[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.171-gd6d71979 (root@rockpro64) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04) ) #1 SMP Fri May 24 17:28:24 IST 2019
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 15864 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 1015296 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ed4000 s46056 r8192 d31768 u86016
[    0.000000] pcpu-alloc: s46056 r8192 d31768 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 root=UUID=186ed216-e6cd-4e65-b1ee-ebba8376bc90 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 panic=10 consoleblank=0 loglevel=1 ubootpart=224e645e-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e8c000-0xf7ecc000] (0MB)
[    0.000000] Memory: 3960320K/4061184K available (11710K kernel code, 1704K rwdata, 4676K rodata, 1088K init, 722K bss, 100864K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
                   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
                     .init : 0xffffff8009090000 - 0xffffff80091a0000   (  1088 KB)
                     .text : 0xffffff8008080000 - 0xffffff8008bf0000   ( 11712 KB)
                   .rodata : 0xffffff8008bf0000 - 0xffffff8009090000   (  4736 KB)
                     .data : 0xffffff80091a0000 - 0xffffff800934a008   (  1705 KB)
                   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
                             0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
                   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
                   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
                   memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x0000000000290000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000002a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001427] Console: colour dummy device 80x25
[    0.001440] console [tty1] enabled
[    0.001448] bootconsole [uart0] disabled
[    0.001472] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.001484] pid_max: default: 32768 minimum: 301
[    0.001629] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001642] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002419] Initializing cgroup subsys memory
[    0.002452] Initializing cgroup subsys devices
[    0.002466] Initializing cgroup subsys freezer
[    0.002484] Initializing cgroup subsys net_cls
[    0.002497] Initializing cgroup subsys net_prio
[    0.002524] ftrace: allocating 44268 entries in 173 pages
[    0.115299] sched-energy: Sched-energy-costs installed from DT
[    0.115316] CPU0: update cpu_capacity 401
[    0.115376] ASID allocator initialised with 32768 entries
[    0.119079] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.119620] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.120992] Detected VIPT I-cache on CPU1
[    0.121024] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.121054] CPU1: using LPI pending table @0x00000000f2530000
[    0.121095] CPU1: update cpu_capacity 401
[    0.121099] CPU1: Booted secondary processor [410fd034]
[    0.121636] Detected VIPT I-cache on CPU2
[    0.121657] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.121684] CPU2: using LPI pending table @0x00000000f2560000
[    0.121711] CPU2: update cpu_capacity 401
[    0.121714] CPU2: Booted secondary processor [410fd034]
[    0.122237] Detected VIPT I-cache on CPU3
[    0.122257] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.122284] CPU3: using LPI pending table @0x00000000f25b0000
[    0.122310] CPU3: update cpu_capacity 401
[    0.122313] CPU3: Booted secondary processor [410fd034]
[    0.122855] Detected PIPT I-cache on CPU4
[    0.122884] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.122923] CPU4: using LPI pending table @0x00000000f25f0000
[    0.122960] CPU4: update cpu_capacity 1024
[    0.122964] CPU4: Booted secondary processor [410fd082]
[    0.123514] Detected PIPT I-cache on CPU5
[    0.123534] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.123570] CPU5: using LPI pending table @0x00000000f2620000
[    0.123595] CPU5: update cpu_capacity 1024
[    0.123598] CPU5: Booted secondary processor [410fd082]
[    0.123699] Brought up 6 CPUs
[    0.123782] SMP: Total of 6 processors activated.
[    0.123790] CPU features: detected feature: GIC system register CPU interface
[    0.123798] CPU features: detected feature: 32-bit EL0 Support
[    0.123810] CPU: All CPU(s) started at EL2
[    0.123856] alternatives: patching kernel code
[    0.125289] devtmpfs: initialized
[    0.142248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.142276] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.142736] xor: measuring software checksum speed
[    0.151808]    8regs     :  2860.000 MB/sec
[    0.161869]    8regs_prefetch:  2568.000 MB/sec
[    0.171926]    32regs    :  3200.000 MB/sec
[    0.181983]    32regs_prefetch:  2848.000 MB/sec
[    0.181990] xor: using function: 32regs (3200.000 MB/sec)
[    0.182016] pinctrl core: initialized pinctrl subsystem
[    0.182244] regulator-dummy: no parameters
[    0.184013] NET: Registered protocol family 16
[    0.189072] cpuidle: using governor ladder
[    0.193086] cpuidle: using governor menu
[    0.193420] vdso: 2 pages (1 code @ ffffff8008bf6000, 1 data @ ffffff80091a4000)
[    0.193448] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.194501] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.210037] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
[    0.210116] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
[    0.210186] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
[    0.210272] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
[    0.210345] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
[    0.248483] raid6: int64x1  gen()   453 MB/s
[    0.265566] raid6: int64x1  xor()   361 MB/s
[    0.282643] raid6: int64x2  gen()   812 MB/s
[    0.299728] raid6: int64x2  xor()   603 MB/s
[    0.316786] raid6: int64x4  gen()  1074 MB/s
[    0.333889] raid6: int64x4  xor()   673 MB/s
[    0.350975] raid6: int64x8  gen()   859 MB/s
[    0.368082] raid6: int64x8  xor()   636 MB/s
[    0.385184] raid6: neonx1   gen()   925 MB/s
[    0.402296] raid6: neonx1   xor()   625 MB/s
[    0.419392] raid6: neonx2   gen()  1605 MB/s
[    0.436481] raid6: neonx2   xor()   996 MB/s
[    0.453563] raid6: neonx4   gen()  2113 MB/s
[    0.470660] raid6: neonx4   xor()  1220 MB/s
[    0.487786] raid6: neonx8   gen()  1699 MB/s
[    0.504875] raid6: neonx8   xor()  1269 MB/s
[    0.504881] raid6: using algorithm neonx4 gen() 2113 MB/s
[    0.504887] raid6: .... xor() 1220 MB/s, rmw enabled
[    0.504892] raid6: using intx1 recovery algorithm
[    0.505428] ACPI: Interpreter disabled.
