[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.132-1075-rockchip-ayufan-ga83beded8524 (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Thu Jul 26 08:22:22 UTC 2018 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] On node 0 totalpages: 1015296 [ 0.000000] DMA zone: 15864 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1015296 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7eec000 s46248 r8192 d31576 u86016 [ 0.000000] pcpu-alloc: s46248 r8192 d31576 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a6:ce:b6:3b:a7:40 eth1addr= serial=6daf52a5106d602 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf7ea3000-0xf7ee3000] (0MB) mapped at [ffffffc0f7ea3000-ffffffc0f7ee2fff] [ 0.000000] Memory: 3962976K/4061184K available (11966K kernel code, 1706K rwdata, 4340K rodata, 1152K init, 770K bss, 98208K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) .init : 0xffffff8009080000 - 0xffffff80091a0000 ( 1152 KB) .text : 0xffffff8008080000 - 0xffffff8008c30000 ( 11968 KB) .rodata : 0xffffff8008c30000 - 0xffffff8009080000 ( 4416 KB) .data : 0xffffff80091a0000 - 0xffffff800934a808 ( 1707 KB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f2d00000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f2c90000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f2ca0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001948] Console: colour dummy device 80x25 [ 0.002373] console [tty0] enabled [ 0.002704] bootconsole [uart0] disabled [ 0.003107] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.003135] pid_max: default: 32768 minimum: 301 [ 0.003259] Security Framework initialized [ 0.003275] Yama: becoming mindful. [ 0.003307] AppArmor: AppArmor disabled by boot time parameter [ 0.003369] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003389] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004181] Initializing cgroup subsys io [ 0.004207] Initializing cgroup subsys memory [ 0.004247] Initializing cgroup subsys devices [ 0.004268] Initializing cgroup subsys freezer [ 0.004287] Initializing cgroup subsys net_cls [ 0.004305] Initializing cgroup subsys perf_event [ 0.004325] Initializing cgroup subsys net_prio [ 0.004347] Initializing cgroup subsys hugetlb [ 0.004364] Initializing cgroup subsys pids [ 0.004411] ftrace: allocating 44383 entries in 174 pages [ 0.118685] sched-energy: Sched-energy-costs installed from DT [ 0.118716] CPU0: update cpu_capacity 401 [ 0.118779] ASID allocator initialised with 32768 entries [ 0.122007] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.122481] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.123780] Detected VIPT I-cache on CPU1 [ 0.123811] CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.123841] CPU1: using LPI pending table @0x00000000f2f40000 [ 0.123885] CPU1: update cpu_capacity 401 [ 0.123889] CPU1: Booted secondary processor [410fd034] [ 0.124421] Detected VIPT I-cache on CPU2 [ 0.124442] CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.124469] CPU2: using LPI pending table @0x00000000f2f60000 [ 0.124497] CPU2: update cpu_capacity 401 [ 0.124501] CPU2: Booted secondary processor [410fd034] [ 0.125042] Detected VIPT I-cache on CPU3 [ 0.125062] CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.125090] CPU3: using LPI pending table @0x00000000f2fc0000 [ 0.125117] CPU3: update cpu_capacity 401 [ 0.125121] CPU3: Booted secondary processor [410fd034] [ 0.125637] Detected PIPT I-cache on CPU4 [ 0.125662] CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.125701] CPU4: using LPI pending table @0x00000000f2ff0000 [ 0.125740] CPU4: update cpu_capacity 1024 [ 0.125744] CPU4: Booted secondary processor [410fd082] [ 0.126300] Detected PIPT I-cache on CPU5 [ 0.126318] CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.126355] CPU5: using LPI pending table @0x00000000f2430000 [ 0.126383] CPU5: update cpu_capacity 1024 [ 0.126387] CPU5: Booted secondary processor [410fd082] [ 0.126474] Brought up 6 CPUs [ 0.127168] SMP: Total of 6 processors activated. [ 0.127200] CPU features: detected feature: GIC system register CPU interface [ 0.127238] CPU: All CPU(s) started at EL2 [ 0.127308] alternatives: patching kernel code [ 0.128799] devtmpfs: initialized [ 0.142742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.142799] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.143314] xor: measuring software checksum speed [ 0.152975] 8regs : 2876.000 MB/sec [ 0.163031] 8regs_prefetch: 2572.000 MB/sec [ 0.173088] 32regs : 3244.000 MB/sec [ 0.183145] 32regs_prefetch: 2856.000 MB/sec [ 0.183165] xor: using function: 32regs (3244.000 MB/sec) [ 0.183218] pinctrl core: initialized pinctrl subsystem [ 0.183465] regulator-dummy: no parameters [ 0.184669] Failed to find legacy iommu devices [ 0.185083] NET: Registered protocol family 16 [ 0.188707] cpuidle: using governor ladder [ 0.192719] cpuidle: using governor menu [ 0.193034] vdso: 2 pages (1 code @ ffffff8008c36000, 1 data @ ffffff80091a4000) [ 0.193087] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.193624] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.208152] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.208233] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.208307] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.208383] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ 0.208455] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4 [ 0.244560] raid6: int64x1 gen() 472 MB/s [ 0.261638] raid6: int64x1 xor() 408 MB/s [ 0.278750] raid6: int64x2 gen() 656 MB/s [ 0.295835] raid6: int64x2 xor() 595 MB/s [ 0.312910] raid6: int64x4 gen() 949 MB/s [ 0.330030] raid6: int64x4 xor() 671 MB/s [ 0.347133] raid6: int64x8 gen() 769 MB/s [ 0.364194] raid6: int64x8 xor() 628 MB/s [ 0.381338] raid6: neonx1 gen() 996 MB/s [ 0.398422] raid6: neonx1 xor() 677 MB/s [ 0.415486] raid6: neonx2 gen() 1328 MB/s [ 0.432594] raid6: neonx2 xor() 986 MB/s [ 0.449689] raid6: neonx4 gen() 1796 MB/s [ 0.466786] raid6: neonx4 xor() 1189 MB/s [ 0.483890] raid6: neonx8 gen() 1695 MB/s [ 0.500988] raid6: neonx8 xor() 1257 MB/s [ 0.501007] raid6: using algorithm neonx4 gen() 1796 MB/s [ 0.501026] raid6: .... xor() 1189 MB/s, rmw enabled [ 0.501044] raid6: using intx1 recovery algorithm [ 0.501942] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0) [ 0.501981] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0) [ 0.502228] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]' [ 0.502250] dc_12v: 12000 mV [ 0.502428] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV [ 0.502592] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0) [ 0.502643] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree [ 0.502682] vcc3v3_pcie: supplied by dc_12v [ 0.502706] dc_12v: could not add device link regulator.2 err -2 [ 0.502747] vcc3v3_pcie: 3300 mV [ 0.502903] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV [ 0.502955] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]' [ 0.502971] vcc1v8_s0: 1800 mV [ 0.503119] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV [ 0.503168] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]' [ 0.503198] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree [ 0.503232] vcc_sys: supplied by dc_12v [ 0.503254] dc_12v: could not add device link regulator.4 err -2 [ 0.503293] vcc_sys: 5000 mV [ 0.503441] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV [ 0.503490] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]' [ 0.503508] vcc_phy: no parameters [ 0.503663] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV [ 0.503714] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]' [ 0.503733] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree [ 0.503767] vcc3v3_sys: supplied by vcc_sys [ 0.503789] vcc_sys: could not add device link regulator.6 err -2 [ 0.503815] vcc3v3_sys: 3300 mV [ 0.503963] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV [ 0.504098] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0) [ 0.504139] vcc5v0_host: no parameters [ 0.504316] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV [ 0.504890] iommu: Adding device ff8f0000.vop to group 0 [ 0.504970] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found [ 0.504990] iommu: Removing device ff8f0000.vop from group 0 [ 0.505062] iommu: Adding device ff900000.vop to group 0 [ 0.506323] SCSI subsystem initialized [ 0.506496] libata version 3.00 loaded. [ 0.506674] usbcore: registered new interface driver usbfs [ 0.506729] usbcore: registered new interface driver hub [ 0.506826] usbcore: registered new device driver usb [ 0.506934] media: Linux media interface: v0.10 [ 0.506979] Linux video capture interface: v2.00 [ 0.507049] pps_core: LinuxPPS API ver. 1 registered [ 0.507069] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.507112] PTP clock support registered [ 0.508179] Advanced Linux Sound Architecture Driver Initialized. [ 0.508737] Bluetooth: Core ver 2.21 [ 0.508779] NET: Registered protocol family 31 [ 0.508798] Bluetooth: HCI device and connection manager initialized [ 0.508824] Bluetooth: HCI socket layer initialized [ 0.508847] Bluetooth: L2CAP socket layer initialized [ 0.508883] Bluetooth: SCO socket layer initialized [ 0.509280] NetLabel: Initializing [ 0.509300] NetLabel: domain hash size = 128 [ 0.509317] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.509367] NetLabel: unlabeled traffic allowed by default [ 0.510169] clocksource: Switched to clocksource arch_sys_counter [ 0.561798] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.562055] NET: Registered protocol family 2 [ 0.562540] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.562787] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.563564] TCP: Hash tables configured (established 32768 bind 32768) [ 0.563705] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.563865] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.564317] NET: Registered protocol family 1 [ 0.564624] RPC: Registered named UNIX socket transport module. [ 0.564645] RPC: Registered udp transport module. [ 0.564663] RPC: Registered tcp transport module. [ 0.564682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.564873] PCI: CLS 0 bytes, default 64 [ 0.565417] Trying to unpack rootfs image as initramfs... [ 0.822200] Freeing initrd memory: 4976K [ 0.822746] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.822863] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.824083] kvm [1]: 8-bit VMID [ 0.824103] kvm [1]: Hyp mode initialized successfully [ 0.824264] kvm [1]: interrupt-controller@fff20000 IRQ10 [ 0.824485] kvm [1]: timer IRQ12 [ 0.827551] audit: initializing netlink subsys (disabled) [ 0.827618] audit: type=2000 audit(0.750:1): initialized [ 0.828421] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.835690] VFS: Disk quotas dquot_6.6.0 [ 0.835883] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.837770] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.839054] NFS: Registering the id_resolver key type [ 0.839098] Key type id_resolver registered [ 0.839117] Key type id_legacy registered [ 0.839149] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.839839] fuse init (API version 7.23) [ 0.840593] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.846357] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 0.848046] Key type big_key registered [ 0.848109] TEE Core Framework initialization (ver 1:0.1) [ 0.848181] TEE armv7 Driver initialization [ 0.848604] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ 0.848629] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ 0.848849] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62) [ 0.852890] NET: Registered protocol family 38 [ 0.852932] Key type asymmetric registered [ 0.852954] Asymmetric key parser 'x509' registered [ 0.853146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.853342] io scheduler noop registered [ 0.853367] io