] usb usb4: Product: xHCI Host Controller [ 1.095301] usb usb4: Manufacturer: Linux 4.4.205 xhci-hcd [ 1.095305] usb usb4: SerialNumber: xhci-hcd.3.auto [ 1.095350] mmc1: new HS200 MMC card at address 0001 [ 1.095563] hub 4-0:1.0: USB hub found [ 1.095578] hub 4-0:1.0: 1 port detected [ 1.097065] mmcblk1: mmc1:0001 DA4128 116 GiB [ 1.097819] mmcblk1boot0: mmc1:0001 DA4128 partition 1 4.00 MiB [ 1.098095] ehci-platform fe380000.usb: EHCI Host Controller [ 1.098407] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 [ 1.098439] mmcblk1boot1: mmc1:0001 DA4128 partition 2 4.00 MiB [ 1.098615] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000 [ 1.099124] mmcblk1rpmb: mmc1:0001 DA4128 partition 3 16.0 MiB [ 1.100329] mmcblk1: p1 p2 [ 1.151426] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.157319] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 1.157856] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.157877] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.157894] usb usb5: Product: EHCI Host Controller [ 1.157911] usb usb5: Manufacturer: Linux 4.4.205 ehci_hcd [ 1.157927] usb usb5: SerialNumber: fe380000.usb [ 1.159051] hub 5-0:1.0: USB hub found [ 1.159228] hub 5-0:1.0: 1 port detected [ 1.160803] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 1.161150] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 [ 1.161323] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000 [ 1.216893] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.216934] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216960] usb usb6: Product: Generic Platform OHCI controller [ 1.216985] usb usb6: Manufacturer: Linux 4.4.205 ohci_hcd [ 1.217008] usb usb6: SerialNumber: fe3a0000.usb [ 1.218441] hub 6-0:1.0: USB hub found [ 1.218523] hub 6-0:1.0: 1 port detected [ 1.220492] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset [ 1.220520] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup [ 1.220594] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ 1.222967] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. [ 1.223040] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. [ 1.223075] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a [ 1.223187] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo [ 1.223248] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree [ 1.223518] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree [ 1.223777] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp [ 1.223803] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup [ 1.223833] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]' [ 1.223860] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]' [ 1.223885] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup [ 1.223910] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed [ 1.224121] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq [ 1.237287] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.250048] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized [ 1.250621] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.250946] rockchip-dmc dmc: Failed to get leakage [ 1.250980] rockchip-dmc dmc: Looking up center-supply from device tree [ 1.251019] vdd_center: could not add device link dmc err -17 [ 1.251037] vdd_center: Failed to create debugfs directory [ 1.251602] rockchip-dmc dmc: avs=0 [ 1.251655] rockchip-dmc dmc: failed to get vop pn to msch rl [ 1.251933] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 1.251962] rockchip-dmc dmc: could not find power_model node [ 1.252473] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/speaker-sound[0]' [ 1.252490] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/speaker-sound[0]' [ 1.303928] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.305630] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.307312] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.310307] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.314479] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 1.369538] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 1.380874] asoc-simple-card speaker-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [ 1.381098] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file [ 1.381119] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file [ 1.381147] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file [ 1.381165] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file [ 1.381190] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file [ 1.381205] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file [ 1.383023] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.383124] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.383144] usb 1-1: Product: USB2.0 Hub [ 1.384057] rockchip-drm display-subsystem: devfreq is ready [ 1.384873] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8009075780) [ 1.385127] hub 1-1:1.0: USB hub found [ 1.385211] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8009075780) [ 1.385405] rockchip-dp ff970000.edp: Looking up vcc-supply from device tree [ 1.385423] rockchip-dp ff970000.edp: Looking up vcc-supply property in node /edp@ff970000 failed [ 1.385472] rockchip-dp ff970000.edp: Looking up vccio-supply from device tree [ 1.385487] rockchip-dp ff970000.edp: Looking up vccio-supply property in node /edp@ff970000 failed [ 1.385613] rockchip-dp ff970000.edp: no DP phy configured [ 1.385635] hub 1-1:1.0: 4 ports detected [ 1.385674] rockchip-dp ff970000.edp: GPIO lookup for consumer hpd [ 1.385688] rockchip-dp ff970000.edp: using device tree for GPIO lookup [ 1.385705] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/edp@ff970000[0]' [ 1.385719] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/edp@ff970000[0]' [ 1.385732] rockchip-dp ff970000.edp: using lookup tables for GPIO lookup [ 1.385745] rockchip-dp ff970000.edp: lookup for GPIO hpd failed [ 1.386771] rockchip-drm display-subsystem: bound ff970000.edp (ops 0xffffff800906c3c0) [ 1.388003] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 1.388058] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff800906ad10) [ 1.388098] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.388109] [drm] No driver support for vblank timestamp query. [ 1.388358] rockchip-drm display-subsystem: failed to parse loader memory [ 1.393261] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 1.399882] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 1.399947] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 1.403714] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 14 [ 1.426785] rockchip-dp ff970000.edp: [drm:analogix_dp_link_start] Enable downspread on the sink [ 1.429822] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 1.431321] rockchip-dp ff970000.edp: Link Training success! [ 1.560787] vendor storage:20190527 ret = 0 [ 1.676452] Console: switching to colour frame buffer device 240x67 [ 1.730197] usb 6-1: new low-speed USB device number 2 using ohci-platform [ 1.753527] rockchip-drm display-subsystem: fb0: frame buffer device [ 1.756127] usb 1-1.2: new high-speed USB device number 3 using ehci-platform [ 1.761483] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok [ 1.761533] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: Failed to create Playback debugfs file [ 1.765470] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply from device tree [ 1.765507] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply property in node /power-management@ff310000/power-controller failed [ 1.765729] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r) [ 1.765754] ======== dhd_wlan_init_plat_data ======== [ 1.765771] dhd_wlan_init_gpio: WL_REG_ON=-1 [ 1.765786] dhd_wifi_platform_load: Enter [ 1.765824] Power-up adapter 'DHD generic adapter' [ 1.766611] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0) [ 1.766690] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid[0]' - status (0) [ 1.766821] gpio-5 (Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 1.766948] gpio-33 (Lid): gpiod_set_debounce: missing set() or set_debounce() operations [ 1.767402] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.767735] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply from device tree [ 1.767764] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply property in node /power-management@ff310000/power-controller failed [ 1.768597] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gmac-supply from device tree [ 1.768628] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gmac-supply property in node /power-management@ff310000/power-controller failed [ 1.768783] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply from device tree [ 1.768810] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@ff310000/power-controller failed [ 1.768951] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply from device tree [ 1.768979] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@ff310000/power-controller failed [ 1.769068] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply from device tree [ 1.769122] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply property in node /power-management@ff310000/power-controller failed [ 1.769301] rk808-rtc rk808-rtc: setting system clock to 2019-12-04 13:56:18 UTC (1575467778) [ 1.769436] of_cfs_init [ 