[    0.505955] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
[    0.505995] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
[    0.506280] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
[    0.506301] dc_12v: 12000 mV 
[    0.506480] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
[    0.506533] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[    0.506551] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
[    0.506598] vcc_sys: supplied by dc_12v
[    0.506607] dc_12v: could not add device link regulator.2 err -2
[    0.506646] vcc_sys: 5000 mV 
[    0.506792] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[    0.506840] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[    0.506856] vcc_phy: no parameters
[    0.506998] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[    0.507054] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
[    0.507071] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
[    0.507105] vcc3v3_sys: supplied by vcc_sys
[    0.507113] vcc_sys: could not add device link regulator.4 err -2
[    0.507151] vcc3v3_sys: 3300 mV 
[    0.507293] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[    0.507460] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
[    0.507518] vcc5v0_host: no parameters
[    0.507675] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
[    0.507733] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]'
[    0.507754] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.507769] vcc1v8_sdio: unable to resolve supply
[    0.507778] vcc1v8_sdio: 1800 mV 
[    0.507894] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.507909] vcc1v8_sdio: regulator get failed, ret=-517
[    0.507920] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.507933] vcc1v8_sdio: unable to resolve supply
[    0.507941] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV
[    0.508048] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-wifi[0]'
[    0.508065] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.508080] vcc1v8_wifi: unable to resolve supply
[    0.508087] vcc1v8_wifi: no parameters
[    0.508207] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.508223] vcc1v8_wifi: regulator get failed, ret=-517
[    0.508233] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.508246] vcc1v8_sdio: unable to resolve supply
[    0.508253] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.508266] vcc1v8_wifi: unable to resolve supply
[    0.508274] reg-fixed-voltage vcc1v8-wifi: vcc1v8_wifi supplying 0uV
[    0.508398] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc12v-pcie-regulator[0]' - status (0)
[    0.508435] reg-fixed-voltage vcc12v-pcie-regulator: Looking up vin-supply from device tree
[    0.508469] vcc12v_pcie: supplied by dc_12v
[    0.508478] dc_12v: could not add device link regulator.8 err -2
[    0.508520] vcc12v_pcie: 12000 mV 
[    0.508682] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.508698] vcc1v8_sdio: unable to resolve supply
[    0.508705] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.508718] vcc1v8_wifi: unable to resolve supply
[    0.508727] reg-fixed-voltage vcc12v-pcie-regulator: vcc12v_pcie supplying 12000000uV
[    0.508782] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-pcie-regulator[0]'
[    0.508798] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
[    0.508832] vcc3v3_pcie: supplied by vcc3v3_sys
[    0.508840] vcc3v3_sys: could not add device link regulator.9 err -2
[    0.508867] vcc3v3_pcie: 3300 mV 
[    0.509011] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.509026] vcc1v8_sdio: unable to resolve supply
[    0.509034] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.509047] vcc1v8_wifi: unable to resolve supply
[    0.509056] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
[    0.509105] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-pcie[0]'
[    0.509121] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    0.509135] vcc1v8_pcie: unable to resolve supply
[    0.509142] vcc1v8_pcie: 1800 mV 
[    0.509273] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    0.509289] vcc1v8_pcie: regulator get failed, ret=-517
[    0.509299] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.509313] vcc1v8_sdio: unable to resolve supply
[    0.509321] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.509334] vcc1v8_wifi: unable to resolve supply
[    0.509343] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    0.509356] vcc1v8_pcie: unable to resolve supply
[    0.509364] reg-fixed-voltage vcc1v8-pcie: vcc1v8_pcie supplying 1800000uV
[    0.509413] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc0v9-pcie[0]'
[    0.509428] reg-fixed-voltage vcc0v9-pcie: Looking up vin-supply from device tree
[    0.509464] vcc0v9_pcie: supplied by vcc3v3_sys
[    0.509472] vcc3v3_sys: could not add device link regulator.11 err -2
[    0.509509] vcc0v9_pcie: 900 mV 
[    0.509658] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.509675] vcc1v8_sdio: unable to resolve supply
[    0.509682] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.509696] vcc1v8_wifi: unable to resolve supply
[    0.509704] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    0.509718] vcc1v8_pcie: unable to resolve supply
[    0.509727] reg-fixed-voltage vcc0v9-pcie: vcc0v9_pcie supplying 900000uV
[    0.510401] iommu: Adding device ff650000.vpu_service to group 0
[    0.510481] iommu: Adding device ff660000.rkvdec to group 1
[    0.510572] iommu: Adding device ff670000.iep to group 2
[    0.510682] iommu: Adding device ff8f0000.vop to group 3
[    0.510773] iommu: Adding device ff900000.vop to group 4
[    0.511621] rk_iommu ff670800.iommu: can't get aclk
[    0.511632] rk_iommu ff670800.iommu: can't get hclk
[    0.512332] SCSI subsystem initialized
[    0.512502] libata version 3.00 loaded.
[    0.512692] usbcore: registered new interface driver usbfs
[    0.512733] usbcore: registered new interface driver hub
[    0.512811] usbcore: registered new device driver usb
[    0.512876] media: Linux media interface: v0.10
[    0.512910] Linux video capture interface: v2.00
[    0.513012] pps_core: LinuxPPS API ver. 1 registered
[    0.513018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.513034] PTP clock support registered
[    0.514286] Advanced Linux Sound Architecture Driver Initialized.
[    0.514807] Bluetooth: Core ver 2.21
[    0.514834] NET: Registered protocol family 31
[    0.514840] Bluetooth: HCI device and connection manager initialized
[    0.514852] Bluetooth: HCI socket layer initialized
[    0.514860] Bluetooth: L2CAP socket layer initialized
[    0.514883] Bluetooth: SCO socket layer initialized
[    0.516061] clocksource: Switched to clocksource arch_sys_counter
[    0.557235] FS-Cache: Loaded
[    0.557429] pnp: PnP ACPI: disabled
[    0.565961] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.566204] NET: Registered protocol family 2
[    0.566639] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.566900] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.567731] TCP: Hash tables configured (established 32768 bind 32768)
[    0.567846] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.568009] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.568416] NET: Registered protocol family 1
[    0.568745] RPC: Registered named UNIX socket transport module.
[    0.568752] RPC: Registered udp transport module.
[    0.568758] RPC: Registered tcp transport module.
[    0.568763] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.569026] PCI: CLS 0 bytes, default 64
[    0.569648] Trying to unpack rootfs image as initramfs...