scheduler deadline registered (default) [ 0.853420] io scheduler cfq registered [ 0.854457] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree [ 0.854469] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ 0.854744] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree [ 0.854755] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ 0.854768] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator [ 0.854934] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree [ 0.855015] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2 [ 0.856242] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree [ 0.856254] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed [ 0.857275] phy phy-ff800000.phy.3: Looking up phy-supply from device tree [ 0.857286] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed [ 0.857384] phy phy-ff800000.phy.4: Looking up phy-supply from device tree [ 0.857393] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed [ 0.860497] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.860538] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.862072] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.862108] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.863188] pwm-regulator vdd-log: GPIO lookup for consumer enable [ 0.863197] pwm-regulator vdd-log: using device tree for GPIO lookup [ 0.863208] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]' [ 0.863216] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]' [ 0.863224] pwm-regulator vdd-log: using lookup tables for GPIO lookup [ 0.863232] pwm-regulator vdd-log: lookup for GPIO enable failed [ 0.863257] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ 0.863318] pwm-regulator: supplied by vcc_sys [ 0.863341] vcc_sys: could not add device link regulator.8 err -2 [ 0.863413] vdd_log: 800 <--> 1400 mV at 896 mV [ 0.863982] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.865593] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 35, base_baud = 1500000) is a 16550A [ 0.982559] console [ttyS2] enabled [ 0.983909] [drm] Initialized drm 1.1.0 20060810 [ 0.988002] [drm] Rockchip DRM driver version: v1.0.1 [ 0.988957] usbcore: registered new interface driver udl [ 0.990744] Unable to detect cache hierarchy for CPU 0 [ 0.992030] brd: module loaded [ 0.997825] loop: module loaded [ 0.998185] lkdtm: No crash points registered, enable through debugfs [ 1.000265] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel [ 1.000871] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel [ 1.001481] rockchip-spi ff1d0000.spi: no high_speed pinctrl state [ 1.002601] m25p80 spi32766.0: gd25q128 (16384 Kbytes) [ 1.003095] 3 ofpart partitions found on MTD device spi32766.0 [ 1.003640] Creating 3 MTD partitions on "spi32766.0": [ 1.004111] 0x000000000000-0x0000003f8000 : "loader" [ 1.005476] 0x0000003f8000-0x000000400000 : "env" [ 1.006738] 0x0000007c0000-0x000000800000 : "vendor" [ 1.009486] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree [ 1.009567] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 1.010225] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 1.010742] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). [ 1.011282] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 1.012011] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ 1.012651] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 1.018218] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 1.018841] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 1.019313] Ring mode enabled [ 1.019598] DMA HW capability register supported [ 1.020001] Normal descriptors [ 1.020331] RX Checksum Offload Engine supported (type 2) [ 1.020829] TX Checksum insertion supported [ 1.021227] Wake-Up On Lan supported [ 1.021598] Enable RX Mitigation via HW Watchdog Timer [ 1.022186] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0) [ 1.090847] libphy: stmmac: probed [ 1.091189] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 1.091772] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) [ 1.093721] Rockchip WiFi SYS interface (V1.00) ... [ 1.094355] usbcore: registered new interface driver cdc_ether [ 1.094944] usbcore: registered new interface driver rndis_host [ 1.097678] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3 [ 1.103790] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd [ 1.105475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.106080] ehci-pci: EHCI PCI platform driver [ 1.106578] ehci-platform: EHCI generic platform driver [ 1.110903] ehci-platform fe3c0000.usb: EHCI Host Controller [ 1.111587] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 [ 1.112436] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000 [ 1.118188] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 1.118908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.119539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120213] usb usb1: Product: EHCI Host Controller [ 1.120659] usb usb1: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 ehci_hcd [ 1.121445] usb usb1: SerialNumber: fe3c0000.usb [ 1.122342] hub 1-0:1.0: USB hub found [ 1.122715] hub 1-0:1.0: 1 port detected [ 1.123620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.124211] ohci-platform: OHCI generic platform driver [ 1.125155] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 1.125973] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 [ 1.126788] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000 [ 1.182334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.182951] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.183625] usb usb2: Product: Generic Platform OHCI controller [ 1.184173] usb usb2: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 ohci_hcd [ 1.184947] usb usb2: SerialNumber: fe3e0000.usb [ 1.185801] hub 2-0:1.0: USB hub found [ 1.186202] hub 2-0:1.0: 1 port detected [ 1.188828] usbcore: registered new interface driver iforce [ 1.189463] usbcore: registered new interface driver xpad [ 1.190346] usbcore: registered new interface driver usbtouchscreen [ 1.191320] .. rk pwm remotectl v1.1 init [ 1.192047] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0 [ 1.193571] i2c /dev entries driver [ 1.194710] fan53555-regulator 0-0040: GPIO lookup for consumer vsel [ 1.194721] fan53555-regulator 0-0040: using device tree for GPIO lookup [ 1.194751] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0) [ 1.195126] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 1.195775] fan53555-regulator 0-0040: Looking up vin-supply from device tree [ 1.195821] fan53555-reg: supplied by vcc_sys [ 1.196263] vcc_sys: could not add device link regulator.9 err -2 [ 1.197592] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV [ 1.198184] fan53555-regulator 0-0041: GPIO lookup for consumer vsel [ 1.198193] fan53555-regulator 0-0041: using device tree for GPIO lookup [ 1.198219] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0) [ 1.198563] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 1.199226] fan53555-regulator 0-0041: Looking up vin-supply from device tree [ 1.199262] fan53555-reg: supplied by vcc_sys [ 1.199664] vcc_sys: could not add device link regulator.10 err -2 [ 1.201290] vdd_gpu: 712 <--> 1500 mV at 1000 mV [ 1.202203] rk808 0-001b: Pmic Chip id: 0x0 [ 1.205719] rk808 0-001b: GPIO lookup for consumer dvs [ 1.205728] rk808 0-001b: using device tree for GPIO lookup [ 1.205739] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]' [ 1.205748] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' [ 1.205755] rk808 0-001b: using lookup tables for GPIO lookup [ 1.205762] rk808 0-001b: lookup for GPIO dvs failed [ 1.205770] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.206350] rk808 0-001b: GPIO lookup for consumer dvs [ 1.206357] rk808 0-001b: using device tree for GPIO lookup [ 1.206367] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]' [ 1.206374] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]' [ 1.206381] rk808 0-001b: using lookup tables for GPIO lookup [ 1.206388] rk808 0-001b: lookup for GPIO dvs failed [ 1.206396] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.206993] rk808 0-001b: Looking up vcc1-supply from device tree [ 1.207039] DCDC_REG1: supplied by vcc_sys [ 1.207432] vcc_sys: could not add device link regulator.11 err -2 [ 1.207883] vdd_center: 900 mV [ 1.208140] rk808 0-001b: Looking up vcc2-supply from device tree [ 1.208191] DCDC_REG2: supplied by vcc_sys [ 1.208573] vcc_sys: could not add device link regulator.12 err -2 [ 1.208871] vdd_cpu_l: 750 <--> 1350 mV at 900 mV [ 1.209110] rk808 0-001b: Looking up vcc3-supply from device tree [ 1.209146] DCDC_REG3: supplied by vcc_sys [ 1.209543] vcc_sys: could not add device link regulator.13 err -2 [ 1.209574] vcc_ddr: at 5000 mV [ 1.209792] rk808 0-001b: Looking up vcc4-supply from device tree [ 1.209828] DCDC_REG4: supplied by vcc_sys [ 1.210222] vcc_sys: could not add device link regulator.14 err -2 [ 1.210402] vcc_1v8: 1800 mV [ 1.210640] rk808 0-001b: Looking up vcc6-supply from device tree [ 1.210676] LDO_REG1: supplied by vcc_sys [ 1.211049] vcc_sys: could not add device link regulator.15 err -2 [ 1.211892] vcc1v8_dvp: 1800 mV [ 1.212116] rk808 0-001b: Looking up vcc6-supply from device tree [ 1.212152] LDO_REG2: supplied by vcc_sys [ 1.212541] vcc_sys: could not add device link regulator.16 err -2 [ 1.213251] vcc3v0_touch: 3000 mV [ 1.213484] rk808 0-001b: Looking up vcc7-supply from device tree [ 1.213519] LDO_REG3: supplied by vcc_sys [ 1.213891] vcc_sys: could not add device link regulator.17 err -2 [ 1.214589] vcc1v8_pmu: 1800 mV [ 1.214838] rk808 0-001b: Looking up vcc9-supply from device tree [ 1.214873] LDO_REG4: supplied by vcc_sys [ 1.215261] vcc_sys: could not add device link regulator.18 err -2 [ 1.215960] vcc_sd: 1800 <--> 3300 mV at 3300 mV [ 1.216222] rk808 0-001b: Looking up vcc9-supply from device tree [ 1.216257] LDO_REG5: supplied by vcc_sys [ 1.216630] vcc_sys: could not add device link regulator.19 err -2 [ 1.217330] vcca3v0_codec: 3000 mV [ 1.217578] rk808 0-001b: Looking up vcc10-supply from device tree [ 1.217612] LDO_REG6: supplied by vcc_sys [ 1.217984] vcc_sys: could not add device link regulator.20 err -2 [ 1.218695] vcc_1v5: 1500 mV [ 1.218940] rk808 0-001b: Looking up vcc7-supply from device tree [ 1.218974] LDO_REG7: supplied by vcc_sys [ 1.219363] vcc_sys: could not add device link regulator.21 err -2 [ 1.220062] vcca1v8_codec: 1800 mV [ 1.220325] rk808 0-001b: Looking up vcc11-supply from device tree [ 1.220360] LDO_REG8: supplied by vcc_sys [ 1.220733] vcc_sys: could not add device link regulator.22 err -2 [ 1.221442] vcc_3v0: 3000 mV [ 1.221682] rk808 0-001b: Looking up vcc8-supply from device tree [ 1.221718] SWITCH_REG1: supplied by vcc3v3_sys [ 1.222135] vcc3v3_sys: could not add device link regulator.23 err -2 [ 1.222183] vcc3v3_s3: at 3300 mV [ 1.222413] rk808 0-001b: Looking up vcc12-supply from device tree [ 1.222450] SWITCH_REG2: supplied by vcc3v3_sys [ 1.222868] vcc3v3_sys: could not add device link regulator.24 err -2 [ 1.223016] vcc3v3_s0: at 3300 mV [ 1.227261] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 [ 1.228295] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d6000 [ 1.229604] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094d8000 [ 1.231024] fusb302 4-0022: GPIO lookup for consumer int-n [ 1.231033] fusb302 4-0022: using device tree for GPIO lookup [ 1.231062] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ 1.231088] fusb302 4-0022: GPIO lookup for consumer vbus-5v [ 1.231095] fusb302 4-0022: using device tree for GPIO lookup [ 1.231118] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ 1.231142] fusb302 4-0022: GPIO lookup for consumer vbus-other [ 1.231149] fusb302 4-0022: using device tree for GPIO lookup [ 1.231158] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 1.231184] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 