1.769484] of_cfs_init: OK [ 1.785341] wifi_platform_set_power = 1 [ 1.785364] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 1.785380] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 1.785397] [WLAN_RFKILL]: wifi turn on power. -1 [ 1.902304] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply from device tree [ 1.902342] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply property in node /power-management@ff310000/power-controller failed [ 1.902474] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply from device tree [ 1.902499] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply property in node /power-management@ff310000/power-controller failed [ 1.902601] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply from device tree [ 1.902624] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply property in node /power-management@ff310000/power-controller failed [ 1.904160] ALSA device list: [ 1.904179] #0: es8316-spk-sound [ 1.904194] #1: rk-hdmi-dp-sound [ 1.904626] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 1.904780] md: Waiting for all devices to be available before autodetect [ 1.904797] md: If you don't use raid, use raid=noautodetect [ 1.906215] md: Autodetecting RAID arrays. [ 1.906235] md: Scanned 0 and added 0 devices. [ 1.906247] md: autorun ... [ 1.906260] md: ... autorun DONE. [ 1.939130] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.939207] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.940280] devtmpfs: mounted [ 1.941428] Freeing unused kernel memory: 1216K [ 1.982575] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321 [ 1.982609] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.982631] usb 1-1.2: Product: USB Camera [ 1.982652] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd. [ 1.986794] uvcvideo: Found UVC 1.00 device USB Camera (0c45:6321) [ 2.026604] usb 6-1: New USB device found, idVendor=258a, idProduct=001e [ 2.026630] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.026644] usb 6-1: Product: USB KEYBOARD [ 2.026657] usb 6-1: Manufacturer: HAILUCK CO.,LTD [ 2.035896] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:258A:001E.0001/input/input2 [ 2.067233] systemd[1]: Failed to insert module 'autofs4': No such file or directory [ 2.075790] random: systemd: uninitialized urandom read (16 bytes read, 46 bits of entropy available) [ 2.077143] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.077710] random: systemd: uninitialized urandom read (16 bytes read, 46 bits of entropy available) [ 2.079553] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.080295] systemd[1]: Detected architecture arm64. [ 2.080961] systemd[1]: Set hostname to . [ 2.086179] wifi_platform_bus_enumerate device present 1 [ 2.086206] ======== Card detection to detect SDIO card! ======== [ 2.086224] mmc2:mmc host rescan start! [ 2.087523] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0 [ 2.102337] bcmsdh_register: register client driver [ 2.110120] bcmsdh_sdmmc_probe: Enter num=1 [ 2.111815] bcmsdh_sdmmc_probe: Enter num=2 [ 2.111842] bus num (host idx)=2, slot num (rca)=1 [ 2.111860] found adapter info 'DHD generic adapter' [ 2.112012] sdioh_attach: set sd_f2_blocksize 256 [ 2.112172] sdioh_attach: sd clock rate = 0 [ 2.112814] dhdsdio_probe : no mutex held. set lock [ 2.113067] F1 signature read @0x18000000=0x15294345 [ 2.113284] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 49 bits of entropy available) [ 2.118949] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 50 bits of entropy available) [ 2.121677] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 2.124703] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 2.124896] dhd_conf_set_chiprev: chip=0x4345, chiprev=9 [ 2.125341] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ 2.125688] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.126185] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input3 [ 2.127380] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 52 bits of entropy available) [ 2.127728] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 52 bits of entropy available) [ 2.128202] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile [ 2.128577] wl_escan_attach: Enter [ 2.128634] wl_escan_init: Enter [ 2.128971] wl_create_event_handler(): thread:wl_escan_handler:b9 started [ 2.129157] tsk Enter, tsk = 0xffffffc0efc901b0 [ 2.129338] dhd_attach(): thread:dhd_watchdog_thread:ba started [ 2.129485] dhd_attach(): thread:dhd_dpc:bb started [ 2.129642] dhd_attach(): thread:dhd_rxf:bc started [ 2.129666] dhd_deferred_work_init: work queue initialized [ 2.129684] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2 [ 2.129737] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 2.130542] sdioh_cis_read: func_cis_ptr[0]=0x10ac [ 2.143505] Dongle Host Driver, version 1.579.77.41.10 (r) [ 2.144613] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 2.144639] Register interface [wlan0] MAC: 6c:21:a2:41:d9:44 [ 2.144769] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0 [ 2.144795] dhd_wl_ioctl: returning as busstate=0 [ 2.144813] dhd_dbg_detach_pkt_monitor, 2204 [ 2.144827] dhd_bus_devreset: == Power OFF == [ 2.145383] dhd_txglom_enable: enable 0 [ 2.145402] dhd_conf_set_txglom_params: txglom_mode=copy [ 2.145417] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0 [ 2.145432] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 2.145448] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 2.145463] dhd_bus_devreset: WLAN OFF DONE [ 2.145712] wifi_platform_set_power = 0 [ 2.145728] ======== PULL WL_REG_ON(-1) LOW! ======== [ 2.145744] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 2.145772] [WLAN_RFKILL]: wifi shut off power. [ 2.145787] dhdsdio_probe : the lock is released. [ 2.146016] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110 [ 2.146196] dhd_module_init: Exit err=0 [ 2.162242] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 2.163401] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 2.163995] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 2.165155] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 2.177858] hid-multitouch 0003:258A:001E.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1 [ 2.290611] systemd[1]: Configuration file /lib/systemd/system/partition-bootup.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 2.293338] systemd[1]: Configuration file /etc/systemd/system/rockpro-hciattach.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 2.309468] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.309725] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.309813] systemd[1]: Reached target Remote File Systems. [ 2.309987] systemd[1]: Listening on udev Kernel Socket. [ 2.310187] systemd[1]: Listening on udev Control Socket. [ 2.310679] systemd[1]: Created slice User and Session Slice. [ 2.310847] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.311238] systemd[1]: Created slice System Slice. [ 2.313058] systemd[1]: Mounting POSIX Message Queue File System... [ 2.315302] systemd[1]: Mounting Debug File System... [ 2.315501] systemd[1]: Reached target Slices. [ 2.316129] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported. [ 2.316443] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.319614] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.319806] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.322293] systemd[1]: Reached target Paths. [ 2.322443] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.324745] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 2.324910] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.326306] systemd[1]: Reached target User and Group Name Lookups. [ 2.326450] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.328699] systemd[1]: Listening on Journal Socket. [ 2.328970] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.334749] systemd[1]: Starting Load Kernel Modules... [ 2.335023] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 2.339690] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.344571] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.350392] systemd[1]: Starting Restore / save the current clock... [ 2.357501] systemd[1]: Listening on Syslog Socket. [ 2.361021] systemd[1]: Starting Journal Service... [ 2.363659] systemd[1]: Reached target Encrypted Volumes. [ 2.367221] systemd[1]: Created slice system-getty.slice. [ 2.373514] systemd[1]: Mounted Debug File System. [ 2.376419] systemd[1]: Mounted POSIX Message Queue File System. [ 2.380177] systemd[1]: Started Load Kernel Modules. [ 2.395685] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.399068] systemd[1]: Started Remount Root and Kernel File Systems. [ 2.402006] systemd[1]: Started Restore / save the current clock. [ 2.411888] systemd[1]: Starting Load/Save Random Seed... [ 2.416655] systemd[1]: Activating swap /swapfile... [ 2.424385] systemd[1]: Starting Rebuild Hardware Database... [ 2.430502] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.438261] systemd[1]: Mounting Configuration File System... [ 2.443574] systemd[1]: Starting Apply Kernel Variables... [ 2.449341] systemd[1]: Mounting FUSE Control File System... [ 2.455280] systemd[1]: Started Load/Save Random Seed. [ 2.458195] systemd[1]: Mounted Configuration File System. [ 2.465870] systemd[1]: Mounted FUSE Control File