[    0.910189] Freeing initrd memory: 7064K
[    0.910764] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.910855] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.914303] Initialise system trusted keyring
[    0.922496] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.923273] NFS: Registering the id_resolver key type
[    0.923298] Key type id_resolver registered
[    0.923304] Key type id_legacy registered
[    0.923324] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.923998] fuse init (API version 7.23)
[    0.924391] SGI XFS with security attributes, no debug enabled
[    0.925911] aufs 4.4-20170911
[    0.929999] NET: Registered protocol family 38
[    0.930020] async_tx: api initialized (async)
[    0.930036] Key type asymmetric registered
[    0.930046] Asymmetric key parser 'x509' registered
[    0.930222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.930235] io scheduler noop registered
[    0.930245] io scheduler deadline registered
[    0.930372] io scheduler cfq registered (default)
[    0.931436] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
[    0.931447] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[    0.931734] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree
[    0.931744] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[    0.931760] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
[    0.931900] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
[    0.931990] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
[    0.933528] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
[    0.933539] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
[    0.934704] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
[    0.934715] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
[    0.934821] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
[    0.934830] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
[    0.937201] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
[    0.937215] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
[    0.937233] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    0.937465] rk-vcodec ff650000.vpu_service: probe device
[    0.937689] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    0.938251] rk-vcodec ff650000.vpu_service: init success
[    0.938461] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
[    0.938471] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
[    0.938487] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    0.938891] rk-vcodec ff660000.rkvdec: probe device
[    0.939095] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    0.939474] rk-vcodec ff660000.rkvdec: could not find power_model node
[    0.939482] rk-vcodec ff660000.rkvdec: init success
[    0.941306] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.941317] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.942769] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.942779] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.943196] pwm-regulator vdd-log: GPIO lookup for consumer enable
[    0.943205] pwm-regulator vdd-log: using device tree for GPIO lookup
[    0.943215] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
[    0.943224] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
[    0.943232] pwm-regulator vdd-log: using lookup tables for GPIO lookup
[    0.943240] pwm-regulator vdd-log: lookup for GPIO enable failed
[    0.943267] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    0.943347] pwm-regulator: supplied by vcc_sys
[    0.943356] vcc_sys: could not add device link regulator.12 err -2
[    0.943427] vdd_log: 800 <--> 1400 mV at 896 mV 
[    0.943635] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    0.943655] vcc1v8_sdio: unable to resolve supply
[    0.943664] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    0.943681] vcc1v8_wifi: unable to resolve supply
[    0.943690] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    0.943706] vcc1v8_pcie: unable to resolve supply
[    0.944170] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.945846] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    0.946493] console [ttyS2] disabled
[    0.946527] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.947267] console [ttyS2] enabled
[    0.948411] [drm] Initialized drm 1.1.0 20060810
[    0.952604] [drm] Rockchip DRM driver version: v1.0.1
[    0.953162] usbcore: registered new interface driver udl
[    0.954894] Unable to detect cache hierarchy for CPU 0
[    0.955625] brd: module loaded
[    0.960805] loop: module loaded
[    0.961405] zram: Added device: zram0
[    0.961778] lkdtm: No crash points registered, enable through debugfs
[    0.962967] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    0.963901] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.963907] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.963956] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.963961] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.964006] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.964011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.964077] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    0.964082] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.964127] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    0.964132] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    0.964970] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
[    0.965045] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    0.965077] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    0.965086] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    0.965108] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    0.965276] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    0.970290] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    0.970409] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.970414]  Ring mode enabled
[    0.970420]  DMA HW capability register supported
[    0.970424]  Normal descriptors
[    0.970430]  RX Checksum Offload Engine supported (type 2)
[    0.970435]  TX Checksum insertion supported
[    0.970439]  Wake-Up On Lan supported
[    0.970479]  Enable RX Mitigation via HW Watchdog Timer
[    0.970580] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
[    1.040493] libphy: stmmac: probed
[    1.040506] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    1.040514] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    1.041932] usbcore: registered new interface driver rtl8150
[    1.041970] usbcore: registered new interface driver r8152
[    1.042016] usbcore: registered new interface driver asix
[    1.042068] usbcore: registered new interface driver ax88179_178a
[    1.042110] usbcore: registered new interface driver cdc_ether
[    1.042147] usbcore: registered new interface driver rndis_host
[    1.042205] usbcore: registered new interface driver cdc_ncm
[    1.042241] usbcore: registered new interface driver cdc_mbim
[    1.043676] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    1.047962] rockchip-dwc3 usb1: fail to get drvdata hcd
[    1.049285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.049302] ehci-pci: EHCI PCI platform driver
[    1.049363] ehci-platform: EHCI generic platform driver
[    1.053088] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.053274] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.053385] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.059084] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.059253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.059263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059271] usb usb1: Product: EHCI Host Controller
[    1.059279] usb usb1: Manufacturer: Linux 4.4.171-gd6d71979 ehci_hcd
[    1.059286] usb usb1: SerialNumber: fe3c0000.usb
[    1.059933] hub 1-0:1.0: USB hub found
[    1.059979] hub 1-0:1.0: 1 port detected
[    1.061021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.061078] ohci-platform: OHCI generic platform driver
[    1.061894] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.062130] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.062300] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.117232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.117241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.117249] usb usb2: Product: Generic Platform OHCI controller
[    1.117256] usb usb2: Manufacturer: Linux 4.4.171-gd6d71979 ohci_hcd
[    1.117263] usb usb2: SerialNumber: fe3e0000.usb
[    1.117705] hub 2-0:1.0: USB hub found
[    1.117736] hub 2-0:1.0: 1 port detected
[    1.118722] usbcore: registered new interface driver cdc_wdm
[    1.118771] usbcore: registered new interface driver uas
[    1.118849] usbcore: registered new interface driver usb-storage
[    1.118886] usbcore: registered new interface driver ums-alauda
[    1.118921] usbcore: registered new interface driver ums-cypress
[    1.118956] usbcore: registered new interface driver ums-datafab
[    1.118991] usbcore: registered new interface driver ums_eneub6250
[    1.119025] usbcore: registered new interface driver ums-freecom
[    1.119082] usbcore: registered new interface driver ums-isd200
[    1.119119] usbcore: registered new interface driver ums-jumpshot
[    1.119154] usbcore: registered new interface driver ums-karma
[    1.119189] usbcore: registered new interface driver ums-onetouch
[    1.119233] usbcore: registered new interface driver ums-realtek
[    1.119268] usbcore: registered new interface driver ums-sddr09
[    1.119303] usbcore: registered new interface driver ums-sddr55