1.231191] fusb302 4-0022: using lookup tables for GPIO lookup [ 1.231198] fusb302 4-0022: lookup for GPIO vbus-other failed [ 1.231206] fusb302 4-0022: GPIO lookup for consumer discharge [ 1.231212] fusb302 4-0022: using device tree for GPIO lookup [ 1.231220] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 1.231228] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ 1.231235] fusb302 4-0022: using lookup tables for GPIO lookup [ 1.231242] fusb302 4-0022: lookup for GPIO discharge failed [ 1.231400] fusb302 4-0022: Can't get property of role, set role to default DRP [ 1.240453] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE [ 1.241295] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094da000 [ 1.242984] IR NEC protocol handler initialized [ 1.243420] IR RC5(x/sz) protocol handler initialized [ 1.243884] IR RC6 protocol handler initialized [ 1.244314] IR JVC protocol handler initialized [ 1.244733] IR Sony protocol handler initialized [ 1.245169] IR SANYO protocol handler initialized [ 1.245604] IR Sharp protocol handler initialized [ 1.246036] IR MCE Keyboard/mouse protocol handler initialized [ 1.246579] IR XMP protocol handler initialized [ 1.247152] usbcore: registered new interface driver uvcvideo [ 1.247683] USB Video Class driver (1.1.1) [ 1.248565] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree [ 1.248745] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree [ 1.248844] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree [ 1.248908] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree [ 1.248963] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree [ 1.250604] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 [ 1.251582] rockchip-thermal ff260000.tsadc: tsadc is probed successfully! [ 1.253236] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.254014] Bluetooth: Virtual HCI driver ver 1.5 [ 1.254580] Bluetooth: HCI UART driver ver 2.3 [ 1.254991] Bluetooth: HCI UART protocol H4 registered [ 1.255473] Bluetooth: HCI UART protocol LL registered [ 1.255941] Bluetooth: HCI UART protocol ATH3K registered [ 1.256500] usbcore: registered new interface driver bfusb [ 1.257053] usbcore: registered new interface driver btusb [ 1.257991] cpu cpu0: Failed to get leakage [ 1.258412] cpu cpu0: Looking up cpu-supply from device tree [ 1.258474] cpu cpu0: Failed to get pvtm [ 1.259080] cpu cpu4: Failed to get leakage [ 1.259494] cpu cpu4: Looking up cpu-supply from device tree [ 1.259560] cpu cpu4: Failed to get pvtm [ 1.260147] cpu cpu0: Looking up cpu-supply from device tree [ 1.260443] cpu cpu0: Looking up cpu-supply from device tree [ 1.261599] cpu cpu4: Looking up cpu-supply from device tree [ 1.264255] sdhci: Secure Digital Host Controller Interface driver [ 1.264819] sdhci: Copyright(c) Pierre Ossman [ 1.265237] Synopsys Designware Multimedia Card Interface Driver [ 1.266704] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. [ 1.267413] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. [ 1.268035] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a [ 1.268610] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ 1.269546] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. [ 1.270300] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree [ 1.270312] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed [ 1.270342] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree [ 1.270408] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found [ 1.270982] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd [ 1.270989] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ 1.271000] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]' [ 1.271009] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]' [ 1.271016] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ 1.271025] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed [ 1.271033] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp [ 1.271040] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ 1.271048] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]' [ 1.271056] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]' [ 1.271063] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ 1.271070] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed [ 1.271233] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 1.271922] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 1.283230] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.294232] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized [ 1.295059] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.296013] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp [ 1.296022] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup [ 1.296030] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]' [ 1.296039] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]' [ 1.296046] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup [ 1.296054] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed [ 1.297180] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree [ 1.297191] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed [ 1.297214] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree [ 1.297223] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed [ 1.297241] sdhci-arasan fe330000.sdhci: No vmmc regulator found [ 1.297792] sdhci-arasan fe330000.sdhci: No vqmmc regulator found [ 1.324259] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ 1.326081] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0) [ 1.326335] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0) [ 1.326655] hidraw: raw HID events driver (C) Jiri Kosina [ 1.331132] usbcore: registered new interface driver usbhid [ 1.331659] usbhid: USB HID core driver [ 1.335798] usbcore: registered new interface driver snd-usb-audio [ 1.337138] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@10[0]' [ 1.337150] es8316 1-0010: Can not read property spk_ctl_gpio [ 1.337714] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@10[0]' - status (0) [ 1.343517] u32 classifier [ 1.343789] Netfilter messages via NETLINK v0.30. [ 1.344280] ip_set: protocol 6 [ 1.344760] Initializing XFRM netlink socket [ 1.345736] NET: Registered protocol family 10 [ 1.347282] NET: Registered protocol family 17 [ 1.347714] NET: Registered protocol family 15 [ 1.348149] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.348227] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 1.348545] vcc_sd: ramp_delay not set [ 1.348554] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done [ 1.350687] Bridge firewalling registered [ 1.351523] Bluetooth: RFCOMM socket layer initialized [ 1.352020] Bluetooth: RFCOMM ver 1.11 [ 1.352419] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.352962] Bluetooth: HIDP socket layer initialized [ 1.353491] 8021q: 802.1Q VLAN Support v1.8 [ 1.353905] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 1.354645] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 1.355120] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354 [ 1.355753] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 1.356418] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 1.357096] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ 1.357105] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ 1.357112] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ 1.357146] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ 1.357153] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0. [ 1.357984] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 1.358469] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 1.358954] [BT_RFKILL]: Enter rfkill_rk_init [ 1.359689] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0) [ 1.359696] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83. [ 1.360453] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]' [ 1.360476] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ 1.360482] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9. [ 1.361230] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ 1.361237] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91. [ 1.361975] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0) [ 1.361981] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4. [ 1.363668] [BT_RFKILL]: Request irq for bt wakeup host [ 1.364239] [BT_RFKILL]: ** disable irq [ 1.364743] [BT_RFKILL]: bt_default device registered. [ 1.365321] Key type dns_resolver registered [ 1.366477] Registered cp15_barrier emulation handler [ 1.367048] Registered setend emulation handler [ 1.368470] registered taskstats version 1 [ 1.371444] Btrfs loaded, integrity-checker=on [ 1.371932] BTRFS: selftest: Running btrfs free space cache tests [ 1.372521] BTRFS: selftest: Running extent only tests [ 1.373000] BTRFS: selftest: Running bitmap only tests [ 1.373493] BTRFS: selftest: Running bitmap and extent tests [ 1.374027] BTRFS: selftest: Running space stealing from bitmap to extent [ 1.375376] BTRFS: selftest: Free space cache tests finished [ 1.375889] BTRFS: selftest: Running extent buffer operation tests [ 1.375968] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 1.377363] BTRFS: selftest: Running btrfs_split_item tests [ 1.377922] BTRFS: selftest: Running find delalloc tests [ 1.518240] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 235 [ 1.518874] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 1.520075] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.528046] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 1.534228] BTRFS: selftest: Running btrfs_get_extent tests [ 1.534834] BTRFS: selftest: Running hole first btrfs_get_extent test [ 1.535429] BTRFS: selftest: Running outstanding_extents tests [ 1.535978] BTRFS: selftest: Running qgroup tests [ 1.536409] BTRFS: selftest: Qgroup basic add [ 1.536835] BTRFS: selftest: Qgroup multiple refs test [ 1.549958] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree [ 1.549966] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ 1.550341] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree [ 1.550378] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ 1.550446] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator [ 1.551979] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree [ 1.552319] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2 [ 1.554586] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree [ 1.554617] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed [ 1.554916] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree [ 1.554943] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed [ 1.558033] rockchip-drm display-subsystem: devfreq is not set [ 1.559396] rockchip-vop ff900000.vop: missing rockchip,grf property [ 1.560781] rockchip-vop ff900000.vop: unable to request PWM [ 1.561395] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008cffcf8) [ 1.562330] rockchip-vop ff8f0000.vop: missing rockchip,grf property [ 1.563480] rockchip-vop ff8f0000.vop: unable to request PWM [ 1.564054] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008cffcf8) [ 1.566216] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports [ 1.566913] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.568006] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.571241] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cf6010) [ 1.572942] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008cf6f60) [ 1.573873] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 1.574814] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.575459] [drm] No driver support for vblank timestamp query. [ 1.576390] rockchip-drm display-subsystem: failed to parse loader memory [ 1.577190] rockchip-drm display-subsystem: No connectors reported connected with modes [ 1.578044] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.601703] Console: switching to colour frame buffer