System. [ 2.472675] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.477963] systemd[1]: Starting udev Kernel Device Manager... [ 2.481416] systemd[1]: Reached target Local File Systems (Pre). [ 2.484413] systemd[1]: Reached target Local File Systems. [ 2.488301] systemd[1]: Starting Enable support for additional executable binary formats... [ 2.491143] systemd[1]: Started Apply Kernel Variables. [ 2.497545] systemd[1]: Starting Raise network interfaces... [ 2.510717] Adding 511996k swap on /swapfile. Priority:-1 extents:4 across:524284k SSFS [ 2.510906] systemd[1]: Activated swap /swapfile. [ 2.518296] systemd[1]: Reached target Swap. [ 2.527159] systemd[1]: Started Enable support for additional executable binary formats. [ 2.555910] systemd[1]: Started udev Kernel Device Manager. [ 2.645897] systemd[1]: Started Journal Service. [ 2.676112] systemd-journald[210]: Received request to flush runtime journal from PID 1 [ 2.713276] phy phy-ff770000.syscon:usb2-phy@e450.6: charger = USB_FLOATING_CHARGER [ 3.520190] [BT_RFKILL]: Enter rfkill_rk_set_power [ 3.520203] [BT_RFKILL]: Set blocked:1 [ 3.520209] [BT_RFKILL]: bt shut off power [ 3.549441] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree [ 3.549456] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed [ 3.549487] ff100000.saradc supply vref not found, using dummy regulator [ 3.643062] phy phy-pcie-phy.9: Looking up phy-supply from device tree [ 3.643095] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed [ 3.644886] mali ff9a0000.gpu: Looking up mali-supply from device tree [ 3.645815] mali ff9a0000.gpu: leakage=26 [ 3.645890] mali ff9a0000.gpu: Looking up mali-supply from device tree [ 3.645953] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep [ 3.645968] vdd_gpu: could not add device link ff9a0000.gpu err -17 [ 3.645971] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup [ 3.645995] vdd_gpu: Failed to create debugfs directory [ 3.646012] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0) [ 3.646424] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply from device tree [ 3.646446] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply property in node /pcie@f8000000 failed [ 3.646494] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 3.646506] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree [ 3.646519] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed [ 3.646540] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found [ 3.646557] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree [ 3.646571] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed [ 3.646590] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found [ 3.646601] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree [ 3.646614] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed [ 3.646634] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found [ 3.646646] rockchip-pcie f8000000.pcie: missing optional "memory-region" property [ 3.646658] rockchip-pcie f8000000.pcie: missing optional "rockchip,dma_trx_enabled" property [ 3.646670] rockchip-pcie f8000000.pcie: missing optional "rockchip,deferred" property [ 3.646693] rockchip-pcie f8000000.pcie: calling really probe [ 3.646704] rockchip-pcie f8000000.pcie: PCIe asserting reset [ 3.646744] rockchip-pcie f8000000.pcie: advertising gen2/1 training [ 3.646785] rockchip-pcie f8000000.pcie: PCIe reset released [ 3.653042] mali ff9a0000.gpu: avs=0 [ 3.657175] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 [ 3.658067] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ 3.658249] I : [File] : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; [Line] : 332; [Func] : kbase_devfreq_init(); success initing power_model_simple. [ 3.659505] mali ff9a0000.gpu: Probed as mali0 [ 3.889064] dhd_ioctl_entry: Interface is down [ 3.889094] Error getting the SSID [ 3.941227] dhd_open: Enter ffffffc0f1f5f000 [ 3.941239] dhd_open : no mutex held. set lock [ 3.941247] Dongle Host Driver, version 1.579.77.41.10 (r) [ 3.941253] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 3.941258] wl_android_wifi_on in 1 [ 3.941262] wl_android_wifi_on in 2: g_wifi_on=0 [ 3.941267] wifi_platform_set_power = 1 [ 3.941272] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 3.941277] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 3.941283] [WLAN_RFKILL]: wifi turn on power. -1 [ 4.008127] [BT_RFKILL]: Enter rfkill_rk_set_power [ 4.008150] [BT_RFKILL]: Set blocked:0 [ 4.008157] [BT_RFKILL]: Enter rfkill_rk_sleep_bt [ 4.008167] [BT_RFKILL]: *** bt sleep: 0 *** [ 4.023046] random: nonblocking pool is initialized [ 4.029149] [BT_RFKILL]: ENABLE UART_RTS [ 4.036336] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4.130176] [BT_RFKILL]: DISABLE UART_RTS [ 4.130219] [BT_RFKILL]: bt turn on power [ 4.148307] rockchip-pcie f8000000.pcie: PCIe link training gen1 timed out. [ 4.148350] rockchip-pcie f8000000.pcie: init port failed [ 4.148421] rockchip-pcie f8000000.pcie: probe init failed [ 4.148470] rockchip-pcie f8000000.pcie: PCIe probe failed. [ 4.148927] rockchip-pcie: probe of f8000000.pcie failed with error -110 [ 4.242253] sdio_reset_comm(): [ 4.270224] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 4.285982] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 4.362000] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.368773] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.375317] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.387635] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.539549] [BT_RFKILL]: Enter rfkill_rk_set_power [ 4.539558] [BT_RFKILL]: Set blocked:0 [ 4.539565] [BT_RFKILL]: Enter rfkill_rk_sleep_bt [ 4.539572] [BT_RFKILL]: *** bt sleep: 0 *** [ 4.539608] [BT_RFKILL]: ENABLE UART_RTS [ 4.628723] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 4.641104] [BT_RFKILL]: DISABLE UART_RTS [ 4.641150] [BT_RFKILL]: bt turn on power [ 4.655338] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 4.655443] sdioh_start: set sd_f2_blocksize 256 [ 4.656168] dhd_bus_devreset: == WLAN ON == [ 4.657939] F1 signature read @0x18000000=0x15294345 [ 4.664100] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 4.665605] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 4.665718] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 4.668506] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt [ 4.668541] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin [ 4.668550] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt [ 4.668559] Final clm_path=/lib/firmware/brcm/clm.blob [ 4.668567] Final conf_path=/lib/firmware/brcm/config.txt [ 4.670821] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success [ 4.746293] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success [ 4.747542] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ 4.748707] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 4.825077] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 4.825892] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ 4.825902] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ 4.827218] Disable tdls_auto_op failed. -1 [ 4.827234] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ 4.828602] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob [ 4.830757] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:44 [ 4.847330] Driver: 1.579.77.41.10 (r) Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 CLM: 9.2.9 [ 4.847934] dhd_txglom_enable: enable 1 [ 4.847944] dhd_conf_set_txglom_params: txglom_mode=copy [ 4.847953] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0 [ 4.847961] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 4.847969] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 4.847983] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 [ 4.851314] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 4.853982] dhd_pno_init: Support Android Location Service [ 4.874438] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 4.875363] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 4.875395] dhd_rtt_init : FTM is not supported [ 4.875408] dhd_preinit_ioctls: SensorHub diabled 0 [ 4.876327] dhd_preinit_ioctls failed to set ShubHub disable [ 4.879761] CFG80211-ERROR) wl_cfg80211_event : [ 4.879762] dhd_conf_set_country: set country CN, revision 38 [ 4.879790] Event handler is not created [ 4.883052] Country code: CN (CN/38) [ 4.887131] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23 [ 4.887673] wl_android_wifi_on: Success [ 4.927220] dhd_open : the lock is released. [ 4.927244] dhd_open: Exit ret=0 [ 5.595681] P2P interface registered [ 5.595708] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0efe4d800, wdev->net: (null) [ 5.606638] WLC_E_IF: NO_IF set, event Ignored [ 5.608068] P2P interface started [ 5.638848] wl_run_escan: LEGACY_SCAN sync ID: 0, bssidx: 0 [ 8.107578] wl_run_escan: LEGACY_SCAN sync ID: 1, bssidx: 0 [ 8.307151] serial8250_request_dma: 99 callbacks suppressed [ 8.307176] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.310758] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.315668] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.319744] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.323604] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.403484] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.422280] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.430604] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.435431] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 