[    1.119341] usbcore: registered new interface driver ums-usbat
[    1.119417] usbcore: registered new interface driver usbserial
[    1.119451] usbcore: registered new interface driver usbserial_generic
[    1.119479] usbserial: USB Serial support registered for generic
[    1.119517] usbcore: registered new interface driver cp210x
[    1.119544] usbserial: USB Serial support registered for cp210x
[    1.119598] usbcore: registered new interface driver ftdi_sio
[    1.119626] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.119715] usbcore: registered new interface driver keyspan
[    1.119740] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.119765] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.119790] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.119815] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.119854] usbcore: registered new interface driver option
[    1.119881] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.119992] usbcore: registered new interface driver oti6858
[    1.120017] usbserial: USB Serial support registered for oti6858
[    1.120070] usbcore: registered new interface driver pl2303
[    1.120096] usbserial: USB Serial support registered for pl2303
[    1.120139] usbcore: registered new interface driver qcserial
[    1.120165] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.120214] usbcore: registered new interface driver sierra
[    1.120242] usbserial: USB Serial support registered for Sierra USB modem
[    1.121070] usbcore: registered new interface driver iforce
[    1.121136] usbcore: registered new interface driver xpad
[    1.121497] usbcore: registered new interface driver usbtouchscreen
[    1.122261] i2c /dev entries driver
[    1.123145] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
[    1.123154] fan53555-regulator 0-0040: using device tree for GPIO lookup
[    1.123184] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
[    1.123555] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.123572] fan53555-regulator 0-0040: Looking up vin-supply from device tree
[    1.123620] fan53555-reg: supplied by vcc_sys
[    1.123629] vcc_sys: could not add device link regulator.13 err -2
[    1.124983] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV 
[    1.125373] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.125395] vcc1v8_sdio: unable to resolve supply
[    1.125404] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.125421] vcc1v8_wifi: unable to resolve supply
[    1.125431] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.125447] vcc1v8_pcie: unable to resolve supply
[    1.125677] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
[    1.125685] fan53555-regulator 0-0041: using device tree for GPIO lookup
[    1.125711] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
[    1.126071] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.126089] fan53555-regulator 0-0041: Looking up vin-supply from device tree
[    1.126128] fan53555-reg: supplied by vcc_sys
[    1.126137] vcc_sys: could not add device link regulator.14 err -2
[    1.127623] vdd_gpu: 712 <--> 1500 mV at 1000 mV 
[    1.127977] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.127997] vcc1v8_sdio: unable to resolve supply
[    1.128005] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.128021] vcc1v8_wifi: unable to resolve supply
[    1.128030] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.128061] vcc1v8_pcie: unable to resolve supply
[    1.128629] rk808 0-001b: Pmic Chip id: 0x0
[    1.131614] rk808 0-001b: GPIO lookup for consumer dvs
[    1.131622] rk808 0-001b: using device tree for GPIO lookup
[    1.131632] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
[    1.131641] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[    1.131649] rk808 0-001b: using lookup tables for GPIO lookup
[    1.131656] rk808 0-001b: lookup for GPIO dvs failed
[    1.131664] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.131672] rk808 0-001b: GPIO lookup for consumer dvs
[    1.131678] rk808 0-001b: using device tree for GPIO lookup
[    1.131686] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
[    1.131694] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
[    1.131701] rk808 0-001b: using lookup tables for GPIO lookup
[    1.131708] rk808 0-001b: lookup for GPIO dvs failed
[    1.131716] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.131755] rk808 0-001b: Looking up vcc1-supply from device tree
[    1.131804] DCDC_REG1: supplied by vcc_sys
[    1.131813] vcc_sys: could not add device link regulator.15 err -2
[    1.132254] vdd_center: 900 mV 
[    1.132477] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.132497] vcc1v8_sdio: unable to resolve supply
[    1.132505] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.132522] vcc1v8_wifi: unable to resolve supply
[    1.132531] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.132548] vcc1v8_pcie: unable to resolve supply
[    1.132591] rk808 0-001b: Looking up vcc2-supply from device tree
[    1.132626] DCDC_REG2: supplied by vcc_sys
[    1.132634] vcc_sys: could not add device link regulator.16 err -2
[    1.132924] vdd_cpu_l: 750 <--> 1350 mV at 900 mV 
[    1.133155] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.133174] vcc1v8_sdio: unable to resolve supply
[    1.133182] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.133199] vcc1v8_wifi: unable to resolve supply
[    1.133207] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.133224] vcc1v8_pcie: unable to resolve supply
[    1.133263] rk808 0-001b: Looking up vcc3-supply from device tree
[    1.133297] DCDC_REG3: supplied by vcc_sys
[    1.133305] vcc_sys: could not add device link regulator.17 err -2
[    1.133334] vcc_ddr: at 5000 mV 
[    1.133516] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.133536] vcc1v8_sdio: unable to resolve supply
[    1.133544] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.133561] vcc1v8_wifi: unable to resolve supply
[    1.133569] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.133586] vcc1v8_pcie: unable to resolve supply
[    1.133632] rk808 0-001b: Looking up vcc4-supply from device tree
[    1.133666] DCDC_REG4: supplied by vcc_sys
[    1.133674] vcc_sys: could not add device link regulator.18 err -2
[    1.133848] vcc_1v8: 1800 mV 
[    1.134064] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
[    1.134084] vcc1v8_sdio: supplied by vcc_1v8
[    1.134130] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
[    1.134149] vcc1v8_wifi: supplied by vcc_1v8
[    1.134183] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.134201] vcc1v8_pcie: unable to resolve supply
[    1.134247] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.134282] LDO_REG1: supplied by vcc_sys
[    1.134289] vcc_sys: could not add device link regulator.19 err -2
[    1.135124] vcc1v8_dvp: 1800 mV 
[    1.135333] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.135354] vcc1v8_pcie: unable to resolve supply
[    1.135399] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.135433] LDO_REG2: supplied by vcc_sys
[    1.135441] vcc_sys: could not add device link regulator.20 err -2
[    1.136135] vcc3v0_touch: 3000 mV 
[    1.136335] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.136357] vcc1v8_pcie: unable to resolve supply
[    1.136403] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.136436] LDO_REG3: supplied by vcc_sys
[    1.136444] vcc_sys: could not add device link regulator.21 err -2
[    1.137147] vcca_1v8: 1800 mV 
[    1.137345] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
[    1.137366] vcc1v8_pcie: supplied by vcca_1v8
[    1.137439] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.137474] LDO_REG4: supplied by vcc_sys
[    1.137481] vcc_sys: could not add device link regulator.22 err -2
[    1.137666] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
[    1.137789] vcc_sdio: ramp_delay not set
[    1.138322] vcc_sdio: 1800 <--> 3000 mV at 3000 mV 
[    1.138565] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.138601] LDO_REG5: supplied by vcc_sys
[    1.138608] vcc_sys: could not add device link regulator.23 err -2
[    1.139312] vcca3v0_codec: 3000 mV 
[    1.139561] rk808 0-001b: Looking up vcc10-supply from device tree
[    1.139596] LDO_REG6: supplied by vcc_sys
[    1.139604] vcc_sys: could not add device link regulator.24 err -2
[    1.140295] vcc_1v5: 1500 mV 
[    1.140553] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.140588] LDO_REG7: supplied by vcc_sys
[    1.140596] vcc_sys: could not add device link regulator.25 err -2
[    1.141289] vcca1v8_codec: 1800 mV 
[    1.141546] rk808 0-001b: Looking up vcc11-supply from device tree
[    1.141583] LDO_REG8: supplied by vcc_sys
[    1.141591] vcc_sys: could not add device link regulator.26 err -2
[    1.142285] vcc_3v0: 3000 mV 
[    1.142542] rk808 0-001b: Looking up vcc8-supply from device tree
[    1.142579] SWITCH_REG1: supplied by vcc3v3_sys
[    1.142587] vcc3v3_sys: could not add device link regulator.27 err -2
[    1.142618] vcc3v3_s3: at 3300 mV 
[    1.142845] rk808 0-001b: Looking up vcc12-supply from device tree
[    1.142881] SWITCH_REG2: supplied by vcc3v3_sys
[    1.142889] vcc3v3_sys: could not add device link regulator.28 err -2
[    1.143064] vcc3v3_s0: at 3300 mV 
[    1.146393] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.146827] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d0000
[    1.147506] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094d2000
[    1.148320] fusb302 4-0022: GPIO lookup for consumer int-n
[    1.148329] fusb302 4-0022: using device tree for GPIO lookup