device 128x48 [ 1.615904] rockchip-drm display-subsystem: fb0: frame buffer device [ 1.627090] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 1.628082] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 [ 1.629135] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 [ 1.630184] xhci-hcd xhci-hcd.5.auto: irq 223, io mem 0xfe800000 [ 1.631025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.631836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.632657] usb usb3: Product: xHCI Host Controller [ 1.633216] usb usb3: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 xhci-hcd [ 1.634172] usb usb3: SerialNumber: xhci-hcd.5.auto [ 1.635393] hub 3-0:1.0: USB hub found [ 1.635845] hub 3-0:1.0: 1 port detected [ 1.636634] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 1.637491] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 [ 1.638422] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.639436] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.640209] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.641013] usb usb4: Product: xHCI Host Controller [ 1.641573] usb usb4: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 xhci-hcd [ 1.642532] usb usb4: SerialNumber: xhci-hcd.5.auto [ 1.643709] hub 4-0:1.0: USB hub found [ 1.644157] hub 4-0:1.0: 1 port detected [ 1.646182] xhci-hcd xhci-hcd.5.auto: remove, state 1 [ 1.652559] usb usb4: USB disconnect, device number 1 [ 1.682883] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microseconds. [ 1.688343] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting reset. [ 1.693792] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered [ 1.699405] xhci-hcd xhci-hcd.5.auto: remove, state 1 [ 1.704596] usb usb3: USB disconnect, device number 1 [ 1.710804] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered [ 1.722048] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 1.726827] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3 [ 1.731520] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 [ 1.736242] xhci-hcd xhci-hcd.6.auto: irq 224, io mem 0xfe900000 [ 1.740708] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.745117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.749517] usb usb3: Product: xHCI Host Controller [ 1.753645] usb usb3: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 xhci-hcd [ 1.758152] usb usb3: SerialNumber: xhci-hcd.6.auto [ 1.763526] hub 3-0:1.0: USB hub found [ 1.770366] hub 3-0:1.0: 1 port detected [ 1.777658] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 1.784658] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4 [ 1.791697] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.798981] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.803369] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.807138] usb usb4: Product: xHCI Host Controller [ 1.810673] usb usb4: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 xhci-hcd [ 1.814599] usb usb4: SerialNumber: xhci-hcd.6.auto [ 1.818600] hub 4-0:1.0: USB hub found [ 1.822099] hub 4-0:1.0: 1 port detected [ 1.829889] ehci-platform fe380000.usb: EHCI Host Controller [ 1.833675] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 [ 1.837588] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000 [ 1.847356] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 1.851198] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.854837] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.858494] usb usb5: Product: EHCI Host Controller [ 1.861934] usb usb5: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 ehci_hcd [ 1.865790] usb usb5: SerialNumber: fe380000.usb [ 1.869803] hub 5-0:1.0: USB hub found [ 1.873248] hub 5-0:1.0: 1 port detected [ 1.877457] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 1.881306] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 [ 1.885061] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000 [ 1.943020] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.955720] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.968318] usb usb6: Product: Generic Platform OHCI controller [ 1.980814] usb usb6: Manufacturer: Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524 ohci_hcd [ 1.993959] usb usb6: SerialNumber: fe3a0000.usb [ 2.008325] hub 6-0:1.0: USB hub found [ 2.013645] hub 6-0:1.0: 1 port detected [ 2.019903] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]' [ 2.019914] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]' [ 2.117677] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [ 2.130868] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1 [ 2.143937] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack [ 2.157291] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P [ 2.170452] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P [ 2.180474] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file [ 2.186256] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file [ 2.192087] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file [ 2.197824] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file [ 2.203418] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file [ 2.208930] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file [ 2.218085] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]' [ 2.218101] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]' [ 2.218665] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok [ 2.231261] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:16 UTC (1358499016) [ 2.238153] of_cfs_init [ 2.244348] of_cfs_init: OK [ 2.279257] vcc3v3_pcie: disabling [ 2.283137] rk-keypad rockchip-key: no io-channels defined [ 2.286677] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0) [ 2.286703] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0) [ 2.286883] input: rk29-keypad as /devices/platform/rockchip-key/input/input1 [ 2.291871] ALSA device list: [ 2.296220] #0: rockchip,es8316-codec [ 2.300540] #1: ROCKCHIP,SPDIF [ 2.305600] ttyS2 - failed to request DMA, use interrupt mode [ 2.318949] Freeing unused kernel memory: 1152K [ 2.368990] random: systemd-udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.373249] random: systemd-udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.381410] random: udevadm: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.385381] random: udevadm: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.389279] random: systemd-udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.393220] random: systemd-udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.397095] random: systemd-udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.400947] random: udevadm: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.404433] random: udevadm: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.407817] random: udevadm: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 2.575291] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 2.669926] phy phy-pcie-phy.9: Looking up phy-supply from device tree [ 2.669946] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed [ 2.672315] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep [ 2.672336] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup [ 2.672397] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0) [ 2.672770] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree [ 2.672966] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree [ 2.672981] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed [ 2.673020] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found [ 2.679689] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree [ 2.679729] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed [ 2.679784] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found [ 2.686890] rockchip-pcie f8000000.pcie: invalid power supply [ 2.711260] PCI host bridge /pcie@f8000000 ranges: [ 2.713995] MEM 0xfa000000..0xfbdfffff -> 0xfa000000 [ 2.716717] IO 0xfbe00000..0xfbefffff -> 0xfbe00000 [ 2.719732] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 2.732190] pci_bus 0000:00: root bus resource [bus 00-1f] [ 2.734613] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 2.737098] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 2.739844] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 2.739942] pci 0000:00:00.0: supports D1 [ 2.739948] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.740229] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.747853] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-1f] (conflicts with (null) [bus 00-1f]) [ 2.747886] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601 [ 2.747926] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.750198] pci 0000:01:00.0: reg 0x10: [io size 0x0008] [ 2.750211] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 2.752440] pci 0000:01:00.0: reg 0x14: [io size 0x0004] [ 2.752452] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.754622] pci 0000:01:00.0: reg 0x18: [io size 0x0008] [ 2.754634] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 2.756780] pci 0000:01:00.0: reg 0x1c: [io size 0x0004] [ 2.756791] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 2.758902] pci 0000:01:00.0: reg 0x20: [io size 0x0020] [ 2.758914] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 2.758926] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.767264] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.767299] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff] [ 2.770135] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref] [ 2.772366] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0101ff] [ 2.774460] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020] [ 2.776458] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020] [ 2.778472] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008] [ 2.780477] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008] [ 2.782522] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008] [ 2.784554] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008] [ 2.786606] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004] [ 2.788496] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004] [ 2.790314] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004] [ 2.792117] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004] [ 2.793961] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.795650] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] [ 2.800925] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 2.803116] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 2.803388] md: linear personality registered for level -1 [ 2.806940] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.808863] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 2.809348] aer 0000:00:00.0:pcie02: service driver aer loaded [ 2.809456] ahci 0000:01:00.0: version 3.0 [ 2.809468] ahci 0000:01:00.0: enabling device (0000 -> 0002) [ 2.809650] md: multipath personality registered for level -4 [ 2.813225] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.813999] md: raid0 personality registered for level 0 [ 2.816771] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.818700] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.821648] scsi host0: ahci [ 2.823619] scsi host1: ahci [ 2.825471] ata1: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010100 irq 239 [ 2.827539] ata2: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010180 irq 239 [ 2.832249] md: raid1 personality registered for level 1 [ 2.847033] async_tx: api initialized (async) [ 2.851691] md: raid6 personality registered for level 6 [ 2.862482] md: raid5 personality registered for level 5 [ 2.873154] md: raid4 personality registered for level 4 [ 2.897874] md: raid10 personality registered for level 10 [ 3.452474] random: nonblocking pool is initialized [ 3.550509] EXT4-fs (mmcblk0p7): 2 orphan inodes deleted [ 3.558010] EXT4-fs (mmcblk0p7): recovery complete [ 