8.468637] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 13.429633] serial8250_request_dma: 12 callbacks suppressed [ 13.429652] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 13.429865] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 13.439548] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 13.441808] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 24.364899] wl_run_escan: LEGACY_SCAN sync ID: 2, bssidx: 0 [ 26.697728] Connecting with 1c:e6:c7:0d:c8:9d ssid "guest", len (5) channel=60 [ 26.697758] dhd_dbg_start_pkt_monitor, 1724 [ 26.753975] wl_iw_event: Link UP with 1c:e6:c7:0d:c8:9d [ 26.754021] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d [ 26.831835] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d vndr_oui: 00-40-96 [ 31.119456] wl_run_escan: LEGACY_SCAN sync ID: 3, bssidx: 0 [ 31.159473] [BT_RFKILL]: Enter rfkill_rk_set_power [ 31.159500] [BT_RFKILL]: Set blocked:0 [ 31.159511] [BT_RFKILL]: Enter rfkill_rk_sleep_bt [ 31.159524] [BT_RFKILL]: *** bt sleep: 0 *** [ 31.159593] [BT_RFKILL]: ENABLE UART_RTS [ 31.260263] [BT_RFKILL]: DISABLE UART_RTS [ 31.260357] [BT_RFKILL]: bt turn on power [ 39.302100] PM: suspend entry 2019-12-04 13:56:56.032801351 UTC [ 39.302122] PM: Syncing filesystems ... done. [ 39.317252] PM: Preparing system for sleep (mem) [ 39.317887] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 39.323127] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 39.325056] PM: Suspending system (mem) [ 39.325066] Suspending console(s) (use no_console_suspend to debug) [ 39.325512] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 39.325515] [BT_RFKILL]: Disable UART_RTS [ 39.325560] [BT_RFKILL]: enable irq for bt wakeup host [ 39.330943] bcmsdh_sdmmc_suspend Enter func->num=2 [ 39.330948] dhdsdio_suspend Enter [ 39.330956] bcmsdh_sdmmc_suspend Exit [ 39.330963] bcmsdh_sdmmc_suspend Enter func->num=1 [ 39.429958] [WLAN_RFKILL]: Enter rfkill_wlan_suspend [ 39.552066] rockchip-dmc dmc: failed to get dfi event [ 39.553368] PM: suspend of devices complete after 226.888 msecs [ 39.555968] LDO_REG2: No configuration [ 39.562003] PM: late suspend of devices complete after 3.002 msecs [ 39.564504] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply from device tree [ 39.564520] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply property in node /power-management@ff310000/power-controller failed [ 39.564581] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopb-supply from device tree [ 39.564591] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopb-supply property in node /power-management@ff310000/power-controller failed [ 39.564634] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vo-supply from device tree [ 39.564643] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vo-supply property in node /power-management@ff310000/power-controller failed [ 39.564742] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vio-supply from device tree [ 39.564751] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vio-supply property in node /power-management@ff310000/power-controller failed [ 39.564960] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sd-supply from device tree [ 39.564969] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sd-supply property in node /power-management@ff310000/power-controller failed [ 39.565140] PM: noirq suspend of devices complete after 3.128 msecs [ 39.565145] Disabling non-boot CPUs ... [ 39.566766] CPU1: shutdown [ 39.577224] psci: Retrying again to check for CPU kill [ 39.577228] psci: CPU1 killed. [ 39.585609] CPU2: shutdown [ 39.596191] psci: Retrying again to check for CPU kill [ 39.596196] psci: CPU2 killed. [ 39.604013] CPU3: shutdown [ 39.614183] psci: Retrying again to check for CPU kill [ 39.614188] psci: CPU3 killed. [ 39.621522] CPU4: shutdown [ 39.632187] psci: Retrying again to check for CPU kill [ 39.632191] psci: CPU4 killed. [ 39.639056] CPU5: shutdown [ 39.649189] psci: Retrying again to check for CPU kill [ 39.649194] psci: CPU5 killed. [ 39.654722] Enabling non-boot CPUs ... [ 39.658259] Detected VIPT I-cache on CPU1 [ 39.658293] CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 39.658351] CPU1: update cpu_capacity 401 [ 39.658355] CPU1: Booted secondary processor [410fd034] [ 39.658905] CPU1 is up [ 39.664286] Detected VIPT I-cache on CPU2 [ 39.664308] CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 39.664349] CPU2: update cpu_capacity 401 [ 39.664353] CPU2: Booted secondary processor [410fd034] [ 39.664920] CPU2 is up [ 39.670502] Detected VIPT I-cache on CPU3 [ 39.670524] CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 39.670564] CPU3: update cpu_capacity 401 [ 39.670568] CPU3: Booted secondary processor [410fd034] [ 39.671358] CPU3 is up [ 39.679745] Detected PIPT I-cache on CPU4 [ 39.679776] CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 39.679842] CPU4: update cpu_capacity 1024 [ 39.679846] CPU4: Booted secondary processor [410fd082] [ 39.681354] cpu cpu4: Looking up cpu-supply from device tree [ 39.682279] cpu cpu4: avs=0 [ 39.682427] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ 39.682450] cpu cpu4: failed to read out thermal zone (-11) [ 39.682951] cpu cpu4: failed to find power_model node [ 39.683209] CPU4 is up [ 39.692062] Detected PIPT I-cache on CPU5 [ 39.692083] CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 39.692125] CPU5: update cpu_capacity 1024 [ 39.692128] CPU5: Booted secondary processor [410fd082] [ 39.694310] CPU5 is up [ 39.697518] PM: noirq resume of devices complete after 2.279 msecs [ 39.699789] PM: early resume of devices complete after 1.745 msecs [ 39.722741] dw-apb-uart ff180000.serial: got rx and tx dma channels [ 39.722894] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 39.724367] rockchip-dmc dmc: failed to get dfi event [ 39.724393] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p0, type: 14 [ 39.747746] rockchip-dp ff970000.edp: [drm:analogix_dp_link_start] Enable downspread on the sink [ 39.750864] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 39.752343] rockchip-dp ff970000.edp: Link Training success! [ 39.910517] [WLAN_RFKILL]: Enter rfkill_wlan_resume [ 39.913422] Suspended for 12.357 seconds [ 39.935598] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 39.935751] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 39.935807] bcmsdh_sdmmc_resume Enter func->num=1 [ 39.935813] bcmsdh_sdmmc_resume Enter func->num=2 [ 39.935818] dhdsdio_resume Enter [ 39.935822] bcmsdh_sdmmc_resume Exit [ 40.085829] PM: resume of devices complete after 385.946 msecs [ 40.092102] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 40.092106] [BT_RFKILL]: ** disable irq [ 40.092133] [BT_RFKILL]: Enable UART_RTS [ 40.092966] PM: Finishing wakeup. [ 40.092974] Restarting tasks ... [ 40.093411] usb 6-1: USB disconnect, device number 2 [ 40.098798] usb 1-1.2: USB disconnect, device number 3 [ 40.128814] done. [ 40.129022] PM: suspend exit 2019-12-04 13:57:09.217187322 UTC [ 40.198498] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 40.198526] dhd_dbg_stop_pkt_monitor, 1963 [ 40.200172] wl_iw_event: Link Down with 1c:e6:c7:0d:c8:9d, reason=2 [ 40.200352] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 40.200412] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:e6:c7:0d:c8:9d [ 40.200430] dhd_dbg_stop_pkt_monitor, 1963 [ 40.201630] CFG80211-ERROR) wl_cfg80211_tdls_config : No change in tdls state. Do nothing. tdls_enable:1 [ 40.270273] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 40.388296] usb 6-1: new low-speed USB device number 3 using ohci-platform [ 40.438523] dhd_stop: Enter ffffffc0f1f5f000 [ 40.447330] WLC_E_IF: NO_IF set, event Ignored [ 40.447363] CFG80211-ERROR) wl_cfgp2p_down : Clean up the p2p discovery IF [ 40.447373] wl_cfgp2p_del_p2p_disc_if: wdev: ffffffc0efe4d800, wdev->net: (null) [ 40.447409] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized [ 40.447417] Exit. P2P interface stopped [ 40.456201] P2P interface unregistered [ 40.456230] CFGP2P-ERROR) wl_cfgp2p_deinit_priv : In [ 40.458448] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0 [ 40.458462] wl_android_wifi_off in 1 [ 40.458469] wl_android_wifi_off in 2: g_wifi_on=1, on_failure=1 [ 40.458718] dhd_dbg_detach_pkt_monitor, 2204 [ 40.458726] dhd_bus_devreset: == Power OFF == [ 40.458831] dhd_txglom_enable: enable 0 [ 40.458839] dhd_conf_set_txglom_params: txglom_mode=copy [ 40.458845] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0 [ 40.458851] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 40.458858] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 40.458864] dhd_bus_devreset: WLAN OFF DONE [ 40.458935] wifi_platform_set_power = 0 [ 40.458942] ======== PULL WL_REG_ON(-1) LOW! ======== [ 40.458951] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 40.458971] [WLAN_RFKILL]: wifi shut off power. [ 40.458977] wl_android_wifi_off out [ 40.458984] wl_ext_iapsta_dettach_netdev: ifidx=0 [ 40.459015] dhd_stop: Exit [ 40.495996] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321 [ 40.496029] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 40.496048] usb 1-1.2: Product: USB Camera [ 40.496065] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd. [ 40.500668] uvcvideo: Found UVC 1.00 device USB Camera (0c45:6321) [ 40.664725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.664952] dhd_open: Enter ffffffc0f1f5f000 [ 40.664962] dhd_open : no mutex held. set lock [ 40.664978] Dongle Host Driver, version 1.579.77.41.10 (r) [ 40.664987] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 40.664994] wl_android_wifi_on in 1 [ 40.665001] wl_android_wifi_on in 2: g_wifi_on=0 [ 40.665007] wifi_platform_set_power = 1 [ 40.665014] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 40.665021] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 40.665028] [WLAN_RFKILL]: wifi turn on power. -1 [ 40.687496] usb 6-1: New USB device found, idVendor=258a, idProduct=001e [ 40.687508] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 40.687514] usb 6-1: Product: USB KEYBOARD [ 40.687519] usb 6-1: Manufacturer: HAILUCK CO.,LTD [ 40.696021] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:258A:001E.0003/input/input5 [ 40.746527] hid-generic 0003:258A:001E.0003: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0 [ 40.781710] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0004/input/input6 [ 40.832606] hid-multitouch 0003:258A:001E.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1 [ 40.965405] sdio_reset_comm(): [ 40.993421] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 41.010764] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 41.067208] sdio_read_cis: 1 callbacks suppressed [ 41.067234] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 41.073503] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 41.079740] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 41.090841] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 41.104095] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 41.325795] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 41.336228] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 41.336289] sdioh_start: set sd_f2_blocksize 256 [ 41.336613] dhd_bus_devreset: == WLAN ON == [ 41.336711] F1 signature read @0x18000000=0x15294345 [ 41.341591] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 41.342493] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 41.342564] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 41.342745] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt [ 41.342772] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin [ 41.342781] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt [ 41.342789] Final clm_path=/lib/firmware/brcm/clm.blob [ 41.342797] Final conf_path=/lib/firmware/brcm/config.txt [ 41.344881] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success [ 41.387216] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success [ 41.387252] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ 41.387594] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 41.462778] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 41.463622] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ 41.463637] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ 41.474553] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ 41.476182] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob [ 41.480679] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:44 [ 41.496682] Driver: 1.579.77.41.10 (r) Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 CLM: 9.2.9 [ 41.497052] dhd_txglom_enable: enable 1 [ 41.497076] dhd_conf_set_txglom_params: txglom_mode=copy [ 41.497085] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0 [ 41.497094] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 41.497102] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 41.497175] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 [ 41.500054] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 41.502477] dhd_pno_init: Support Android Location Service [ 41.522504] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 41.523515] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 41.523529] dhd_rtt_init : FTM is not supported [ 41.523539] dhd_preinit_ioctls: SensorHub diabled 0 [ 41.524466] dhd_preinit_ioctls failed to set ShubHub disable [ 41.527463] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 41.527595] dhd_conf_set_country: set country CN, revision 38 [ 41.530658] Country code: CN (CN/38) [ 41.534065] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23 [ 41.534883] wl_android_wifi_on: Success [ 41.567110] dhd_open : the lock is released. [ 41.567165] dhd_open: Exit ret=0 [ 41.648663] P2P interface registered [ 41.648690] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0f1233c00, wdev->net: (null) [ 41.663010] WLC_E_IF: NO_IF set, event Ignored [ 41.664768] P2P interface started [ 41.693279] wl_run_escan: LEGACY_SCAN sync ID: 4, bssidx: 0 [ 44.147804] wl_run_escan: LEGACY_SCAN sync ID: 5, bssidx: 0 [ 46.544701] Connecting with 1c:e6:c7:0d:c8:9d ssid "guest", len (5) channel=60 [ 46.544740] dhd_dbg_start_pkt_monitor, 1724 [ 46.592408] wl_iw_event: Link UP with 1c:e6:c7:0d:c8:9d [ 46.592589] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d [ 46.657344] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d vndr_oui: 00-40-96 [ 47.012236] PM: suspend entry 2019-12-04 13:57:16.100363776 UTC [ 47.012276] PM: Syncing filesystems ... done. [ 47.027757] PM: Preparing system for sleep (mem) [ 47.028487] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 47.034490] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 47.036507] PM: Suspending system (mem) [ 47.036516] Suspending console(s) (use no_console_suspend to debug) [ 47.036739] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 47.036741] [BT_RFKILL]: Disable UART_RTS [ 47.036793] [BT_RFKILL]: enable irq for bt wakeup host [ 47.040812] bcmsdh_sdmmc_suspend Enter func->num=2 [ 47.040817] dhdsdio_suspend Enter [ 47.090257] bcmsdh_sdmmc_suspend bcmsdh_suspend err=-16 [ 47.090279] dpm_run_callback(): pm_generic_suspend+0x0/0x4c returns -16 [ 47.090290] PM: Device mmc2:0001:2 failed to suspend: error -16 [ 47.090297] PM: Some devices failed to suspend, or early wake event detected [ 47.147953] PM: resume of devices complete after 57.638 msecs [ 47.153434] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 47.153438] [BT_RFKILL]: ** disable irq [ 47.153447] [BT_RFKILL]: Enable UART_RTS [ 47.153988] PM: Finishing wakeup. [ 47.153997] Restarting tasks ... done. [ 47.163370] PM: suspend exit 2019-12-04 13:57:16.251508291 UTC [ 47.163582] PM: suspend entry 2019-12-04 13:57:16.251727624 UTC [ 47.163593] PM: Syncing filesystems ... done. [ 47.172118] PM: Preparing system for sleep (freeze) [ 47.172964] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 47.179674] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 47.181870] PM: Suspending system (freeze) [ 47.181882] Suspending console(s) (use no_console_suspend to debug) [ 47.182184] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 47.182186] [BT_RFKILL]: Disable UART_RTS [ 47.182246] [BT_RFKILL]: enable irq for bt wakeup host [ 47.185998] bcmsdh_sdmmc_suspend Enter func->num=2 [ 47.186003] dhdsdio_suspend Enter [ 47.186013] bcmsdh_sdmmc_suspend Exit [ 47.186020] bcmsdh_sdmmc_suspend Enter func->num=1 [ 47.286385] [WLAN_RFKILL]: Enter rfkill_wlan_suspend [ 47.327342] dhd_start_xmit: bus is in suspend(3) or suspending(0x1) state!! [ 47.411315] rockchip-dmc dmc: failed to get dfi event [ 47.412412] PM: suspend of devices complete after 229.350 msecs [ 47.415495] PM: late suspend of devices complete after 3.071 msecs [ 47.418527] PM: noirq suspend of devices complete after 3.020 msecs [ 47.418542] PM: suspend-to-idle [ 47.527372] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 47.651355] dhd_start_xmit: bus is in suspend(3) or suspending(0x5) state!! [ 47.728373] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 47.929373] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 48.133374] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 48.329500] dhd_start_xmit: bus is in suspend(3) or suspending(0x5) state!! [ 48.334373] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 48.535375] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 48.688369] dhd_start_xmit: bus is in suspend(3) or suspending(0x5) state!! [ 48.735374] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 48.936390] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 49.137375] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 49.333624] PM: resume from suspend-to-idle [ 49.335980] PM: noirq resume of devices complete after 2.321 msecs [ 49.337161] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 49.338564] PM: early resume of devices complete after 2.249 msecs [ 49.362500] dw-apb-uart ff180000.serial: got rx and tx dma channels [ 49.362633] dw-apb-uart ff1a0000.serial: got rx and tx dma channels [ 49.364215] rockchip-dmc dmc: failed to get dfi event [ 49.364249] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p0, type: 14 [ 49.387845] rockchip-dp ff970000.edp: [drm:analogix_dp_link_start] Enable downspread on the sink [ 49.390921] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 49.392603] rockchip-dp ff970000.edp: Link Training success! [ 49.538157] sdioh_request_byte[846]: mmc is still in suspend state!!! [ 49.550115] [WLAN_RFKILL]: Enter rfkill_wlan_resume [ 49.551978] Suspended for 0.360 seconds [ 49.552406] usb usb3: root hub lost power or was reset [ 49.552414] usb usb4: root hub lost power or was reset [ 49.574375] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 49.574492] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 49.574541] bcmsdh_sdmmc_resume Enter func->num=1 [ 49.574547] bcmsdh_sdmmc_resume Enter func->num=2 [ 49.574551] dhdsdio_resume Enter [ 49.574555] bcmsdh_sdmmc_resume Exit [ 49.724784] PM: resume of devices complete after 386.202 msecs [ 49.731194] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 49.731198] [BT_RFKILL]: ** disable irq [ 49.731207] [BT_RFKILL]: Enable UART_RTS [ 49.731906] PM: Finishing wakeup. [ 49.731914] Restarting tasks ... [ 49.732404] usb 6-1: USB disconnect, device number 3 [ 49.733191] usb 1-1.2: USB disconnect, device number 4 [ 49.744524] done. [ 49.762498] PM: suspend exit 2019-12-04 13:57:19.211514505 UTC [ 49.858230] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 49.858276] dhd_dbg_stop_pkt_monitor, 1963 [ 49.860839] wl_iw_event: Link Down with 1c:e6:c7:0d:c8:9d, reason=2 [ 49.861003] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 49.861068] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:e6:c7:0d:c8:9d [ 49.861087] dhd_dbg_stop_pkt_monitor, 1963 [ 49.863109] CFG80211-ERROR) wl_cfg80211_tdls_config : No change in tdls state. Do nothing. tdls_enable:1 [ 49.898290] usb 1-1.2: new high-speed USB device number 5 using ehci-platform [ 50.005194] usb 6-1: new low-speed USB device number 4 using ohci-platform [ 50.064856] dhd_stop: Enter ffffffc0f1f5f000 [ 50.076055] WLC_E_IF: NO_IF set, event Ignored [ 50.076087] CFG80211-ERROR) wl_cfgp2p_down : Clean up the p2p discovery IF [ 50.076115] wl_cfgp2p_del_p2p_disc_if: wdev: ffffffc0f1233c00, wdev->net: (null) [ 50.076334] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized [ 50.076358] Exit. P2P interface stopped [ 50.084370] P2P interface unregistered [ 50.084413] CFGP2P-ERROR) wl_cfgp2p_deinit_priv : In [ 50.086591] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0 [ 50.086623] wl_android_wifi_off in 1 [ 50.086643] wl_android_wifi_off in 2: g_wifi_on=1, on_failure=1 [ 50.087350] dhd_dbg_detach_pkt_monitor, 2204 [ 50.087369] dhd_bus_devreset: == Power OFF == [ 50.087838] dhd_txglom_enable: enable 0 [ 50.087856] dhd_conf_set_txglom_params: txglom_mode=copy [ 50.087872] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0 [ 50.087888] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 50.087904] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 50.087919] dhd_bus_devreset: WLAN OFF DONE [ 50.088546] wifi_platform_set_power = 0 [ 50.088565] ======== PULL WL_REG_ON(-1) LOW! ======== [ 50.088587] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 50.088616] [WLAN_RFKILL]: wifi shut off power. [ 50.088630] wl_android_wifi_off out [ 50.088646] wl_ext_iapsta_dettach_netdev: ifidx=0 [ 50.088702] dhd_stop: Exit [ 50.124473] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321 [ 50.124496] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 50.124505] usb 1-1.2: Product: USB Camera [ 50.124515] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd. [ 50.127913] uvcvideo: Found UVC 1.00 device USB Camera (0c45:6321) [ 50.216053] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 50.216776] dhd_open: Enter ffffffc0f1f5f000 [ 50.216787] dhd_open : no mutex held. set lock [ 50.216797] Dongle Host Driver, version 1.579.77.41.10 (r) [ 50.216804] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 50.216809] wl_android_wifi_on in 1 [ 50.216814] wl_android_wifi_on in 2: g_wifi_on=0 [ 50.216819] wifi_platform_set_power = 1 [ 50.216824] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 50.216829] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 50.216834] [WLAN_RFKILL]: wifi turn on power. -1 [ 50.304371] usb 6-1: New USB device found, idVendor=258a, idProduct=001e [ 50.304416] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 50.304442] usb 6-1: Product: USB KEYBOARD [ 50.304467] usb 6-1: Manufacturer: HAILUCK CO.,LTD [ 50.317732] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:258A:001E.0005/input/input8 [ 50.371962] hid-generic 0003:258A:001E.0005: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0 [ 50.412864] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0006/input/input9 [ 50.469269] hid-multitouch 0003:258A:001E.0006: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1 [ 50.517159] sdio_reset_comm(): [ 50.544211] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 50.560440] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 50.631349] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 50.637591] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 50.643681] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 50.654587] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 50.667787] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 50.877384] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 50.902171] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 50.902252] sdioh_start: set sd_f2_blocksize 256 [ 50.902687] dhd_bus_devreset: == WLAN ON == [ 50.902813] F1 signature read @0x18000000=0x15294345 [ 50.906630] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 50.908832] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 50.908928] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 50.909293] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt [ 50.909334] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin [ 50.909362] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt [ 50.909374] Final clm_path=/lib/firmware/brcm/clm.blob [ 50.909385] Final conf_path=/lib/firmware/brcm/config.txt [ 50.910032] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success [ 50.956879] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success [ 50.956915] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ 50.957327] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 51.032557] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 51.033080] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ 51.033090] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ 51.038760] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ 51.039455] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob [ 51.041578] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:44 [ 51.056839] Driver: 1.579.77.41.10 (r) Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 CLM: 9.2.9 [ 51.057702] dhd_txglom_enable: enable 1 [ 51.057715] dhd_conf_set_txglom_params: txglom_mode=copy [ 51.057721] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0 [ 51.057727] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 51.057733] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 51.057744] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 [ 51.059850] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 51.061993] dhd_pno_init: Support Android Location Service [ 51.081796] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 51.082626] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 51.082638] dhd_rtt_init : FTM is not supported [ 51.082646] dhd_preinit_ioctls: SensorHub diabled 0 [ 51.083891] dhd_preinit_ioctls failed to set ShubHub disable [ 51.086507] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 51.086523] dhd_conf_set_country: set country CN, revision 38 [ 51.089390] Country code: CN (CN/38) [ 51.092509] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23 [ 51.092854] wl_android_wifi_on: Success [ 51.121202] dhd_open : the lock is released. [ 51.121217] dhd_open: Exit ret=0 [ 51.209291] P2P interface registered [ 51.209314] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0f10e2c00, wdev->net: (null) [ 51.221595] WLC_E_IF: NO_IF set, event Ignored [ 51.223460] P2P interface started [ 51.248377] wl_run_escan: LEGACY_SCAN sync ID: 6, bssidx: 0 [ 53.622412] wl_run_escan: LEGACY_SCAN sync ID: 7, bssidx: 0 [ 55.940803] Connecting with 1c:e6:c7:0d:c8:9d ssid "guest", len (5) channel=60 [ 55.940838] dhd_dbg_start_pkt_monitor, 1724 [ 55.992882] wl_iw_event: Link UP with 1c:e6:c7:0d:c8:9d [ 55.993050] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d [ 56.057615] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d vndr_oui: 00-40-96 [ 76.436282] PM: suspend entry 2019-12-04 13:57:45.885220962 UTC [ 76.436309] PM: Syncing filesystems ... done. [ 76.453398] PM: Preparing system for sleep (mem) [ 76.454113] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 76.460888] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 76.463021] PM: Suspending system (mem) [ 76.463033] Suspending console(s) (use no_console_suspend to debug) [ 76.463331] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 76.463334] [BT_RFKILL]: Disable UART_RTS [ 76.463391] [BT_RFKILL]: enable irq for bt wakeup host [ 76.468682] bcmsdh_sdmmc_suspend Enter func->num=2 [ 76.468687] dhdsdio_suspend Enter [ 76.468696] bcmsdh_sdmmc_suspend Exit [ 76.468703] bcmsdh_sdmmc_suspend Enter func->num=1 [ 76.580146] xhci-hcd xhci-hcd.3.auto: WARN: xHC CMD_RUN timeout [ 76.580190] dpm_run_callback(): platform_pm_suspend+0x0/0x64 returns -110 [ 76.580197] PM: Device xhci-hcd.3.auto failed to suspend: error -110 [ 76.580204] PM: Some devices failed to suspend, or early wake event detected [ 76.603436] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 76.603555] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 76.603600] bcmsdh_sdmmc_resume Enter func->num=1 [ 76.603606] bcmsdh_sdmmc_resume Enter func->num=2 [ 76.603610] dhdsdio_resume Enter [ 76.603615] bcmsdh_sdmmc_resume Exit [ 76.709900] PM: resume of devices complete after 129.677 msecs [ 76.714112] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 76.714117] [BT_RFKILL]: ** disable irq [ 76.714130] [BT_RFKILL]: Enable UART_RTS [ 76.714928] PM: Finishing wakeup. [ 76.714941] Restarting tasks ... done. [ 76.726416] PM: suspend exit 2019-12-04 13:57:46.175351320 UTC [ 76.726721] PM: suspend entry 2019-12-04 13:57:46.175668069 UTC [ 76.726754] PM: Syncing filesystems ... done. [ 76.787466] PM: Preparing system for sleep (freeze) [ 76.788188] Freezing user space processes ... (elapsed 0.007 seconds) done. [ 76.795617] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 76.797870] PM: Suspending system (freeze) [ 76.797883] Suspending console(s) (use no_console_suspend to debug) [ 76.798160] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 76.798162] [BT_RFKILL]: Disable UART_RTS [ 76.798274] [BT_RFKILL]: enable irq for bt wakeup host [ 76.801809] bcmsdh_sdmmc_suspend Enter func->num=2 [ 76.801815] dhdsdio_suspend Enter [ 76.801824] bcmsdh_sdmmc_suspend Exit [ 76.801831] bcmsdh_sdmmc_suspend Enter func->num=1 [ 76.913900] xhci-hcd xhci-hcd.3.auto: WARN: xHC CMD_RUN timeout [ 76.913943] dpm_run_callback(): platform_pm_suspend+0x0/0x64 returns -110 [ 76.913951] PM: Device xhci-hcd.3.auto failed to suspend: error -110 [ 76.913957] PM: Some devices failed to suspend, or early wake event detected [ 76.937701] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 76.937841] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 76.937899] bcmsdh_sdmmc_resume Enter func->num=1 [ 76.937905] bcmsdh_sdmmc_resume Enter func->num=2 [ 76.937909] dhdsdio_resume Enter [ 76.937913] bcmsdh_sdmmc_resume Exit [ 77.044039] PM: resume of devices complete after 130.063 msecs [ 77.047243] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 77.047247] [BT_RFKILL]: ** disable irq [ 77.047257] [BT_RFKILL]: Enable UART_RTS [ 77.047893] PM: Finishing wakeup. [ 77.047902] Restarting tasks ... done. [ 77.056920] PM: suspend exit 2019-12-04 13:57:46.505863268 UTC [ 77.096533] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 77.096560] dhd_dbg_stop_pkt_monitor, 1963 [ 77.098763] wl_iw_event: Link Down with 1c:e6:c7:0d:c8:9d, reason=2 [ 77.098904] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 77.098955] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:e6:c7:0d:c8:9d [ 77.098975] dhd_dbg_stop_pkt_monitor, 1963 [ 77.100299] CFG80211-ERROR) wl_cfg80211_tdls_config : No change in tdls state. Do nothing. tdls_enable:1 [ 77.339851] dhd_stop: Enter ffffffc0f1f5f000 [ 77.348401] WLC_E_IF: NO_IF set, event Ignored [ 77.348430] CFG80211-ERROR) wl_cfgp2p_down : Clean up the p2p discovery IF [ 77.348458] wl_cfgp2p_del_p2p_disc_if: wdev: ffffffc0f10e2c00, wdev->net: (null) [ 77.348502] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized [ 77.348525] Exit. P2P interface stopped [ 77.356315] P2P interface unregistered [ 77.356356] CFGP2P-ERROR) wl_cfgp2p_deinit_priv : In [ 77.358535] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0 [ 77.358577] wl_android_wifi_off in 1 [ 77.358586] wl_android_wifi_off in 2: g_wifi_on=1, on_failure=1 [ 77.359065] dhd_dbg_detach_pkt_monitor, 2204 [ 77.359095] dhd_bus_devreset: == Power OFF == [ 77.359274] dhd_txglom_enable: enable 0 [ 77.359284] dhd_conf_set_txglom_params: txglom_mode=copy [ 77.359291] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0 [ 77.359298] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 77.359306] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 77.359313] dhd_bus_devreset: WLAN OFF DONE [ 77.359523] wifi_platform_set_power = 0 [ 77.359532] ======== PULL WL_REG_ON(-1) LOW! ======== [ 77.359541] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 77.359571] [WLAN_RFKILL]: wifi shut off power. [ 77.359578] wl_android_wifi_off out [ 77.359587] wl_ext_iapsta_dettach_netdev: ifidx=0 [ 77.359623] dhd_stop: Exit [ 77.474043] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 77.474416] dhd_open: Enter ffffffc0f1f5f000 [ 77.474432] dhd_open : no mutex held. set lock [ 77.474820] Dongle Host Driver, version 1.579.77.41.10 (r) [ 77.474837] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 77.474846] wl_android_wifi_on in 1 [ 77.474856] wl_android_wifi_on in 2: g_wifi_on=0 [ 77.474865] wifi_platform_set_power = 1 [ 77.474873] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 77.474883] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 77.474892] [WLAN_RFKILL]: wifi turn on power. -1 [ 77.775455] sdio_reset_comm(): [ 77.803621] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 77.819633] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 77.896080] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 77.902738] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 77.909357] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 77.921271] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 77.935420] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 78.161230] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 78.196274] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 78.196501] sdioh_start: set sd_f2_blocksize 256 [ 78.198021] dhd_bus_devreset: == WLAN ON == [ 78.198499] F1 signature read @0x18000000=0x15294345 [ 78.210252] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 78.211100] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 78.211183] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 78.211536] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt [ 78.211558] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin [ 78.211565] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt [ 78.211571] Final clm_path=/lib/firmware/brcm/clm.blob [ 78.211577] Final conf_path=/lib/firmware/brcm/config.txt [ 78.212186] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success [ 78.281095] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success [ 78.281137] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ 78.281935] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 78.358171] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 78.359365] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ 78.359382] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ 78.365223] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ 78.366011] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob [ 78.368694] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:44 [ 78.387301] Driver: 1.579.77.41.10 (r) Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 CLM: 9.2.9 [ 78.387859] dhd_txglom_enable: enable 1 [ 78.387868] dhd_conf_set_txglom_params: txglom_mode=copy [ 78.387876] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0 [ 78.387883] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 78.387890] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 78.387902] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 [ 78.389537] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 78.392011] dhd_pno_init: Support Android Location Service [ 78.412196] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 78.413610] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 78.413635] dhd_rtt_init : FTM is not supported [ 78.413649] dhd_preinit_ioctls: SensorHub diabled 0 [ 78.414668] dhd_preinit_ioctls failed to set ShubHub disable [ 78.418387] CFG80211-ERROR) wl_cfg80211_event : [ 78.418388] dhd_conf_set_country: set country CN, revision 38 [ 78.418419] Event handler is not created [ 78.421620] Country code: CN (CN/38) [ 78.425312] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23 [ 78.425913] wl_android_wifi_on: Success [ 78.464187] dhd_open : the lock is released. [ 78.464243] dhd_open: Exit ret=0 [ 78.541199] P2P interface registered [ 78.541244] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0de1de800, wdev->net: (null) [ 78.557200] WLC_E_IF: NO_IF set, event Ignored [ 78.558866] P2P interface started [ 78.599959] wl_run_escan: LEGACY_SCAN sync ID: 8, bssidx: 0 [ 81.057471] wl_run_escan: LEGACY_SCAN sync ID: 9, bssidx: 0 [ 83.389744] Connecting with 1c:e6:c7:0d:c8:9d ssid "guest", len (5) channel=60 [ 83.389788] dhd_dbg_start_pkt_monitor, 1724 [ 83.453659] wl_iw_event: Link UP with 1c:e6:c7:0d:c8:9d [ 83.453893] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d [ 83.528990] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d vndr_oui: 00-40-96 [ 92.330627] PM: suspend entry 2019-12-04 13:58:01.779519300 UTC [ 92.330656] PM: Syncing filesystems ... done. [ 92.348050] PM: Preparing system for sleep (mem) [ 92.348927] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 92.354324] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 92.356329] PM: Suspending system (mem) [ 92.356338] Suspending console(s) (use no_console_suspend to debug) [ 92.356565] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 92.356567] [BT_RFKILL]: Disable UART_RTS [ 92.356620] [BT_RFKILL]: enable irq for bt wakeup host [ 92.360508] bcmsdh_sdmmc_suspend Enter func->num=2 [ 92.360513] dhdsdio_suspend Enter [ 92.360523] bcmsdh_sdmmc_suspend Exit [ 92.360529] bcmsdh_sdmmc_suspend Enter func->num=1 [ 92.474016] xhci-hcd xhci-hcd.3.auto: WARN: xHC CMD_RUN timeout [ 92.474060] dpm_run_callback(): platform_pm_suspend+0x0/0x64 returns -110 [ 92.474067] PM: Device xhci-hcd.3.auto failed to suspend: error -110 [ 92.474074] PM: Some devices failed to suspend, or early wake event detected [ 92.497482] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 92.497601] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 92.497646] bcmsdh_sdmmc_resume Enter func->num=1 [ 92.497653] bcmsdh_sdmmc_resume Enter func->num=2 [ 92.497657] dhdsdio_resume Enter [ 92.497662] bcmsdh_sdmmc_resume Exit [ 92.603699] PM: resume of devices complete after 129.605 msecs [ 92.608006] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 92.608011] [BT_RFKILL]: ** disable irq [ 92.608023] [BT_RFKILL]: Enable UART_RTS [ 92.608866] PM: Finishing wakeup. [ 92.608879] Restarting tasks ... done. [ 92.626158] PM: suspend exit 2019-12-04 13:58:02.075044725 UTC [ 92.626791] PM: suspend entry 2019-12-04 13:58:02.075686390 UTC [ 92.626812] PM: Syncing filesystems ... done. [ 92.682618] PM: Preparing system for sleep (freeze) [ 92.683459] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 92.689906] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 92.691697] PM: Suspending system (freeze) [ 92.691708] Suspending console(s) (use no_console_suspend to debug) [ 92.691966] [BT_RFKILL]: Enter rfkill_rk_pm_prepare [ 92.691969] [BT_RFKILL]: Disable UART_RTS [ 92.692023] [BT_RFKILL]: enable irq for bt wakeup host [ 92.695626] bcmsdh_sdmmc_suspend Enter func->num=2 [ 92.695632] dhdsdio_suspend Enter [ 92.695640] bcmsdh_sdmmc_suspend Exit [ 92.695647] bcmsdh_sdmmc_suspend Enter func->num=1 [ 92.806944] xhci-hcd xhci-hcd.3.auto: WARN: xHC CMD_RUN timeout [ 92.807033] dpm_run_callback(): platform_pm_suspend+0x0/0x64 returns -110 [ 92.807056] PM: Device xhci-hcd.3.auto failed to suspend: error -110 [ 92.807063] PM: Some devices failed to suspend, or early wake event detected [ 92.830525] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 92.830672] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 92.830727] bcmsdh_sdmmc_resume Enter func->num=1 [ 92.830734] bcmsdh_sdmmc_resume Enter func->num=2 [ 92.830738] dhdsdio_resume Enter [ 92.830742] bcmsdh_sdmmc_resume Exit [ 92.937027] PM: resume of devices complete after 129.945 msecs [ 92.940261] [BT_RFKILL]: Enter rfkill_rk_pm_complete [ 92.940281] [BT_RFKILL]: ** disable irq [ 92.940291] [BT_RFKILL]: Enable UART_RTS [ 92.940841] PM: Finishing wakeup. [ 92.940849] Restarting tasks ... done. [ 92.957089] PM: suspend exit 2019-12-04 13:58:02.405984297 UTC [ 92.993196] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3 [ 92.993226] dhd_dbg_stop_pkt_monitor, 1963 [ 92.994921] wl_iw_event: Link Down with 1c:e6:c7:0d:c8:9d, reason=2 [ 92.995098] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK [ 92.995157] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:e6:c7:0d:c8:9d [ 92.995176] dhd_dbg_stop_pkt_monitor, 1963 [ 92.996883] CFG80211-ERROR) wl_cfg80211_tdls_config : No change in tdls state. Do nothing. tdls_enable:1 [ 93.238383] dhd_stop: Enter ffffffc0f1f5f000 [ 93.245447] WLC_E_IF: NO_IF set, event Ignored [ 93.245499] CFG80211-ERROR) wl_cfgp2p_down : Clean up the p2p discovery IF [ 93.245537] wl_cfgp2p_del_p2p_disc_if: wdev: ffffffc0de1de800, wdev->net: (null) [ 93.245618] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized [ 93.245636] Exit. P2P interface stopped [ 93.254325] P2P interface unregistered [ 93.254359] CFGP2P-ERROR) wl_cfgp2p_deinit_priv : In [ 93.256539] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0 [ 93.256566] wl_android_wifi_off in 1 [ 93.256573] wl_android_wifi_off in 2: g_wifi_on=1, on_failure=1 [ 93.257024] dhd_dbg_detach_pkt_monitor, 2204 [ 93.257038] dhd_bus_devreset: == Power OFF == [ 93.257415] dhd_txglom_enable: enable 0 [ 93.257427] dhd_conf_set_txglom_params: txglom_mode=copy [ 93.257434] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0 [ 93.257440] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 93.257447] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 93.257453] dhd_bus_devreset: WLAN OFF DONE [ 93.258352] wifi_platform_set_power = 0 [ 93.258393] ======== PULL WL_REG_ON(-1) LOW! ======== [ 93.258419] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 93.258480] [WLAN_RFKILL]: wifi shut off power. [ 93.258507] wl_android_wifi_off out [ 93.258524] wl_ext_iapsta_dettach_netdev: ifidx=0 [ 93.258613] dhd_stop: Exit [ 93.426174] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 93.426442] dhd_open: Enter ffffffc0f1f5f000 [ 93.426452] dhd_open : no mutex held. set lock [ 93.426468] Dongle Host Driver, version 1.579.77.41.10 (r) [ 93.426477] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0 [ 93.426488] wl_android_wifi_on in 1 [ 93.426494] wl_android_wifi_on in 2: g_wifi_on=0 [ 93.426510] wifi_platform_set_power = 1 [ 93.426544] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 93.426562] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 93.426591] [WLAN_RFKILL]: wifi turn on power. -1 [ 93.727569] sdio_reset_comm(): [ 93.756039] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 93.773272] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 93.835258] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 93.841831] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 93.848095] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 93.859586] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 93.874014] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 94.097102] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0) [ 94.122630] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0. [ 94.122768] sdioh_start: set sd_f2_blocksize 256 [ 94.123707] dhd_bus_devreset: == WLAN ON == [ 94.123965] F1 signature read @0x18000000=0x15294345 [ 94.130203] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ 94.131327] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 94.131431] dhd_bus_set_default_min_res_mask: Unhandled chip id [ 94.131758] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt [ 94.131781] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin [ 94.131789] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt [ 94.131796] Final clm_path=/lib/firmware/brcm/clm.blob [ 94.131803] Final conf_path=/lib/firmware/brcm/config.txt [ 94.132477] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success [ 94.201065] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success [ 94.201103] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ 94.201736] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 94.277700] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 94.278632] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ 94.278647] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ 94.287356] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ 94.287860] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob [ 94.290083] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:44 [ 94.306227] Driver: 1.579.77.41.10 (r) Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 CLM: 9.2.9 [ 94.306713] dhd_txglom_enable: enable 1 [ 94.306724] dhd_conf_set_txglom_params: txglom_mode=copy [ 94.306732] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0 [ 94.306739] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1 [ 94.306746] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300 [ 94.306758] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 [ 94.308218] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 94.310401] dhd_pno_init: Support Android Location Service [ 94.330352] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 94.331256] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 94.331301] dhd_rtt_init : FTM is not supported [ 94.331310] dhd_preinit_ioctls: SensorHub diabled 0 [ 94.332268] dhd_preinit_ioctls failed to set ShubHub disable [ 94.335564] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ 94.335583] dhd_conf_set_country: set country CN, revision 38 [ 94.338710] Country code: CN (CN/38) [ 94.342122] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23 [ 94.342695] wl_android_wifi_on: Success [ 94.376519] dhd_open : the lock is released. [ 94.376539] dhd_open: Exit ret=0 [ 94.449705] P2P interface registered [ 94.449750] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0f1230000, wdev->net: (null) [ 94.467557] WLC_E_IF: NO_IF set, event Ignored [ 94.469675] P2P interface started [ 94.497988] wl_run_escan: LEGACY_SCAN sync ID: 10, bssidx: 0 [ 96.937030] wl_run_escan: LEGACY_SCAN sync ID: 11, bssidx: 0 [ 99.287685] Connecting with 1c:e6:c7:0d:c8:9d ssid "guest", len (5) channel=60 [ 99.287717] dhd_dbg_start_pkt_monitor, 1724 [ 99.339620] wl_iw_event: Link UP with 1c:e6:c7:0d:c8:9d [ 99.339797] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d [ 99.404369] wl_bss_connect_done succeeded with 1c:e6:c7:0d:c8:9d vndr_oui: 00-40-96 [ 108.472974] Error getting the SSID [ 108.473004] Error getting the SSID [ 108.473024] Error getting the SSID [ 120.125417] wl_run_escan: LEGACY_SCAN sync ID: 12, bssidx: 0 [ 129.256297] Error getting the SSID [ 163.143169] wl_run_escan: LEGACY_SCAN sync ID: 13, bssidx: 0