[    1.148359] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[    1.148384] fusb302 4-0022: GPIO lookup for consumer vbus-5v
[    1.148391] fusb302 4-0022: using device tree for GPIO lookup
[    1.148415] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[    1.148437] fusb302 4-0022: GPIO lookup for consumer vbus-other
[    1.148444] fusb302 4-0022: using device tree for GPIO lookup
[    1.148453] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.148462] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.148469] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.148477] fusb302 4-0022: lookup for GPIO vbus-other failed
[    1.148485] fusb302 4-0022: GPIO lookup for consumer discharge
[    1.148491] fusb302 4-0022: using device tree for GPIO lookup
[    1.148499] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.148507] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.148514] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.148521] fusb302 4-0022: lookup for GPIO discharge failed
[    1.148685] fusb302 4-0022: Can't get property of role, set role to default DRP
[    1.156970] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[    1.157001] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d4000
[    1.158875] rockchip-rga ff680000.rga: HW Version: 0x03.02
[    1.159187] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[    1.159989] usbcore: registered new interface driver uvcvideo
[    1.159995] USB Video Class driver (1.1.1)
[    1.160574] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
[    1.160785] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
[    1.160840] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
[    1.160896] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
[    1.160950] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
[    1.163302] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.163472] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    1.164297] md: raid0 personality registered for level 0
[    1.164307] md: raid1 personality registered for level 1
[    1.164316] md: raid10 personality registered for level 10
[    1.164542] md: raid6 personality registered for level 6
[    1.164549] md: raid5 personality registered for level 5
[    1.164554] md: raid4 personality registered for level 4
[    1.164887] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.164899] device-mapper: raid: Loading target version 1.7.0
[    1.164910] Bluetooth: Virtual HCI driver ver 1.5
[    1.165030] Bluetooth: HCI UART driver ver 2.3
[    1.165038] Bluetooth: HCI UART protocol H4 registered
[    1.165044] Bluetooth: HCI UART protocol ATH3K registered
[    1.165129] usbcore: registered new interface driver bfusb
[    1.165184] usbcore: registered new interface driver btusb
[    1.165193] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
[    1.165198] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
[    1.165203] rtk_btusb: Register usb char device interface for BT driver
[    1.165372] usbcore: registered new interface driver rtk_btusb
[    1.165981] cpu cpu0: leakage=19
[    1.166011] cpu cpu0: Looking up cpu-supply from device tree
[    1.167189] cpu cpu4: leakage=33
[    1.167214] cpu cpu4: Looking up cpu-supply from device tree
[    1.168139] cpu cpu0: Looking up cpu-supply from device tree
[    1.168410] cpu cpu0: Looking up cpu-supply from device tree
[    1.169002] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    1.170839] cpu cpu4: Looking up cpu-supply from device tree
[    1.171558] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    1.174649] sdhci: Secure Digital Host Controller Interface driver
[    1.174652] sdhci: Copyright(c) Pierre Ossman
[    1.174656] Synopsys Designware Multimedia Card Interface Driver
[    1.174980] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500ms while pcie port initializes. Waited 0ms so far.
[    1.175340] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.175358] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.175369] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.175396] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.175414] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
[    1.175418] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
[    1.175442] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
[    1.175484] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.175496] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
[    1.175500] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.175505] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
[    1.175509] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
[    1.175512] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.175516] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
[    1.175520] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
[    1.175523] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.175526] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
[    1.175529] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
[    1.175532] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.175535] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
[    1.175607] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
[    1.175617] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[    1.175622] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[    1.186091] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.197082] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.197286] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.197537] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
[    1.197540] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
[    1.197545] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
[    1.197548] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
[    1.197552] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
[    1.197555] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
[    1.198602] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
[    1.198606] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
[    1.198622] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
[    1.198626] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
[    1.198635] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.198638] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.224087] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.224946] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
[    1.225127] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
[    1.225385] ledtrig-cpu: registered to indicate activity on CPUs
[    1.225450] hidraw: raw HID events driver (C) Jiri Kosina
[    1.227509] usbcore: registered new interface driver usbhid
[    1.227513] usbhid: USB HID core driver
[    1.228426] usbcore: registered new interface driver snd-usb-audio
[    1.228885] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]'
[    1.228890] es8316 1-0011: Can not read property spk_ctl_gpio
[    1.228903] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
[    1.232076] u32 classifier
[    1.232086] Netfilter messages via NETLINK v0.30.
[    1.232128] ip_set: protocol 6
[    1.232228] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.232258] Initializing XFRM netlink socket
[    1.232505] NET: Registered protocol family 10
[    1.233024] NET: Registered protocol family 17
[    1.233036] NET: Registered protocol family 15
[    1.233067] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.233084] Bridge firewalling registered
[    1.233256] Bluetooth: RFCOMM socket layer initialized
[    1.233270] Bluetooth: RFCOMM ver 1.11
[    1.233278] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.233283] Bluetooth: HIDP socket layer initialized
[    1.233310] 8021q: 802.1Q VLAN Support v1.8
[    1.233328] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.233547] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.233576] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6359sa
[    1.233579] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.233582] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.233586] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
[    1.233590] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
[    1.233593] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
[    1.233612] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
[    1.233615] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.233620] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    1.233623] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.233628] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.233655] [BT_RFKILL]: Enter rfkill_rk_init
[    1.233846] [BT_RFKILL]: Enter rfkill_rk_probe
[    1.233860] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
[    1.233863] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.233867] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
[    1.233876] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    1.233879] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.233888] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    1.233891] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
[    1.233899] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
[    1.233902] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.233913] [RK808]: clkout2_prepare
[    1.236092] [BT_RFKILL]: init gpio
[    1.236113] [BT_RFKILL]: Request irq for bt wakeup host
[    1.236142] [BT_RFKILL]: ** disable irq
[    1.236147] [BT_RFKILL]: setup rfkill
[    1.236216] [BT_RFKILL]: bt_default device registered.