3.577286] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null) [ 3.884357] systemd[1]: System time before build time, advancing clock. [ 3.949945] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.994255] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.018869] systemd[1]: Detected architecture arm64. [ 4.035970] systemd[1]: Set hostname to . [ 4.585592] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 4.774885] systemd[1]: Listening on Journal Socket. [ 4.786881] systemd[1]: Listening on Journal Audit Socket. [ 4.795554] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.804537] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.813453] systemd[1]: Listening on Syslog Socket. [ 4.822452] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.832133] systemd[1]: Created slice User and Session Slice. [ 4.840381] systemd[1]: Reached target Swap. [ 4.848622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.858525] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.867502] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.876536] systemd[1]: Listening on udev Control Socket. [ 4.886240] systemd[1]: Created slice System Slice. [ 4.898505] systemd[1]: Mounting Huge Pages File System... [ 4.911424] systemd[1]: Mounting Debug File System... [ 4.924407] systemd[1]: Mounting NFSD configuration filesystem... [ 4.938118] systemd[1]: Created slice system-getty.slice. [ 4.959414] systemd[1]: Starting Load Kernel Modules... [ 4.968499] systemd[1]: Reached target Slices. [ 4.982153] systemd[1]: Starting Journal Service... [ 4.994225] systemd[1]: Mounting RPC Pipe File System... [ 5.003526] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.011909] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.021491] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.036332] ata1: SATA link down (SStatus 1 SControl 300) [ 5.036950] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.047423] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 5.047428] ata1: irq_stat 0x00000040, connection status changed [ 5.047437] ata1: SError: { CommWake DevExch } [ 5.047454] ata1: hard resetting link [ 5.074371] systemd[1]: Listening on udev Kernel Socket. [ 5.081502] systemd[1]: Listening on RPCbind Server Activation Socket. [ 5.088284] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.096348] systemd[1]: Reached target Encrypted Volumes. [ 5.106864] systemd[1]: Starting Nameserver information manager... [ 5.114654] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.125096] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.137513] systemd[1]: Mounting POSIX Message Queue File System... [ 5.151889] systemd[1]: Starting Restore / save the current clock... [ 5.160688] systemd[1]: Mounted NFSD configuration filesystem. [ 5.165591] systemd[1]: Mounted RPC Pipe File System. [ 5.173412] systemd[1]: Mounted Debug File System. [ 5.177325] systemd[1]: Mounted Huge Pages File System. [ 5.181392] systemd[1]: Mounted POSIX Message Queue File System. [ 5.188647] systemd[1]: Started Journal Service. [ 5.316900] systemd-journald[304]: Received request to flush runtime journal from PID 1 [ 5.681064] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree [ 5.681082] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed [ 5.681119] ff100000.saradc supply vref not found, using dummy regulator [ 5.731003] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present [ 5.733250] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16 [ 5.739707] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok [ 5.742351] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to create Playback debugfs file [ 5.767238] mali ff9a0000.gpu: Looking up mali-supply from device tree [ 5.767472] mali ff9a0000.gpu: Failed to get leakage [ 5.771727] mali ff9a0000.gpu: Looking up mali-supply from device tree [ 5.771787] vdd_gpu: could not add device link ff9a0000.gpu err -17 [ 5.771802] vdd_gpu: Failed to create debugfs directory [ 5.771820] mali ff9a0000.gpu: Failed to get pvtm [ 5.777559] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 [ 5.779886] mali ff9a0000.gpu: Protected mode not available [ 5.783768] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model [ 5.787144] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 399; [Func] : kbase_devfreq_init(); success initing power_model_simple. [ 5.793805] mali ff9a0000.gpu: Probed as mali0 [ 5.806817] [BT_RFKILL]: bt shut off power [ 5.828444] FAT-fs (mmcblk0p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 5.844700] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.264510] ata1: SATA link down (SStatus 1 SControl 300) [ 7.278896] ata1: EH complete [ 7.294018] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 7.300753] ata1: irq_stat 0x00000040, connection status changed [ 7.307000] ata1: SError: { CommWake DevExch } [ 7.313115] ata1: limiting SATA link speed to 1.5 Gbps [ 7.318460] ata1: hard resetting link [ 9.528571] ata1: SATA link down (SStatus 1 SControl 310) [ 9.543135] ata1: EH complete [ 9.558419] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 9.564962] ata1: irq_stat 0x00000040, connection status changed [ 9.571112] ata1: SError: { CommWake DevExch } [ 9.577041] ata1: limiting SATA link speed to 1.5 Gbps [ 9.583006] ata1: hard resetting link [ 11.792562] ata1: SATA link down (SStatus 1 SControl 310) [ 11.806813] ata1: EH complete [ 11.821960] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 11.828462] ata1: irq_stat 0x00000040, connection status changed [ 11.834584] ata1: SError: { CommWake DevExch } [ 11.840530] ata1: limiting SATA link speed to 1.5 Gbps [ 11.846526] ata1: hard resetting link [ 14.057567] ata1: SATA link down (SStatus 1 SControl 310) [ 14.071652] ata1: EH complete [ 14.087300] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 14.093435] ata1: irq_stat 0x00000040, connection status changed [ 14.099422] ata1: SError: { CommWake DevExch } [ 14.105275] ata1: limiting SATA link speed to 1.5 Gbps [ 14.110409] ata1: hard resetting link [ 16.320374] ata1: SATA link down (SStatus 1 SControl 310) [ 16.334648] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 16.349281] ata1: irq_stat 0x00000040, connection status changed [ 16.356251] ata1: SError: { CommWake DevExch } [ 16.362149] ata1: limiting SATA link speed to 1.5 Gbps [ 16.368052] ata1: hard resetting link [ 18.578413] ata1: SATA link down (SStatus 1 SControl 310) [ 18.592266] ata1: EH complete [ 18.606771] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 18.612885] ata1: irq_stat 0x00000040, connection status changed [ 18.618784] ata1: SError: { CommWake DevExch } [ 18.624527] ata1: limiting SATA link speed to 1.5 Gbps [ 18.630347] ata1: hard resetting link [ 20.840572] ata1: SATA link down (SStatus 1 SControl 310) [ 20.853842] ata1: EH complete [ 20.867602] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 20.873697] ata1: irq_stat 0x00000040, connection status changed [ 20.879305] ata1: SError: { CommWake DevExch } [ 20.884626] ata1: limiting SATA link speed to 1.5 Gbps [ 20.889926] ata1: hard resetting link [ 23.100573] ata1: SATA link down (SStatus 1 SControl 310) [ 23.112847] ata1: EH complete [ 23.125897] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 23.131539] ata1: irq_stat 0x00000040, connection status changed [ 23.136806] ata1: SError: { CommWake DevExch } [ 23.141913] ata1: limiting SATA link speed to 1.5 Gbps [ 23.147102] ata1: hard resetting link [ 25.356573] ata1: SATA link down (SStatus 1 SControl 310) [ 25.368840] ata1: EH complete [ 25.381892] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 25.387482] ata1: irq_stat 0x00000040, connection status changed [ 25.392740] ata1: SError: { CommWake DevExch } [ 25.397849] ata1: limiting SATA link speed to 1.5 Gbps [ 25.403034] ata1: hard resetting link [ 27.612571] ata1: SATA link down (SStatus 1 SControl 310) [ 27.624825] ata1: EH complete [ 27.637840] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 27.643480] ata1: irq_stat 0x00000040, connection status changed [ 27.648738] ata1: SError: { CommWake DevExch } [ 27.653841] ata1: limiting SATA link speed to 1.5 Gbps [ 27.659023] ata1: hard resetting link [ 29.868568] ata1: SATA link down (SStatus 1 SControl 310) [ 29.880860] ata1: EH complete [ 29.892875] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 29.905206] ata1: irq_stat 0x00000040, connection status changed [ 29.917512] ata1: SError: { CommWake DevExch } [ 29.929629] ata1: limiting SATA link speed to 1.5 Gbps [ 29.941832] ata1: hard resetting link [ 32.158569] ata1: SATA link down (SStatus 1 SControl 310) [ 32.170765] ata1: EH complete [ 32.182587] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 32.194864] ata1: irq_stat 0x00000040, connection status changed [ 32.207121] ata1: SError: { CommWake DevExch } [ 32.219233] ata1: limiting SATA link speed to 1.5 Gbps [ 32.231512] ata1: hard resetting link [ 34.448384] ata1: SATA link down (SStatus 1 SControl 310) [ 34.460573] ata1: EH complete [ 34.473638] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 34.479045] ata1: irq_stat 0x00000040, connection status changed [ 34.484306] ata1: SError: { CommWake DevExch } [ 34.489417] ata1: limiting SATA link speed to 1.5 Gbps [ 34.494594] ata1: hard resetting link [ 36.704568] ata1: SATA link down (SStatus 1 SControl 310) [ 36.716764] ata1: EH complete [ 36.729892] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 36.735270] ata1: irq_stat 0x00000040, connection status changed [ 36.740534] ata1: SError: { CommWake DevExch } [ 36.745649] ata1: limiting SATA link speed to 1.5 Gbps [ 36.750832] ata1: hard resetting link [ 38.960569] ata1: SATA link down (SStatus 1 SControl 310) [ 38.972783] ata1: EH complete [ 38.985973] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 38.991359] ata1: irq_stat 0x00000040, connection status changed [ 38.996629] ata1: SError: { CommWake DevExch } [ 39.001743] ata1: limiting SATA link speed to 1.5 Gbps [ 39.006933] ata1: hard resetting link [ 41.216567] ata1: SATA link down (SStatus 1 SControl 310) [ 41.228786] ata1: EH complete [ 41.242016] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 41.254373] ata1: irq_stat 0x00000040, connection status changed [ 41.259655] ata1: SError: { CommWake DevExch } [ 41.264779] ata1: limiting SATA link speed to 1.5 Gbps [ 41.269960] ata1: hard resetting link [ 43.479568] ata1: SATA link down (SStatus 1 SControl 310) [ 43.491786] ata1: EH complete [ 43.504984] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 43.510375] ata1: irq_stat 0x00000040, connection status changed [ 43.515648] ata1: SError: { CommWake DevExch } [ 43.520768] ata1: limiting SATA link speed to 1.5 Gbps [ 43.525954] ata1: hard resetting link [ 45.735568] ata1: SATA link down (SStatus 1 SControl 310) [ 45.747786] ata1: EH complete [ 45.760956] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 45.766339] ata1: irq_stat 0x00000040, connection status changed [ 45.771603] ata1: SError: { CommWake DevExch } [ 45.776713] ata1: limiting SATA link speed to 1.5 Gbps [ 45.781888] ata1: hard resetting link [ 47.991566] ata1: SATA link down (SStatus 1 SControl 310) [ 48.003756] ata1: EH complete [ 48.016941] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 48.022318] ata1: irq_stat 0x00000040, connection status changed [ 48.027578] ata1: SError: { CommWake DevExch } [ 48.032682] ata1: limiting SATA link speed to 1.5 Gbps [ 48.037855] ata1: hard resetting link [ 50.247521] ata1: SATA link down (SStatus 1 SControl 310) [ 50.259709] ata1: EH complete [ 50.272606] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 50.284874] ata1: irq_stat 0x00000040, connection status changed [ 50.297109] ata1: SError: { CommWake DevExch } [ 50.309145] ata1: limiting SATA link speed to 1.5 Gbps [ 50.321280] ata1: hard resetting link [ 52.538568] ata1: SATA link down (SStatus 1 SControl 310) [ 52.550766] ata1: EH complete [ 