[    1.236255] Key type dns_resolver registered
[    1.236881] Registered cp15_barrier emulation handler
[    1.237063] Registered setend emulation handler
[    1.237481] Loading compiled-in X.509 certificates
[    1.237931] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
[    1.237937] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[    1.238326] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree
[    1.238331] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[    1.238342] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
[    1.238698] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
[    1.238757] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
[    1.239374] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
[    1.239380] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
[    1.239441] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
[    1.239444] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
[    1.240017] rockchip-drm display-subsystem: dmc is disabled
[    1.240350] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008cc5088)
[    1.240452] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008cc5088)
[    1.240724] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.240781] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.241977] Registered IR keymap rc-cec
[    1.242135] input: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input0
[    1.242232] rc0: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
[    1.242435] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cbaf90)
[    1.242854] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    1.242872] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008cbbf98)
[    1.242877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.242879] [drm] No driver support for vblank timestamp query.
[    1.242941] rockchip-drm display-subsystem: failed to parse loader memory
[    1.249095] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[    1.249303] vcc_sdio: ramp_delay not set
[    1.249309] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[    1.273075] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    1.576200] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
[    1.598948] dwhdmi-rockchip ff940000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
[    1.598952] dwhdmi-rockchip ff940000.hdmi:     colorspace: RGB
[    1.598956] dwhdmi-rockchip ff940000.hdmi:     scan mode: Underscan
[    1.598959] dwhdmi-rockchip ff940000.hdmi:     colorimetry: No Data
[    1.598963] dwhdmi-rockchip ff940000.hdmi:     picture aspect: 16:9
[    1.598966] dwhdmi-rockchip ff940000.hdmi:     active aspect: Same as Picture
[    1.598970] dwhdmi-rockchip ff940000.hdmi:     itc: IT Content
[    1.598973] dwhdmi-rockchip ff940000.hdmi:     extended colorimetry: xvYCC 601
[    1.598977] dwhdmi-rockchip ff940000.hdmi:     quantization range: Full
[    1.598980] dwhdmi-rockchip ff940000.hdmi:     nups: Unknown Non-uniform Scaling
[    1.598983] dwhdmi-rockchip ff940000.hdmi:     video code: 16
[    1.598986] dwhdmi-rockchip ff940000.hdmi:     ycc quantization range: Full
[    1.598990] dwhdmi-rockchip ff940000.hdmi:     hdmi content type: Graphics
[    1.598993] dwhdmi-rockchip ff940000.hdmi:     pixel repeat: 0
[    1.598997] dwhdmi-rockchip ff940000.hdmi:     bar top 0, bottom 0, left 0, right 0
[    1.681836] Console: switching to colour frame buffer device 240x67
[    1.743869] rockchip-drm display-subsystem: fb0:  frame buffer device
[    1.754035] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.754258] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
[    1.754400] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[    1.754455] xhci-hcd xhci-hcd.7.auto: irq 229, io mem 0xfe800000
[    1.754593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.754600] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754607] usb usb3: Product: xHCI Host Controller
[    1.754612] usb usb3: Manufacturer: Linux 4.4.171-gd6d71979 xhci-hcd
[    1.754618] usb usb3: SerialNumber: xhci-hcd.7.auto
[    1.755011] hub 3-0:1.0: USB hub found
[    1.755038] hub 3-0:1.0: 1 port detected
[    1.755300] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.755447] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
[    1.755498] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.755574] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.755581] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755587] usb usb4: Product: xHCI Host Controller
[    1.755593] usb usb4: Manufacturer: Linux 4.4.171-gd6d71979 xhci-hcd
[    1.755599] usb usb4: SerialNumber: xhci-hcd.7.auto
[    1.755957] hub 4-0:1.0: USB hub found
[    1.755979] hub 4-0:1.0: 1 port detected
[    1.757283] xhci-hcd xhci-hcd.7.auto: remove, state 1
[    1.757306] usb usb4: USB disconnect, device number 1
[    1.757817] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
[    1.757976] xhci-hcd xhci-hcd.7.auto: remove, state 1
[    1.757991] usb usb3: USB disconnect, device number 1
[    1.763268] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    1.763409] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[    1.763524] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[    1.763552] xhci-hcd xhci-hcd.8.auto: irq 230, io mem 0xfe900000
[    1.763623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.763628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.763631] usb usb4: Product: xHCI Host Controller
[    1.763634] usb usb4: Manufacturer: Linux 4.4.171-gd6d71979 xhci-hcd
[    1.763637] usb usb4: SerialNumber: xhci-hcd.8.auto
[    1.763849] hub 4-0:1.0: USB hub found
[    1.763863] hub 4-0:1.0: 1 port detected
[    1.764001] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    1.764076] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[    1.764105] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.764142] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[    1.764146] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.764149] usb usb5: Product: xHCI Host Controller
[    1.764152] usb usb5: Manufacturer: Linux 4.4.171-gd6d71979 xhci-hcd
[    1.764155] usb usb5: SerialNumber: xhci-hcd.8.auto
[    1.764350] hub 5-0:1.0: USB hub found
[    1.764363] hub 5-0:1.0: 1 port detected
[    1.766851] ehci-platform fe380000.usb: EHCI Host Controller
[    1.766936] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 6
[    1.767008] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.772054] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.772131] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    1.772135] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.772138] usb usb6: Product: EHCI Host Controller
[    1.772141] usb usb6: Manufacturer: Linux 4.4.171-gd6d71979 ehci_hcd
[    1.772143] usb usb6: SerialNumber: fe380000.usb
[    1.772348] hub 6-0:1.0: USB hub found
[    1.772359] hub 6-0:1.0: 1 port detected
[    1.772698] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.772786] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 7
[    1.772839] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.777044] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
[    1.777052] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
[    1.777191] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
[    1.827456] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.827470] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.827477] usb usb7: Product: Generic Platform OHCI controller
[    1.827482] usb usb7: Manufacturer: Linux 4.4.171-gd6d71979 ohci_hcd
[    1.827488] usb usb7: SerialNumber: fe3a0000.usb
[    1.828135] hub 7-0:1.0: USB hub found
[    1.828161] hub 7-0:1.0: 1 port detected
[    1.829074] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
[    1.829081] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
[    1.829103] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
[    1.829845] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500ms while pcie port initializes. Waited 655ms so far.
[    1.830579] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
[    1.830586] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
[    1.950209] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
[    1.950372] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
[    1.950382] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
[    1.950419] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
[    1.950426] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
[    1.950441] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
[    1.950449] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
[    1.952595] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[    1.952604] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[    1.952814] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
[    1.952821] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
[    1.952828] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
[    1.952834] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
[    1.952992] asoc-simple-card: probe of spdif-sound failed with error -22
[    1.954425] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500ms while pcie port initializes. Waited 780ms so far.
[    1.956160] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:52:06 UTC (1358499126)
[    1.956174] of_cfs_init
[    1.956189] of_cfs_init: OK
[    1.965298] vcc1v8_wifi: disabling
[    1.965306] vcc3v3_pcie: disabling
[    1.965310] vcc1v8_pcie: disabling
[    1.965314] vcc0v9_pcie: disabling
[    1.965727] rk-keypad rockchip-key: no io-channels defined
[    1.965774] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[    1.965784] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[    1.965878] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
[    1.966451] ALSA device list:
[    1.966455]   #0: ES8316
[    1.966987] Freeing unused kernel memory: 1088K
[    1.967405] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500ms while pcie port initializes. Waited 793ms so far.
[    2.134300] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 89
[    2.134317] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[    2.134759] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    2.135531]  mmcblk0: p1
[    2.136641] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500ms while pcie port initializes. Waited 962ms so far.
[    2.187292] phy phy-pcie-phy.9: Looking up phy-supply from device tree
[    2.187300] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
[    2.188295] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
[    2.188309] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
[    2.188358] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
[    2.188612] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply from device tree
[    2.188786] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
[    2.188854] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
[    2.188913] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
[    2.188974] rockchip-pcie f8000000.pcie: missing optional "memory-region" property
[    2.188982] rockchip-pcie f8000000.pcie: missing optional "rockchip,dma_trx_enabled" property
[    2.188989] rockchip-pcie f8000000.pcie: missing optional "rockchip,deferred" property
[    2.189003] rockchip-pcie f8000000.pcie: enabled vpcie12v regulator
[    2.189010] rockchip-pcie f8000000.pcie: enabled vpcie3v3 regulator
[    2.189016] rockchip-pcie f8000000.pcie: enabled vpcie1v8 regulator
[    2.189022] rockchip-pcie f8000000.pcie: enabled vpcie0v9 regulator
[    2.189028] rockchip-pcie f8000000.pcie: calling really probe
[    2.189034] rockchip-pcie f8000000.pcie: PCIe asserting reset
[    2.189076] rockchip-pcie f8000000.pcie: advertising gen2/1 training
[    2.210147] rockchip-pcie f8000000.pcie: PCIe reset released
[    2.235269] rockchip-pcie f8000000.pcie: PCIe Gen1 link training completed
[    2.361663] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    2.662363] systemd[1]: System time before build time, advancing clock.
[    2.664938] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[    2.666402] cgroup: cgroup2: unknown option "nsdelegate"
[    2.679148] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.679666] systemd[1]: Detected architecture arm64.
[    2.686567] systemd[1]: Set hostname to <rockpro64>.
[    2.735293] rockchip-pcie f8000000.pcie: PCIe link training gen2 timeout, fall back to gen1!
[    2.735349] PCI host bridge /pcie@f8000000 ranges:
[    2.735365]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    2.735371]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.735589] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    2.735595] pci_bus 0000:00: root bus resource [bus 00-1f]
[    2.735599] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    2.735604] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    2.735608] pci_bus 0000:00: scanning bus
[    2.735628] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[    2.735702] pci 0000:00:00.0: supports D1
[    2.735706] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.735712] pci 0000:00:00.0: PME# disabled
[    2.735894] pci_bus 0000:00: fixups for bus
[    2.735899] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    2.735903] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.735912] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    2.735970] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-1f] (conflicts with (null) [bus 00-1f])
[    2.735974] pci_bus 0000:01: scanning bus
[    2.735981] pci_bus 0000:01: fixups for bus
[    2.735984] pci_bus 0000:01: bus scan returning with max=01
[    2.735987] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.735994] pci_bus 0000:00: bus scan returning with max=01
[    2.736008] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.736113] pcieport 0000:00:00.0: enabling bus mastering
[    2.736256] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    2.736262] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[    2.736334] aer 0000:00:00.0:pcie02: service driver aer loaded
[    2.736369] rockchip-pcie f8000000.pcie: PCIe probe completed successfully
[    2.736876] dwmmc_rockchip fe310000.dwmmc: detected pcie initialized, continuing...
[    2.737038] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.737095] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.737107] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.737158] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.737188] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
[    2.737336] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
[    2.737532] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
[    2.737539] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
[    2.737547] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
[    2.737554] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
[    2.737560] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
[    2.737567] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
[    2.737636] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    2.737763] vcc_sdio: Restricting voltage, 3000000-1950000uV
[    2.737770] dwmmc_rockchip fe310000.dwmmc: could not set regulator OCR (-22)
[    2.737776] dwmmc_rockchip fe310000.dwmmc: failed to enable vmmc regulator
[    2.748138] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.759205] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    2.759346] Bad mode in Error handler detected, code 0xbf000002 -- SError
[    2.759992] Internal error: Oops - bad mode: 0 [#1] SMP
[    2.760478] Modules linked in: phy_rockchip_pcie
[    2.760921] CPU: 4 PID: 248 Comm: systemd-gpt-aut Not tainted 4.4.171-gd6d71979 #1
[    2.761617] Hardware name: Pine64 RockPro64 (DT)
[    2.762046] task: ffffffc0f0bf8000 task.stack: ffffffc0ef834000
[    2.762593] PC is at 0x7f9ca06aa4
[    2.762902] LR is at 0x7f9c44d990
[    2.763210] pc : [<0000007f9ca06aa4>] lr : [<0000007f9c44d990>] pstate: 60000000
[    2.763891] sp : 0000007fcf3f63b0
[    2.764210] x29: 0000007fcf3f63b0 x28: 0000000000000001 
[    2.764719] x27: 0000007fcf3f64f8 x26: 0000000001dacc00 
[    2.765226] x25: 0000007f9c490000 x24: 0000000000000018 
[    2.765734] x23: 000000558ca14a00 x22: 000000558ca14a18 
[    2.766239] x21: 00000003b590e200 x20: 000000558ca13b60 
[    2.766747] x19: 0000000000000004 x18: 0000007f9ca97a70 
[    2.767249] x17: 0000007f9ca06a78 x16: 0000007f9c491460 
[    2.767752] x15: 0000000000000000 x14: 0000000000000002 
[    2.768271] x13: 000000000000270f x12: 0000000000000001 
[    2.768778] x11: 0000000000000000 x10: 0000000000000001 
[    2.769288] x9 : 0000007f9c1a6fa0 x8 : 000000000000003f 
[    2.769796] x7 : 0000000000000000 x6 : 0000000000000000 
[    2.770297] x5 : 00000003b590e218 x4 : 000000558ca14a00 
[    2.770802] x3 : 0000007f9ca9c1a8 x2 : 0000000000000018 
[    2.771317] x1 : 000000558ca14a28 x0 : 0000000000000018 

[    2.771978] Process systemd-gpt-aut (pid: 248, stack limit = 0xffffffc0ef834000)
[    2.772695] ---[ end trace c8dc86f9ff1c8d72 ]---
[    2.783083] vcc_sdio: Restricting voltage, 3000000-1950000uV
[    2.783717] dwmmc_rockchip fe310000.dwmmc: could not set regulator OCR (-22)
[    2.784465] dwmmc_rockchip fe310000.dwmmc: failed to enable vmmc regulator
[    2.796189] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    2.825346] systemd[242]: /lib/systemd/system-generators/systemd-gpt-auto-generator terminated by signal SEGV.