52.564213] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 52.569611] ata1: irq_stat 0x00000040, connection status changed [ 52.574876] ata1: SError: { CommWake DevExch } [ 52.579986] ata1: limiting SATA link speed to 1.5 Gbps [ 52.585173] ata1: hard resetting link [ 54.795566] ata1: SATA link down (SStatus 1 SControl 310) [ 54.807754] ata1: EH complete [ 54.820883] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 54.826263] ata1: irq_stat 0x00000040, connection status changed [ 54.831519] ata1: SError: { CommWake DevExch } [ 54.836627] ata1: limiting SATA link speed to 1.5 Gbps [ 54.841798] ata1: hard resetting link [ 57.051522] ata1: SATA link down (SStatus 1 SControl 310) [ 57.063774] ata1: EH complete [ 57.065406] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 57.065414] ata1: irq_stat 0x00000040, connection status changed [ 57.065430] ata1: SError: { CommWake DevExch } [ 57.065455] ata1: limiting SATA link speed to 1.5 Gbps [ 57.065469] ata1: hard resetting link [ 59.270521] ata1: SATA link down (SStatus 1 SControl 310) [ 59.282688] ata1: EH complete [ 59.295517] ata2: SATA link down (SStatus 1 SControl 300) [ 59.307562] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 59.319967] ata1: irq_stat 0x00000040, connection status changed [ 59.332163] ata1: SError: { CommWake DevExch } [ 59.344258] ata1: limiting SATA link speed to 1.5 Gbps [ 59.356344] ata1: hard resetting link [ 59.369601] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 59.374999] ata2: irq_stat 0x00000040, connection status changed [ 59.380250] ata2: SError: { CommWake DevExch } [ 59.385349] ata2: hard resetting link [ 61.593380] ata1: SATA link down (SStatus 1 SControl 310) [ 61.605662] ata1: EH complete [ 61.617553] ata2: SATA link down (SStatus 1 SControl 300) [ 61.629651] ata2: EH complete [ 61.642575] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 61.647989] ata1: irq_stat 0x00000040, connection status changed [ 61.653247] ata1: SError: { CommWake DevExch } [ 61.658351] ata1: limiting SATA link speed to 1.5 Gbps [ 61.663522] ata1: hard resetting link [ 61.669354] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 61.674029] ata2: irq_stat 0x00000040, connection status changed [ 61.678535] ata2: SError: { CommWake DevExch } [ 61.682871] ata2: limiting SATA link speed to 1.5 Gbps [ 61.687285] ata2: hard resetting link [ 63.895569] ata1: SATA link down (SStatus 1 SControl 310) [ 63.907865] ata1: EH complete [ 63.919771] ata2: SATA link down (SStatus 1 SControl 310) [ 63.931879] ata2: EH complete [ 63.944820] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 63.950192] ata1: irq_stat 0x00000040, connection status changed [ 63.955458] ata1: SError: { CommWake DevExch } [ 63.960565] ata1: limiting SATA link speed to 1.5 Gbps [ 63.965744] ata1: hard resetting link [ 63.971610] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 63.976293] ata2: irq_stat 0x00000040, connection status changed [ 63.980806] ata2: SError: { CommWake DevExch } [ 63.985151] ata2: limiting SATA link speed to 1.5 Gbps [ 63.989570] ata2: hard resetting link [ 66.197380] ata1: SATA link down (SStatus 1 SControl 310) [ 66.209718] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 66.222336] ata1: irq_stat 0x00000040, connection status changed [ 66.234693] ata1: SError: { CommWake DevExch } [ 66.246812] ata1: limiting SATA link speed to 1.5 Gbps [ 66.259085] ata1: hard resetting link [ 66.271118] ata2: SATA link down (SStatus 1 SControl 310) [ 66.283445] ata2: EH complete [ 66.296890] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 66.302390] ata2: irq_stat 0x00000040, connection status changed [ 66.307773] ata2: SError: { CommWake DevExch } [ 66.312949] ata2: limiting SATA link speed to 1.5 Gbps [ 66.318174] ata2: hard resetting link [ 68.526568] ata1: SATA link down (SStatus 1 SControl 310) [ 68.538941] ata1: EH complete [ 68.550936] ata2: SATA link down (SStatus 1 SControl 310) [ 68.563158] ata2: EH complete [ 68.576399] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 68.581817] ata1: irq_stat 0x00000040, connection status changed [ 68.587130] ata1: SError: { CommWake DevExch } [ 68.592272] ata1: limiting SATA link speed to 1.5 Gbps [ 68.597486] ata1: hard resetting link [ 68.603406] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 68.608150] ata2: irq_stat 0x00000040, connection status changed [ 68.612719] ata2: SError: { CommWake DevExch } [ 68.617100] ata2: limiting SATA link speed to 1.5 Gbps [ 68.621541] ata2: hard resetting link [ 70.829566] ata1: SATA link down (SStatus 1 SControl 310) [ 70.841965] ata1: EH complete [ 70.853873] ata2: SATA link down (SStatus 1 SControl 310) [ 70.866080] ata2: EH complete [ 70.879121] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 70.884536] ata1: irq_stat 0x00000040, connection status changed [ 70.889841] ata1: SError: { CommWake DevExch } [ 70.894988] ata1: limiting SATA link speed to 1.5 Gbps [ 70.900207] ata1: hard resetting link [ 70.906049] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 70.910818] ata2: irq_stat 0x00000040, connection status changed [ 70.915395] ata2: SError: { CommWake DevExch } [ 70.919777] ata2: limiting SATA link speed to 1.5 Gbps [ 70.924221] ata2: hard resetting link [ 73.132567] ata1: SATA link down (SStatus 1 SControl 310) [ 73.144976] ata1: EH complete [ 73.156891] ata2: SATA link down (SStatus 1 SControl 310) [ 73.168993] ata2: EH complete [ 73.182060] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 73.187479] ata1: irq_stat 0x00000040, connection status changed [ 73.192788] ata1: SError: { CommWake DevExch } [ 73.197933] ata1: limiting SATA link speed to 1.5 Gbps [ 73.203105] ata1: hard resetting link [ 73.208887] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 73.213545] ata2: irq_stat 0x00000040, connection status changed [ 73.218072] ata2: SError: { CommWake DevExch } [ 73.222454] ata2: limiting SATA link speed to 1.5 Gbps [ 73.226888] ata2: hard resetting link [ 75.434380] ata1: SATA link down (SStatus 1 SControl 310) [ 75.446663] ata1: EH complete [ 75.458456] ata2: SATA link down (SStatus 1 SControl 310) [ 75.470626] ata2: EH complete [ 75.483643] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 75.489059] ata1: irq_stat 0x00000040, connection status changed [ 75.494349] ata1: SError: { CommWake DevExch } [ 75.499482] ata1: limiting SATA link speed to 1.5 Gbps [ 75.504685] ata1: hard resetting link [ 75.510585] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 75.515287] ata2: irq_stat 0x00000040, connection status changed [ 75.519816] ata2: SError: { CommWake DevExch } [ 75.524187] ata2: limiting SATA link speed to 1.5 Gbps [ 75.528612] ata2: hard resetting link [ 77.736565] ata1: SATA link down (SStatus 1 SControl 310) [ 77.748837] ata1: EH complete [ 77.760621] ata2: SATA link down (SStatus 1 SControl 310) [ 77.772662] ata2: EH complete [ 77.785653] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 77.791063] ata1: irq_stat 0x00000040, connection status changed [ 77.796349] ata1: SError: { CommWake DevExch } [ 77.801477] ata1: limiting SATA link speed to 1.5 Gbps [ 77.806677] ata1: hard resetting link [ 77.812558] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 77.817255] ata2: irq_stat 0x00000040, connection status changed [ 77.821777] ata2: SError: { CommWake DevExch } [ 77.826133] ata2: limiting SATA link speed to 1.5 Gbps [ 77.830562] ata2: hard resetting link [ 80.038420] ata1: SATA link down (SStatus 1 SControl 310) [ 80.050666] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 80.063208] ata1: irq_stat 0x00000040, connection status changed [ 80.063224] ata1: SError: { CommWake DevExch } [ 80.063253] ata1: limiting SATA link speed to 1.5 Gbps [ 80.063268] ata1: hard resetting link [ 80.063346] ata2: SATA link down (SStatus 1 SControl 310) [ 80.063381] ata2: EH complete [ 80.065532] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 80.065535] ata2: irq_stat 0x00000040, connection status changed [ 80.065542] ata2: SError: { CommWake DevExch } [ 80.065553] ata2: limiting SATA link speed to 1.5 Gbps [ 80.065559] ata2: hard resetting link [ 82.269379] ata1: SATA link down (SStatus 1 SControl 310) [ 82.281743] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3 [ 82.294212] ata1: irq_stat 0x00000040, connection status changed [ 82.306380] ata1: SError: { CommWake DevExch } [ 82.318373] ata1: limiting SATA link speed to 1.5 Gbps [ 82.330425] ata1: hard resetting link [ 82.342362] ata2: SATA link down (SStatus 1 SControl 310) [ 82.354549] ata2: EH complete [ 82.367951] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 82.373395] ata2: irq_stat 0x00000040, connection status changed [ 82.378726] ata2: SError: { CommWake DevExch } [ 82.383853] ata2: limiting SATA link speed to 1.5 Gbps [ 82.389020] ata2: hard resetting link [ 84.597568] ata1: SATA link down (SStatus 1 SControl 310) [ 84.609873] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t2 [ 84.622459] ata1: irq_stat 0x00000040, connection status changed [ 84.634778] ata1: SError: { CommWake DevExch } [ 84.646849] ata1: limiting SATA link speed to 1.5 Gbps [ 84.658940] ata1: hard resetting link [ 84.670897] ata2: SATA link down (SStatus 1 SControl 310) [ 84.683288] ata2: EH complete [ 84.696877] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 84.702341] ata2: irq_stat 0x00000040, connection status changed [ 84.707689] ata2: SError: { CommWake DevExch } [ 84.712877] ata2: limiting SATA link speed to 1.5 Gbps [ 84.718101] ata2: hard resetting link [ 86.926566] ata1: SATA link down (SStatus 1 SControl 310) [ 86.938863] ata1: EH complete [ 86.950781] ata2: SATA link down (SStatus 1 SControl 310) [ 86.963019] ata2: EH complete [ 86.976111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 86.981507] ata1: irq_stat 0x00000040, connection status changed [ 86.986773] ata1: SError: { CommWake DevExch } [ 86.991885] ata1: limiting SATA link speed to 1.5 Gbps [ 86.997076] ata1: hard resetting link [ 87.002972] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 87.007653] ata2: irq_stat 0x00000040, connection status changed [ 87.012159] ata2: SError: { CommWake DevExch } [ 87.016521] ata2: limiting SATA link speed to 1.5 Gbps [ 87.020933] ata2: hard resetting link [ 89.228566] ata1: SATA link down (SStatus 1 SControl 310) [ 89.240921] ata1: EH complete [ 89.252900] ata2: SATA link down (SStatus 1 SControl 310) [ 89.265080] ata2: EH complete [ 89.278120] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 89.283575] ata1: irq_stat 0x00000040, connection status changed [ 89.288880] ata1: SError: { CommWake DevExch } [ 89.294038] ata1: limiting SATA link speed to 1.5 Gbps [ 89.299268] ata1: hard resetting link [ 89.305101] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 89.309805] ata2: irq_stat 0x00000040, connection status changed [ 89.314335] ata2: SError: { CommWake DevExch } [ 89.318711] ata2: limiting SATA link speed to 1.5 Gbps [ 89.323176] ata2: hard resetting link [ 91.531568] ata1: SATA link down (SStatus 1 SControl 310) [ 91.543970] ata1: EH complete [ 91.555887] ata2: SATA link down (SStatus 1 SControl 310) [ 91.568071] ata2: EH complete [ 91.569564] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 91.569567] ata2: irq_stat 0x00000040, connection status changed [ 91.569574] ata2: SError: { CommWake DevExch } [ 91.569588] ata2: limiting SATA link speed to 1.5 Gbps [ 91.569596] ata2: hard resetting link [ 91.569626] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 91.569629] ata1: irq_stat 0x00000040, connection status changed [ 91.569635] ata1: SError: { CommWake DevExch } [ 91.569645] ata1: limiting SATA link speed to 1.5 Gbps [ 91.569649] ata1: hard resetting link [ 93.774393] ata2: SATA link down (SStatus 1 SControl 310) [ 93.786521] ata2: EH complete [ 93.799569] ata1: SATA link down (SStatus 1 SControl 310) [ 93.804698] ata1: EH complete [ 93.809877] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 93.815253] ata1: irq_stat 0x00000040, connection status changed [ 93.820511] ata1: SError: { CommWake DevExch } [ 93.825600] ata1: limiting SATA link speed to 1.5 Gbps [ 93.830751] ata1: hard resetting link [ 93.836528] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 93.841194] ata2: irq_stat 0x00000040, connection status changed [ 93.845679] ata2: SError: { CommWake DevExch } [ 93.849998] ata2: limiting SATA link speed to 1.5 Gbps [ 93.854379] ata2: hard resetting link [ 96.065337] ata1: SATA link down (SStatus 1 SControl 310) [ 96.077500] ata1: EH complete [ 96.089028] ata2: SATA link down (SStatus 1 SControl 310) [ 96.095342] ata2: EH complete [ 96.101326] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 96.107170] ata1: irq_stat 0x00000040, connection status changed [ 96.112415] ata1: SError: { CommWake DevExch } [ 96.117512] ata1: limiting SATA link speed to 1.5 Gbps [ 96.122675] ata1: hard resetting link [ 96.132920] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 96.136608] ata2: irq_stat 0x00000040, connection status changed [ 96.140100] ata2: SError: { CommWake DevExch } [ 96.143435] ata2: limiting SATA link speed to 1.5 Gbps [ 96.146826] ata2: hard resetting link [ 97.202434] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 98.336234] ata1: SATA link down (SStatus 1 SControl 310) [ 98.339194] ata1: EH complete [ 98.341871] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 98.344953] ata1: irq_stat 0x00000040, connection status changed [ 98.347970] ata1: SError: { CommWake DevExch } [ 98.350825] ata1: limiting SATA link speed to 1.5 Gbps [ 98.353734] ata1: hard resetting link [ 98.356527] ata2: SATA link down (SStatus 1 SControl 310) [ 98.359516] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 98.362674] ata2: irq_stat 0x00000040, connection status changed [ 98.365375] ata2: SError: { CommWake DevExch } [ 98.367830] ata2: limiting SATA link speed to 1.5 Gbps [ 98.370350] ata2: hard resetting link [ 100.575551] ata1: SATA link down (SStatus 1 SControl 310) [ 100.586760] ata1: EH complete [ 100.594976] ata2: SATA link down (SStatus 1 SControl 310) [ 100.603519] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3 [ 100.612436] ata2: irq_stat 0x00000040, connection status changed [ 100.621245] ata2: SError: { CommWake DevExch } [ 100.629874] ata2: limiting SATA link speed to 1.5 Gbps [ 100.638570] ata2: hard resetting link [ 100.647141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 100.653525] ata1: irq_stat 0x00000040, connection status changed [ 100.657598] ata1: SError: { CommWake DevExch } [ 100.661479] ata1: limiting SATA link speed to 1.5 Gbps [ 100.665408] ata1: hard resetting link [ 102.872632] ata2: SATA link down (SStatus 1 SControl 310) [ 102.885335] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t2 [ 102.898460] ata2: irq_stat 0x00000040, connection status changed [ 102.911239] ata2: SError: { CommWake DevExch } [ 102.923817] ata2: limiting SATA link speed to 1.5 Gbps [ 102.936506] ata2: hard resetting link [ 102.949720] ata1: SATA link down (SStatus 1 SControl 310) [ 102.962477] ata1: EH complete [ 102.976266] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 102.989268] ata1: irq_stat 0x00000040, connection status changed [ 103.002200] ata1: SError: { CommWake DevExch } [ 103.014810] ata1: limiting SATA link speed to 1.5 Gbps [ 103.027419] ata1: hard resetting link [ 105.165319] ata2: SATA link down (SStatus 1 SControl 310) [ 105.169412] ata2: EH complete [ 105.173217] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 105.177415] ata2: irq_stat 0x00000040, connection status changed [ 105.181463] ata2: SError: { CommWake DevExch } [ 105.185361] ata2: limiting SATA link speed to 1.5 Gbps [ 105.189316] ata2: hard resetting link [ 105.251244] ata1: SATA link down (SStatus 1 SControl 310) [ 105.255292] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 105.259452] ata1: irq_stat 0x00000040, connection status changed [ 105.263461] ata1: SError: { CommWake DevExch } [ 105.267289] ata1: limiting SATA link speed to 1.5 Gbps [ 105.271150] ata1: hard resetting link [ 105.942412] NFSD: starting 90-second grace period (net ffffff80092d8280) [ 107.398507] ata2: SATA link down (SStatus 1 SControl 310) [ 107.405087] ata2: EH complete [ 107.412367] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 107.419113] ata2: irq_stat 0x00000040, connection status changed [ 107.425742] ata2: SError: { CommWake DevExch } [ 107.432140] ata2: limiting SATA link speed to 1.5 Gbps [ 107.438632] ata2: hard resetting link [ 107.496556] ata1: SATA link down (SStatus 1 SControl 310) [ 107.509348] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3 [ 107.522220] ata1: irq_stat 0x00000040, connection status changed [ 107.535004] ata1: SError: { CommWake DevExch } [ 107.547484] ata1: limiting SATA link speed to 1.5 Gbps [ 107.559927] ata1: hard resetting link [ 109.650509] ata2: SATA link down (SStatus 1 SControl 310) [ 109.657059] ata2: EH complete [ 109.663373] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 109.670083] ata2: irq_stat 0x00000040, connection status changed [ 109.676679] ata2: SError: { CommWake DevExch } [ 109.683114] ata2: limiting SATA link speed to 1.5 Gbps [ 109.689618] ata2: hard resetting link [ 109.799557] ata1: SATA link down (SStatus 1 SControl 310) [ 109.812045] ata1: EH complete [ 109.824533] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 109.837127] ata1: irq_stat 0x00000040, connection status changed [ 109.849602] ata1: SError: { CommWake DevExch } [ 109.861888] ata1: limiting SATA link speed to 1.5 Gbps [ 109.874269] ata1: hard resetting link [ 111.900583] ata2: SATA link down (SStatus 1 SControl 310) [ 111.901503] ata2: EH complete [ 111.902071] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 111.903306] ata2: irq_stat 0x00000040, connection status changed [ 111.904233] ata2: SError: { CommWake DevExch } [ 111.904916] ata2: limiting SATA link speed to 1.5 Gbps [ 111.905718] ata2: hard resetting link [ 112.091470] ata1: SATA link down (SStatus 1 SControl 310) [ 112.092095] ata1: EH complete [ 112.092500] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 112.093282] ata1: irq_stat 0x00000040, connection status changed [ 112.093914] ata1: SError: { CommWake DevExch } [ 112.094404] ata1: limiting SATA link speed to 1.5 Gbps [ 112.094946] ata1: hard resetting link [ 114.111528] ata2: SATA link down (SStatus 1 SControl 310) [ 114.112446] ata2: EH complete [ 114.113035] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 114.114287] ata2: irq_stat 0x00000040, connection status changed [ 114.115183] ata2: SError: { CommWake DevExch } [ 114.115902] ata2: limiting SATA link speed to 1.5 Gbps [ 114.116777] ata2: hard resetting link [ 114.301641] ata1: SATA link down (SStatus 1 SControl 310) [ 114.302558] ata1: EH complete [ 114.303135] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 114.304296] ata1: irq_stat 0x00000040, connection status changed [ 114.305224] ata1: SError: { CommWake DevExch } [ 114.305907] ata1: limiting SATA link speed to 1.5 Gbps [ 114.306707] ata1: hard resetting link [ 116.322573] ata2: SATA link down (SStatus 1 SControl 310) [ 116.323490] ata2: EH complete [ 116.324069] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 116.336774] ata2: irq_stat 0x00000040, connection status changed [ 116.349299] ata2: SError: { CommWake DevExch } [ 116.361550] ata2: limiting SATA link speed to 1.5 Gbps [ 116.373799] ata2: hard resetting link [ 116.519559] ata1: SATA link down (SStatus 1 SControl 310) [ 116.531808] ata1: EH complete [ 116.545399] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 116.558146] ata1: irq_stat 0x00000040, connection status changed [ 116.570647] ata1: SError: { CommWake DevExch } [ 116.582863] ata1: limiting SATA link speed to 1.5 Gbps [ 116.595070] ata1: hard resetting link [ 118.610549] ata2: SATA link down (SStatus 1 SControl 310) [ 118.622788] ata2: EH complete [ 118.636591] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 118.649230] ata2: irq_stat 0x00000040, connection status changed [ 118.661649] ata2: SError: { CommWake DevExch } [ 118.673890] ata2: limiting SATA link speed to 1.5 Gbps [ 118.686068] ata2: hard resetting link [ 118.830597] ata1: SATA link down (SStatus 1 SControl 310) [ 118.842692] ata1: EH complete [ 118.855942] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 118.868247] ata1: irq_stat 0x00000040, connection status changed [ 118.880426] ata1: SError: { CommWake DevExch } [ 118.892413] ata1: limiting SATA link speed to 1.5 Gbps [ 118.904470] ata1: hard resetting link [ 120.920552] ata2: SATA link down (SStatus 1 SControl 310) [ 120.932675] ata2: EH complete [ 120.946035] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 120.958344] ata2: irq_stat 0x00000040, connection status changed [ 120.970558] ata2: SError: { CommWake DevExch } [ 120.982608] ata2: limiting SATA link speed to 1.5 Gbps [ 120.994689] ata2: hard resetting link [ 121.139481] ata1: SATA link down (SStatus 1 SControl 310) [ 121.143386] ata1: EH complete [ 121.147588] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 121.151633] ata1: irq_stat 0x00000040, connection status changed [ 121.155542] ata1: SError: { CommWake DevExch } [ 121.159296] ata1: limiting SATA link speed to 1.5 Gbps [ 121.163110] ata1: hard resetting link [ 123.212587] ata2: SATA link down (SStatus 1 SControl 310) [ 123.224795] ata2: EH complete [ 123.238382] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 123.250805] ata2: irq_stat 0x00000040, connection status changed [ 123.263089] ata2: SError: { CommWake DevExch } [ 123.275183] ata2: limiting SATA link speed to 1.5 Gbps [ 123.287325] ata2: hard resetting link [ 123.379484] ata1: SATA link down (SStatus 1 SControl 310) [ 123.383407] ata1: EH complete [ 123.387628] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 123.391692] ata1: irq_stat 0x00000040, connection status changed [ 123.395612] ata1: SError: { CommWake DevExch } [ 123.399376] ata1: limiting SATA link speed to 1.5 Gbps [ 123.403205] ata1: hard resetting link [ 125.504613] ata2: SATA link down (SStatus 1 SControl 310) [ 125.516920] ata2: EH complete [ 125.530328] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 125.542773] ata2: irq_stat 0x00000040, connection status changed [ 125.555051] ata2: SError: { CommWake DevExch } [ 125.567137] ata2: limiting SATA link speed to 1.5 Gbps [ 125.579279] ata2: hard resetting link [ 125.619491] ata1: SATA link down (SStatus 1 SControl 310) [ 125.623408] ata1: EH complete [ 125.627621] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 125.631679] ata1: irq_stat 0x00000040, connection status changed [ 125.635592] ata1: SError: { CommWake DevExch } [ 125.639353] ata1: limiting SATA link speed to 1.5 Gbps [ 125.643171] ata1: hard resetting link [ 127.796683] ata2: SATA link down (SStatus 1 SControl 310) [ 127.808892] ata2: EH complete [ 127.822371] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 127.834791] ata2: irq_stat 0x00000040, connection status changed [ 127.847069] ata2: SError: { CommWake DevExch } [ 127.859144] ata2: limiting SATA link speed to 1.5 Gbps [ 127.871272] ata2: hard resetting link [ 127.885951] ata1: SATA link down (SStatus 1 SControl 310) [ 127.898116] ata1: EH complete [ 127.909945] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 127.922345] ata1: irq_stat 0x00000040, connection status changed [ 127.934732] ata1: SError: { CommWake DevExch } [ 127.946945] ata1: limiting SATA link speed to 1.5 Gbps [ 127.959194] ata1: hard resetting link [ 130.100674] ata2: SATA link down (SStatus 1 SControl 310) [ 130.112891] ata2: EH complete [ 130.124719] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 130.137051] ata2: irq_stat 0x00000040, connection status changed [ 130.144780] ata2: SError: { CommWake DevExch } [ 130.148594] ata2: limiting SATA link speed to 1.5 Gbps [ 130.152440] ata2: hard resetting link [ 130.181494] ata1: SATA link down (SStatus 1 SControl 310) [ 130.185425] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 130.189514] ata1: irq_stat 0x00000040, connection status changed [ 130.193440] ata1: SError: { CommWake DevExch } [ 130.197228] ata1: limiting SATA link speed to 1.5 Gbps [ 130.201061] ata1: hard resetting link [ 132.360508] ata2: SATA link down (SStatus 1 SControl 310) [ 132.364460] ata2: EH complete [ 132.368104] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 132.372143] ata2: irq_stat 0x00000040, connection status changed [ 132.376066] ata2: SError: { CommWake DevExch } [ 132.379874] ata2: limiting SATA link speed to 1.5 Gbps [ 132.383732] ata2: hard resetting link [ 132.413501] ata1: SATA link down (SStatus 1 SControl 310) [ 132.417449] ata1: EH complete [ 132.421076] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 132.425107] ata1: irq_stat 0x00000040, connection status changed [ 132.429032] ata1: SError: { CommWake DevExch } [ 132.432814] ata1: limiting SATA link speed to 1.5 Gbps [ 132.436660] ata1: hard resetting link [ 134.592693] ata2: SATA link down (SStatus 1 SControl 310) [ 134.604975] ata2: EH complete [ 134.616823] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 134.626722] ata2: irq_stat 0x00000040, connection status changed [ 134.630648] ata2: SError: { CommWake DevExch } [ 134.634455] ata2: limiting SATA link speed to 1.5 Gbps [ 134.638310] ata2: hard resetting link [ 134.667507] ata1: SATA link down (SStatus 1 SControl 310) [ 134.671451] ata1: EH complete [ 134.675073] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 134.679097] ata1: irq_stat 0x00000040, connection status changed [ 134.683011] ata1: SError: { CommWake DevExch } [ 134.686786] ata1: limiting SATA link speed to 1.5 Gbps [ 134.690623] ata1: hard resetting link [ 136.846349] ata2: SATA link down (SStatus 1 SControl 310) [ 136.850294] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 136.854429] ata2: irq_stat 0x00000040, connection status changed [ 136.858405] ata2: SError: { CommWake DevExch } [ 136.862222] ata2: limiting SATA link speed to 1.5 Gbps [ 136.866091] ata2: hard resetting link [ 136.921423] ata1: SATA link down (SStatus 1 SControl 310) [ 136.925408] ata1: EH complete [ 136.929256] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 136.933345] ata1: irq_stat 0x00000040, connection status changed [ 136.937317] ata1: SError: { CommWake DevExch } [ 136.941114] ata1: limiting SATA link speed to 1.5 Gbps [ 136.945009] ata1: hard resetting link [ 139.075534] ata2: SATA link down (SStatus 1 SControl 310) [ 139.079481] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3 [ 139.083614] ata2: irq_stat 0x00000040, connection status changed [ 139.087558] ata2: SError: { CommWake DevExch } [ 139.091338] ata2: limiting SATA link speed to 1.5 Gbps [ 139.095191] ata2: hard resetting link [ 139.176349] ata1: SATA link down (SStatus 1 SControl 310) [ 139.180309] ata1: EH complete [ 139.185760] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 139.198215] ata1: irq_stat 0x00000040, connection status changed [ 139.210490] ata1: SError: { CommWake DevExch } [ 139.222535] ata1: limiting SATA link speed to 1.5 Gbps [ 139.228091] ata1: hard resetting link [ 141.305300] ata2: SATA link down (SStatus 1 SControl 310) [ 141.309282] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t2 [ 141.313417] ata2: irq_stat 0x00000040, connection status changed [ 141.317406] ata2: SError: { CommWake DevExch } [ 141.321206] ata2: limiting SATA link speed to 1.5 Gbps [ 141.325080] ata2: hard resetting link [ 141.459357] ata1: SATA link down (SStatus 1 SControl 310) [ 141.463339] ata1: EH complete [ 141.467668] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 141.471787] ata1: irq_stat 0x00000040, connection status changed [ 141.475738] ata1: SError: { CommWake DevExch } [ 141.479506] ata1: limiting SATA link speed to 1.5 Gbps [ 141.483326] ata1: hard resetting link [ 143.534644] ata2: SATA link down (SStatus 1 SControl 310) [ 143.546997] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t1 [ 143.559682] ata2: irq_stat 0x00000040, connection status changed [ 143.572312] ata2: SError: { CommWake DevExch } [ 143.584630] ata2: limiting SATA link speed to 1.5 Gbps [ 143.596961] ata2: hard resetting link [ 143.713533] ata1: SATA link down (SStatus 1 SControl 310) [ 143.717514] ata1: EH complete [ 143.721845] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 143.725962] ata1: irq_stat 0x00000040, connection status changed [ 143.729917] ata1: SError: { CommWake DevExch } [ 143.733686] ata1: limiting SATA link speed to 1.5 Gbps [ 143.737509] ata1: hard resetting link [ 145.813655] ata2: SATA link down (SStatus 1 SControl 310) [ 145.825995] ata2: EH pending after 5 tries, giving up [ 145.838219] ata2: EH complete [ 145.968539] ata1: SATA link down (SStatus 1 SControl 310) [ 145.972482] ata1: EH complete [ 145.976725] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 145.980774] ata1: irq_stat 0x00000040, connection status changed [ 145.984690] ata1: SError: { CommWake DevExch } [ 145.988456] ata1: limiting SATA link speed to 1.5 Gbps [ 145.992280] ata1: hard resetting link [ 148.200734] ata1: SATA link down (SStatus 1 SControl 310) [ 148.212844] ata1: EH complete [ 148.226320] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 148.231235] ata1: irq_stat 0x00000040, connection status changed [ 148.235154] ata1: SError: { CommWake DevExch } [ 148.238911] ata1: limiting SATA link speed to 1.5 Gbps [ 148.242731] ata1: hard resetting link [ 150.451657] ata1: SATA link down (SStatus 1 SControl 310) [ 150.463800] ata1: EH complete [ 150.477237] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 150.489589] ata1: irq_stat 0x00000040, connection status changed [ 150.501839] ata1: SError: { CommWake DevExch } [ 150.513873] ata1: limiting SATA link speed to 1.5 Gbps [ 150.525873] ata1: hard resetting link [ 152.743732] ata1: SATA link down (SStatus 1 SControl 310) [ 152.755777] ata1: EH complete [ 152.768925] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 152.781303] ata1: irq_stat 0x00000040, connection status changed [ 152.793532] ata1: SError: { CommWake DevExch } [ 152.805554] ata1: limiting SATA link speed to 1.5 Gbps [ 152.813745] ata1: hard resetting link [ 155.022744] ata1: SATA link down (SStatus 1 SControl 310) [ 155.034804] ata1: EH complete [ 155.048224] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 155.060617] ata1: irq_stat 0x00000040, connection status changed [ 155.072858] ata1: SError: { CommWake DevExch } [ 155.084776] ata1: limiting SATA link speed to 1.5 Gbps [ 155.093259] ata1: hard resetting link [ 157.301754] ata1: SATA link down (SStatus 1 SControl 310) [ 157.313797] ata1: EH complete [ 157.327192] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 157.339501] ata1: irq_stat 0x00000040, connection status changed [ 157.351716] ata1: SError: { CommWake DevExch } [ 157.363617] ata1: limiting SATA link speed to 1.5 Gbps [ 157.375494] ata1: hard resetting link [ 159.592760] ata1: SATA link down (SStatus 1 SControl 310) [ 159.604812] ata1: EH complete [ 159.618020] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 159.630357] ata1: irq_stat 0x00000040, connection status changed [ 159.642570] ata1: SError: { CommWake DevExch } [ 159.654615] ata1: limiting SATA link speed to 1.5 Gbps [ 159.666729] ata1: hard resetting link [ 161.884762] ata1: SATA link down (SStatus 1 SControl 310) [ 161.897017] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 [ 161.909461] ata1: irq_stat 0x00000040, connection status changed [ 161.921699] ata1: SError: { CommWake DevExch } [ 161.929551] ata1: limiting SATA link speed to 1.5 Gbps [ 161.933385] ata1: hard resetting link [ 164.141767] ata1: SATA link down (SStatus 1 SControl 310) [ 164.154125] ata1: EH complete [ 164.167564] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 164.179989] ata1: irq_stat 0x00000040, connection status changed [ 164.192319] ata1: SError: { CommWake DevExch } [ 164.204405] ata1: limiting SATA link speed to 1.5 Gbps [ 164.216584] ata1: hard resetting link [ 166.433687] ata1: SATA link down (SStatus 1 SControl 310) [ 166.446094] ata1: EH complete [ 166.459640] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 166.472082] ata1: irq_stat 0x00000040, connection status changed [ 166.484370] ata1: SError: { CommWake DevExch } [ 166.496468] ata1: limiting SATA link speed to 1.5 Gbps [ 166.508665] ata1: hard resetting link [ 168.725440] ata1: SATA link down (SStatus 1 SControl 310) [ 168.737809] ata1: EH complete [ 168.751410] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 168.763869] ata1: irq_stat 0x00000040, connection status changed [ 168.776178] ata1: SError: { CommWake DevExch } [ 168.788286] ata1: limiting SATA link speed to 1.5 Gbps [ 168.800501] ata1: hard resetting link [ 171.017700] ata1: SATA link down (SStatus 1 SControl 310) [ 171.030123] ata1: EH complete [ 171.043801] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 171.056275] ata1: irq_stat 0x00000040, connection status changed [ 171.068599] ata1: SError: { CommWake DevExch } [ 171.080728] ata1: limiting SATA link speed to 1.5 Gbps [ 171.092942] ata1: hard resetting link [ 173.311725] ata1: SATA link down (SStatus 1 SControl 310) [ 173.324118] ata1: EH complete [ 173.330586] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 173.334673] ata1: irq_stat 0x00000040, connection status changed [ 173.338625] ata1: SError: { CommWake DevExch } [ 173.342456] ata1: limiting SATA link speed to 1.5 Gbps [ 173.346330] ata1: hard resetting link [ 175.554792] ata1: SATA link down (SStatus 1 SControl 310) [ 175.567151] ata1: EH complete [ 175.579047] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 175.585854] ata1: irq_stat 0x00000040, connection status changed [ 175.589800] ata1: SError: { CommWake DevExch } [ 175.593626] ata1: limiting SATA link speed to 1.5 Gbps [ 175.597494] ata1: hard resetting link [ 177.805905] ata1: SATA link down (SStatus 1 SControl 310) [ 177.818144] ata1: EH complete [ 177.830037] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 177.838648] ata1: irq_stat 0x00000040, connection status changed [ 177.847188] ata1: SError: { CommWake DevExch } [ 177.855607] ata1: limiting SATA link speed to 1.5 Gbps [ 177.863718] ata1: hard resetting link [ 180.072432] ata1: SATA link down (SStatus 1 SControl 310) [ 180.084642] ata1: EH complete [ 180.096411] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 180.104552] ata1: irq_stat 0x00000040, connection status changed [ 180.108494] ata1: SError: { CommWake DevExch } [ 180.112309] ata1: limiting SATA link speed to 1.5 Gbps [ 180.116178] ata1: hard resetting link [ 182.324833] ata1: SATA link down (SStatus 1 SControl 310) [ 182.337039] ata1: EH complete [ 182.348941] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 182.361290] ata1: irq_stat 0x00000040, connection status changed [ 182.373601] ata1: SError: { CommWake DevExch } [ 182.385755] ata1: limiting SATA link speed to 1.5 Gbps [ 182.397958] ata1: hard resetting link [ 184.614731] ata1: SATA link down (SStatus 1 SControl 310) [ 184.626959] ata1: EH complete [ 184.638883] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 184.651223] ata1: irq_stat 0x00000040, connection status changed [ 184.663580] ata1: SError: { CommWake DevExch } [ 184.675727] ata1: limiting SATA link speed to 1.5 Gbps [ 184.687919] ata1: hard resetting link [ 186.904815] ata1: SATA link down (SStatus 1 SControl 310) [ 186.917011] ata1: EH complete [ 186.928724] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 186.941049] ata1: irq_stat 0x00000040, connection status changed [ 186.946559] ata1: SError: { CommWake DevExch } [ 186.950372] ata1: limiting SATA link speed to 1.5 Gbps [ 186.954220] ata1: hard resetting link