[    2.834106] vcc_sdio: Restricting voltage, 3000000-1950000uV
[    2.834757] dwmmc_rockchip fe310000.dwmmc: could not set regulator OCR (-22)
[    2.835513] dwmmc_rockchip fe310000.dwmmc: failed to enable vmmc regulator
[    2.836513] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    2.838281] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    2.847160] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    2.877331] systemd[1]: Configuration file /usr/local/lib/luarocks/rocks/ats/master-0/ats.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    2.889086] vcc_sdio: Restricting voltage, 3000000-1950000uV
[    2.889739] dwmmc_rockchip fe310000.dwmmc: could not set regulator OCR (-22)
[    2.890497] dwmmc_rockchip fe310000.dwmmc: failed to enable vmmc regulator
[    2.902176] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    2.990722] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
[    2.992391] systemd[1]: Created slice System Slice.
[    2.993466] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
[    2.994911] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    2.995966] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
[    3.002748] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.015540] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
[    3.022724] systemd[1]: Created slice User and Session Slice.
[    3.035509] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.042494] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.047400] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.050403] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.055301] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.058298] systemd[1]: Reached target Remote File Systems.
[    3.063194] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.066245] systemd[1]: Reached target Local Encrypted Volumes.
[    3.071245] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.074308] systemd[1]: Reached target System Time Synchronized.
[    3.079413] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
[    3.084995] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
[    3.088249] systemd[1]: Listening on udev Kernel Socket.
[    3.093536] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.099060] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.104587] systemd[1]: Listening on udev Control Socket.
[    3.109999] systemd[1]: Reached target Swap.
[    3.115482] systemd[1]: Listening on Journal Socket.
[    3.122817] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.130852] systemd[1]: Mounting POSIX Message Queue File System...
[    3.138883] systemd[1]: Starting Nameserver information manager...
[    3.147172] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.159151] systemd[1]: Starting Load Kernel Modules...
[    3.164387] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    3.172364] systemd[1]: Starting Restore / save the current clock...
[    3.181548] systemd[1]: Starting Set the console keyboard layout...
[    3.189860] systemd[1]: Starting udev Coldplug all Devices...
[    3.198657] systemd[1]: Mounting Kernel Debug File System...
[    3.207200] systemd[1]: Reached target Slices.
[    3.216231] systemd[1]: Started ntp-systemd-netif.path.
[    3.222698] systemd[1]: Listening on Syslog Socket.
[    3.230634] systemd[1]: Starting Journal Service...
[    3.238104] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.247526] systemd[1]: Mounted POSIX Message Queue File System.
[    3.255209] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.261649] systemd[1]: Started Load Kernel Modules.
[    3.267560] systemd[1]: Started Restore / save the current clock.
[    3.275453] systemd[1]: Mounted Kernel Debug File System.
[    3.282878] systemd[1]: Started Nameserver information manager.
[    3.289584] systemd[1]: Reached target Network (Pre).
[    3.296663] systemd[1]: Mounting FUSE Control File System...
[    3.304347] systemd[1]: Mounting Kernel Configuration File System...
[    3.313383] systemd[1]: Starting Apply Kernel Variables...
[    3.321250] systemd[1]: Starting Load/Save Random Seed...
[    3.333363] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.340320] systemd[1]: Mounted FUSE Control File System.
[    3.346030] systemd[1]: Mounted Kernel Configuration File System.
[    3.366974] systemd[1]: Started Load/Save Random Seed.
[    3.372478] systemd[1]: Started Apply Kernel Variables.
[    3.385999] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.390877] systemd[1]: Starting udev Kernel Device Manager...
[    3.416116] systemd[1]: Started udev Coldplug all Devices.
[    3.421598] systemd[1]: Started Set the console keyboard layout.
[    3.424985] systemd[1]: Reached target Local File Systems (Pre).
[    3.430980] systemd[1]: Mounting /tmp...
[    3.437820] systemd[1]: Mounted /tmp.
[    3.441018] systemd[1]: Reached target Local File Systems.
[    3.447031] systemd[1]: Starting Set console font and keymap...
[    3.452310] systemd[1]: Starting Armbian ZRAM config...
[    3.462483] systemd[1]: Starting Raise network interfaces...
[    3.465320] systemd[1]: Started Journal Service.
[    3.499832] systemd-journald[279]: Received request to flush runtime journal from PID 1
[    3.676949] zram0: detected capacity change from 0 to 52428800
[    3.727325] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
[    3.727329] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
[    3.727355] ff100000.saradc supply vref not found, using dummy regulator
[    3.748835] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[    3.748838] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[    3.749449] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    3.781728] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    3.786664] mali ff9a0000.gpu: leakage=25
[    3.786684] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    3.786708] vdd_gpu: could not add device link ff9a0000.gpu err -17
[    3.786714] vdd_gpu: Failed to create debugfs directory
[    3.793853] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.794133] mali ff9a0000.gpu: Protected mode not available
[    3.796138] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    3.796218] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.796429] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 413; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.797976] mali ff9a0000.gpu: Probed as mali0
[    3.838266] [BT_RFKILL]: Enter rfkill_rk_set_power
[    3.838275] [BT_RFKILL]: Set blocked:1
[    3.838278] [BT_RFKILL]: bt shut off power
[    4.242108] vendor storage:20160801 ret = -1
[    5.171224] cfg80211: World regulatory domain updated:
[    5.171232] cfg80211:  DFS Master region: unset
[    5.171235] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.171241] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.171245] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.171248] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.171252] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.171255] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.171259] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.171262] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.171265] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    5.846248] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[    6.004451] random: nonblocking pool is initialized
[    7.216025] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.361098] nr_pdflush_threads exported in /proc is scheduled for removal
[    9.221494] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx