DDR Version 1.13 20180801 In Channel 0: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB 256B stride channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 ch 0 ddrconfig = 0x101, ddrsize = 0x2020 ch 1 ddrconfig = 0x101, ddrsize = 0x2020 pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD OUT U-Boot SPL board init U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09) booted from SD Trying to boot from MMC2 NOTICE: BL31: v1.3(debug):65aa5ce NOTICE: BL31: Built : 10:47:37, Jun 19 2018 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1151): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000) Model: Pine64 RockPro64 DRAM: 3.9 GiB DCDC_REG1@vdd_center: ; enabling DCDC_REG2@vdd_cpu_l: ; enabling DCDC_REG3@vcc_ddr: ; enabling (ret: -38) DCDC_REG4@vcc_1v8: set 1800000 uV; enabling LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling LDO_REG4@vcc_sd: set 3300000 uV; enabling LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling LDO_REG6@vcc_1v5: set 1500000 uV; enabling LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling LDO_REG8@vcc_3v0: set 3000000 uV; enabling SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) vdd-log@vdd_log: ; enabling (ret: -38) MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Pine64 RockPro64 Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 20 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:7... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1113 bytes read in 19 ms (56.6 KiB/s) select kernel 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 2: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508-memtest Enter choice: 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 Retrieving file: /boot/initrd.img-4.4.154-1132-rockchip-ayufan-g8260cd865508 6525536 bytes read in 710 ms (8.8 MiB/s) Retrieving file: /boot/vmlinuz-4.4.154-1132-rockchip-ayufan-g8260cd865508 19986440 bytes read in 2130 ms (8.9 MiB/s) append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 Retrieving file: /boot/dtbs/4.4.154-1132-rockchip-ayufan-g8260cd865508/rockchip/rk3399-rockpro64.dtb 88026 bytes read in 110 ms (781.3 KiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f58c9000, end f5f02260 ... OK Loading Device Tree to 00000000f58b0000, end 00000000f58c87d9 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.154-1132-rockchip-ayufan-g8260cd865508 (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Sun Feb 24 12:07:56 UTC 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff] [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB) [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB) [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f2890000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002085] Console: colour dummy device 80x25 [ 0.002501] console [tty0] enabled [ 0.002827] bootconsole [uart0] disabled [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.154-1132-rockchip-ayufan-g8260cd865508 (root@run63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Sun Feb 24 12:07:56 UTC 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff] [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB) [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB) [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f2890000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002085] Console: colour dummy device 80x25 [ 0.002501] console [tty0] enabled [ 0.002827] bootconsole [uart0] disabled [ 0.003210] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003237] pid_max: default: 32768 minimum: 301 [ 0.003352] Security Framework initialized [ 0.003368] Yama: becoming mindful. [ 0.003397] AppArmor: AppArmor disabled by boot time parameter [ 0.003461] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003482] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004218] Initializing cgroup subsys io [ 0.004242] Initializing cgroup subsys memory [ 0.004279] Initializing cgroup subsys devices [ 0.004299] Initializing cgroup subsys freezer [ 0.004317] Initializing cgroup subsys net_cls [ 0.004335] Initializing cgroup subsys perf_event [ 0.004355] Initializing cgroup subsys net_prio [ 0.004377] Initializing cgroup subsys hugetlb [ 0.004393] Initializing cgroup subsys pids [ 0.004439] ftrace: allocating 45079 entries in 177 pages [ 0.110425] sched-energy: Sched-energy-costs installed from DT [ 0.110452] CPU0: update cpu_capacity 401 [ 0.110512] ASID allocator initialised with 32768 entries [ 0.113511] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.113972] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.115255] Detected VIPT I-cache on CPU1 [ 0.115284] CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.115310] CPU1: using LPI pending table @0x00000000f2b40000 [ 0.115353] CPU1: update cpu_capacity 401 [ 0.115357] CPU1: Booted secondary processor [410fd034] [ 0.115884] Detected VIPT I-cache on CPU2 [ 0.115905] CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.115928] CPU2: using LPI pending table @0x00000000f2b70000 [ 0.115955] CPU2: update cpu_capacity 401 [ 0.115958] CPU2: Booted secondary processor [410fd034] [ 0.116469] Detected VIPT I-cache on CPU3 [ 0.116489] CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.116512] CPU3: using LPI pending table @0x00000000f2bc0000 [ 0.116538] CPU3: update cpu_capacity 401 [ 0.116541] CPU3: Booted secondary processor [410fd034] [ 0.117053] Detected PIPT I-cache on CPU4 [ 0.117076] CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.117111] CPU4: using LPI pending table @0x00000000f2bf0000 [ 0.117146] CPU4: update cpu_capacity 1024 [ 0.117150] CPU4: Booted secondary processor [410fd082] [ 0.117720] Detected PIPT I-cache on CPU5 [ 0.117739] CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.117772] CPU5: using LPI pending table @0x00000000f2030000 [ 0.117799] CPU5: update cpu_capacity 1024 [ 0.117802] CPU5: Booted secondary processor [410fd082] [ 0.117884] Brought up 6 CPUs [ 0.118559] SMP: Total of 6 processors activated. [ 0.118591] CPU features: detected feature: GIC system register CPU interface [ 0.118628] CPU: All CPU(s) started at EL2 [ 0.118693] alternatives: patching kernel code [ 0.120072] devtmpfs: initialized [ 0.135601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.135655] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.136125] xor: measuring software checksum speed [ 0.173522] 8regs : 2874.000 MB/sec [ 0.213582] 8regs_prefetch: 2570.000 MB/sec [ 0.253643] 32regs : 3243.000 MB/sec [ 0.293703] 32regs_prefetch: 2864.000 MB/sec [ 0.293723] xor: using function: 32regs (3243.000 MB/sec) [ 0.293755] pinctrl core: initialized pinctrl subsystem [ 0.295357] Failed to find legacy iommu devices [ 0.295745] NET: Registered protocol family 16 [ 0.306040] cpuidle: using governor ladder [ 0.318064] cpuidle: using governor menu [ 0.318391] vdso: 2 pages (1 code @ ffffff8008c66000, 1 data @ ffffff80091e4000) [ 0.318446] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.318878] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.425925] raid6: int64x1 gen() 473 MB/s [ 0.494079] raid6: int64x1 xor() 404 MB/s [ 0.562129] raid6: int64x2 gen() 655 MB/s [ 0.630230] raid6: int64x2 xor() 593 MB/s [ 0.698357] raid6: int64x4 gen() 999 MB/s [ 0.766438] raid6: int64x4 xor() 666 MB/s [ 0.834583] raid6: int64x8 gen() 756 MB/s [ 0.902662] raid6: int64x8 xor() 630 MB/s [ 0.970781] raid6: neonx1 gen() 995 MB/s [ 1.038885] raid6: neonx1 xor() 670 MB/s [ 1.106986] raid6: neonx2 gen() 1330 MB/s [ 1.175059] raid6: neonx2 xor() 1006 MB/s [ 1.243154] raid6: neonx4 gen() 1800 MB/s [ 1.311271] raid6: neonx4 xor() 1224 MB/s [ 1.379374] raid6: neonx8 gen() 1695 MB/s [ 1.447482] raid6: neonx8 xor() 1267 MB/s [ 1.447501] raid6: using algorithm neonx4 gen() 1800 MB/s [ 1.447520] raid6: .... xor() 1224 MB/s, rmw enabled [ 1.447538] raid6: using intx1 recovery algorithm [ 1.449109] vcc3v3_pcie: supplied by dc_12v [ 1.449653] vcc_sys: supplied by dc_12v [ 1.450175] vcc3v3_sys: supplied by vcc_sys [ 1.451287] iommu: Adding device ff8f0000.vop to group 0 [ 1.451387] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found [ 1.451407] iommu: Removing device ff8f0000.vop from group 0 [ 1.451481] iommu: Adding device ff900000.vop to group 0 [ 1.452682] SCSI subsystem initialized [ 1.453028] usbcore: registered new interface driver usbfs [ 1.453089] usbcore: registered new interface driver hub [ 1.453182] usbcore: registered new device driver usb [ 1.453287] media: Linux media interface: v0.10 [ 1.453336] Linux video capture interface: v2.00 [ 1.453410] pps_core: LinuxPPS API ver. 1 registered [ 1.453430] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.453472] PTP clock support registered [ 1.454539] Advanced Linux Sound Architecture Driver Initialized. [ 1.455057] Bluetooth: Core ver 2.21 [ 1.455097] NET: Registered protocol family 31 [ 1.455116] Bluetooth: HCI device and connection manager initialized [ 1.455140] Bluetooth: HCI socket layer initialized [ 1.455163] Bluetooth: L2CAP socket layer initialized [ 1.455198] Bluetooth: SCO socket layer initialized [ 1.455603] NetLabel: Initializing [ 1.455623] NetLabel: domain hash size = 128 [ 1.455641] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.455693] NetLabel: unlabeled traffic allowed by default [ 1.456485] clocksource: Switched to clocksource arch_sys_counter [ 1.519745] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 1.519989] NET: Registered protocol family 2 [ 1.520435] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.520710] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.521480] TCP: Hash tables configured (established 32768 bind 32768) [ 1.521610] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 1.521823] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 1.522235] NET: Registered protocol family 1 [ 1.522551] RPC: Registered named UNIX socket transport module. [ 1.522573] RPC: Registered udp transport module. [ 1.522592] RPC: Registered tcp transport module. [ 1.522610] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.523299] Trying to unpack rootfs image as initramfs... [ 1.838209] Freeing initrd memory: 6372K [ 1.838766] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.838881] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.839996] kvm [1]: 8-bit VMID [ 1.840016] kvm [1]: Hyp mode initialized successfully [ 1.840154] kvm [1]: interrupt-controller@fff20000 IRQ10 [ 1.840371] kvm [1]: timer IRQ12 [ 1.843404] audit: initializing netlink subsys (disabled) [ 1.843453] audit: type=2000 audit(1.776:1): initialized [ 1.844189] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.851527] VFS: Disk quotas dquot_6.6.0 [ 1.851697] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.853134] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.854293] NFS: Registering the id_resolver key type [ 1.854331] Key type id_resolver registered [ 1.854350] Key type id_legacy registered [ 1.854381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.855048] fuse init (API version 7.23) [ 1.855766] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.860981] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.863106] Key type big_key registered [ 1.863179] [ 1.863179] TEE Core Framework initialization (ver 1:0.1) [ 1.863221] TEE armv7 Driver initialization [ 1.863621] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ 1.863646] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ 1.863848] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62) [ 1.867809] NET: Registered protocol family 38 [ 1.867855] Key type asymmetric registered [ 1.867879] Asymmetric key parser 'x509' registered [ 1.868071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.868242] io scheduler noop registered [ 1.868268] io scheduler deadline registered (default) [ 1.868318] io scheduler cfq registered [ 1.869842] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator [ 1.875391] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.875431] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 1.876959] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.876996] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.878187] pwm-regulator: supplied by vcc_sys [ 1.878875] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 1.880540] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A [ 1.996792] console [ttyS2] enabled [ 1.998217] [drm] Initialized drm 1.1.0 20060810 [ 2.002420] [drm] Rockchip DRM driver version: v1.0.1 [ 2.003369] usbcore: registered new interface driver udl [ 2.005204] Unable to detect cache hierarchy for CPU 0 [ 2.006424] brd: module loaded [ 2.012104] loop: module loaded [ 2.012433] lkdtm: No crash points registered, enable through debugfs [ 2.014442] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel [ 2.015047] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel [ 2.015646] rockchip-spi ff1d0000.spi: no high_speed pinctrl state [ 2.016787] m25p80 spi32766.0: gd25q128 (16384 Kbytes) [ 2.017278] 3 ofpart partitions found on MTD device spi32766.0 [ 2.017807] Creating 3 MTD partitions on "spi32766.0": [ 2.018278] 0x000000000000-0x0000003f8000 : "loader" [ 2.019675] 0x0000003f8000-0x000000400000 : "env" [ 2.020976] 0x0000007c0000-0x000000800000 : "vendor" [ 2.023690] force_sf_dma_mode is ignored if force_thresh_dma_mode is set. [ 2.024403] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 2.025063] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 2.025579] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). [ 2.026109] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 2.026842] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ 2.027470] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 2.033029] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 2.033662] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 2.034123] Ring mode enabled [ 2.034408] DMA HW capability register supported [ 2.034811] Normal descriptors [ 2.035131] RX Checksum Offload Engine supported (type 2) [ 2.035628] Wake-Up On Lan supported [ 2.035997] Enable RX Mitigation via HW Watchdog Timer [ 2.115301] libphy: stmmac: probed [ 2.115632] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 2.116215] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) [ 2.118126] Rockchip WiFi SYS interface (V1.00) ... [ 2.118731] usbcore: registered new interface driver cdc_ether [ 2.119320] usbcore: registered new interface driver rndis_host [ 2.121851] rockchip-dwc3 usb0: failed to get drvdata dwc3 [ 2.127191] rockchip-dwc3 usb1: fail to get drvdata hcd [ 2.128792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.129396] ehci-pci: EHCI PCI platform driver [ 2.129857] ehci-platform: EHCI generic platform driver [ 2.134179] ehci-platform fe3c0000.usb: EHCI Host Controller [ 2.134857] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 [ 2.135665] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000 [ 2.144526] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 2.145397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.146027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.146709] usb usb1: Product: EHCI Host Controller [ 2.147168] usb usb1: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 ehci_hcd [ 2.147965] usb usb1: SerialNumber: fe3c0000.usb [ 2.148959] hub 1-0:1.0: USB hub found [ 2.149332] hub 1-0:1.0: 1 port detected [ 2.150230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.150803] ohci-platform: OHCI generic platform driver [ 2.151751] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 2.152522] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 [ 2.153315] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000 [ 2.212701] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.213333] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.214015] usb usb2: Product: Generic Platform OHCI controller [ 2.214566] usb usb2: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 ohci_hcd [ 2.215363] usb usb2: SerialNumber: fe3e0000.usb [ 2.216341] hub 2-0:1.0: USB hub found [ 2.216744] hub 2-0:1.0: 1 port detected [ 2.218824] usbcore: registered new interface driver iforce [ 2.219385] usbcore: registered new interface driver xpad [ 2.220193] usbcore: registered new interface driver usbtouchscreen [ 2.221017] .. rk pwm remotectl v1.1 init [ 2.221618] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0 [ 2.223017] i2c /dev entries driver [ 2.224464] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 2.225198] fan53555-reg: supplied by vcc_sys [ 2.227879] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 2.228566] fan53555-reg: supplied by vcc_sys [ 2.231431] rk808 0-001b: Pmic Chip id: 0x0 [ 2.234869] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.235475] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.236114] DCDC_REG1: supplied by vcc_sys [ 2.237245] DCDC_REG2: supplied by vcc_sys [ 2.238185] DCDC_REG3: supplied by vcc_sys [ 2.238843] DCDC_REG4: supplied by vcc_sys [ 2.239677] LDO_REG1: supplied by vcc_sys [ 2.241160] LDO_REG2: supplied by vcc_sys [ 2.242488] LDO_REG3: supplied by vcc_sys [ 2.243833] LDO_REG4: supplied by vcc_sys [ 2.245185] LDO_REG5: supplied by vcc_sys [ 2.246531] LDO_REG6: supplied by vcc_sys [ 2.247872] LDO_REG7: supplied by vcc_sys [ 2.249534] LDO_REG8: supplied by vcc_sys [ 2.250890] SWITCH_REG1: supplied by vcc3v3_sys [ 2.251598] SWITCH_REG2: supplied by vcc3v3_sys [ 2.255457] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 [ 2.256470] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094da000 [ 2.257760] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094dc000 [ 2.259509] fusb302 4-0022: Can't get property of role, set role to default DRP [ 2.268413] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE [ 2.269258] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094de000 [ 2.271014] IR NEC protocol handler initialized [ 2.271436] IR RC5(x/sz) protocol handler initialized [ 2.271902] IR RC6 protocol handler initialized [ 2.272322] IR JVC protocol handler initialized [ 2.272755] IR Sony protocol handler initialized [ 2.273184] IR SANYO protocol handler initialized [ 2.273620] IR Sharp protocol handler initialized [ 2.274056] IR MCE Keyboard/mouse protocol handler initialized [ 2.274589] IR XMP protocol handler initialized [ 2.275623] usbcore: registered new interface driver uvcvideo [ 2.276144] USB Video Class driver (1.1.1) [ 2.279483] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 [ 2.280441] rockchip-thermal ff260000.tsadc: tsadc is probed successfully! [ 2.282091] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.282866] Bluetooth: Virtual HCI driver ver 1.5 [ 2.283392] Bluetooth: HCI UART driver ver 2.3 [ 2.283802] Bluetooth: HCI UART protocol H4 registered [ 2.284268] Bluetooth: HCI UART protocol LL registered [ 2.284781] Bluetooth: HCI UART protocol ATH3K registered [ 2.285331] usbcore: registered new interface driver bfusb [ 2.285879] usbcore: registered new interface driver btusb [ 2.286766] cpu cpu0: Failed to get leakage [ 2.287226] cpu cpu0: Failed to get pvtm [ 2.287834] cpu cpu4: Failed to get leakage [ 2.288286] cpu cpu4: Failed to get pvtm [ 2.292823] sdhci: Secure Digital Host Controller Interface driver [ 2.293387] sdhci: Copyright(c) Pierre Ossman [ 2.293788] Synopsys Designware Multimedia Card Interface Driver [ 2.295107] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 0ms so far. [ 2.296799] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. [ 2.297482] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. [ 2.298103] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a [ 2.298661] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 2.299565] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. [ 2.300407] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found [ 2.301270] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 2.301960] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 2.316653] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.333556] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized [ 2.336405] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.339623] sdhci-arasan fe330000.sdhci: No vmmc regulator found [ 2.340174] sdhci-arasan fe330000.sdhci: No vqmmc regulator found [ 2.363097] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done [ 2.364019] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done [ 2.376586] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ 2.378895] hidraw: raw HID events driver (C) Jiri Kosina [ 2.384122] usbcore: registered new interface driver usbhid [ 2.384670] usbhid: USB HID core driver [ 2.391703] usbcore: registered new interface driver snd-usb-audio [ 2.392863] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 2.393621] es8316 1-0010: Can not read property spk_ctl_gpio [ 2.404944] u32 classifier [ 2.405254] Netfilter messages via NETLINK v0.30. [ 2.405736] ip_set: protocol 6 [ 2.406233] Initializing XFRM netlink socket [ 2.407206] NET: Registered protocol family 10 [ 2.408740] NET: Registered protocol family 17 [ 2.409178] NET: Registered protocol family 15 [ 2.409617] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.410773] Bridge firewalling registered [ 2.411403] Bluetooth: RFCOMM socket layer initialized [ 2.411891] Bluetooth: RFCOMM ver 1.11 [ 2.412253] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.412815] Bluetooth: HIDP socket layer initialized [ 2.413322] 8021q: 802.1Q VLAN Support v1.8 [ 2.413729] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 2.414411] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 2.414890] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354 [ 2.415511] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 2.416154] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 2.416906] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0. [ 2.417729] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 2.418396] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 2.418871] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 2.419353] [BT_RFKILL]: Enter rfkill_rk_init [ 2.420090] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83. [ 2.420878] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9. [ 2.421622] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91. [ 2.422363] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4. [ 2.423563] [BT_RFKILL]: Request irq for bt wakeup host [ 2.424090] [BT_RFKILL]: ** disable irq [ 2.424612] [BT_RFKILL]: bt_default device registered. [ 2.425151] Key type dns_resolver registered [ 2.426052] Registered cp15_barrier emulation handler [ 2.426590] Registered setend emulation handler [ 2.427547] registered taskstats version 1 [ 2.430665] Btrfs loaded, integrity-checker=on [ 2.431140] BTRFS: selftest: Running btrfs free space cache tests [ 2.431712] BTRFS: selftest: Running extent only tests [ 2.432195] BTRFS: selftest: Running bitmap only tests [ 2.432702] BTRFS: selftest: Running bitmap and extent tests [ 2.433237] BTRFS: selftest: Running space stealing from bitmap to extent [ 2.434561] BTRFS: selftest: Free space cache tests finished [ 2.435074] BTRFS: selftest: Running extent buffer operation tests [ 2.435606] BTRFS: selftest: Running btrfs_split_item tests [ 2.436175] BTRFS: selftest: Running find delalloc tests [ 2.536807] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 172 [ 2.537441] mmc0: new ultra high speed SDR104 SDXC card at address 0001 [ 2.538776] mmcblk0: mmc0:0001 EC2QT 59.6 GiB [ 2.543571] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 2.594165] BTRFS: selftest: Running btrfs_get_extent tests [ 2.594771] BTRFS: selftest: Running hole first btrfs_get_extent test [ 2.595356] BTRFS: selftest: Running outstanding_extents tests [ 2.595912] BTRFS: selftest: Running qgroup tests [ 2.596331] BTRFS: selftest: Qgroup basic add [ 2.596765] BTRFS: selftest: Qgroup multiple refs test [ 2.633911] Key type encrypted registered [ 2.637302] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS supply regulator [ 2.642029] rockchip-drm display-subsystem: devfreq is not set [ 2.643130] rockchip-vop ff900000.vop: missing rockchip,grf property [ 2.644227] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008d31f38) [ 2.645132] rockchip-vop ff8f0000.vop: missing rockchip,grf property [ 2.646087] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008d31f38) [ 2.647903] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports [ 2.648688] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.649844] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.653260] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008d27f40) [ 2.655326] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports [ 2.656862] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008d28f18) [ 2.657849] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 2.658738] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.659381] [drm] No driver support for vblank timestamp query. [ 2.660384] rockchip-drm display-subsystem: failed to parse loader memory [ 2.661120] rockchip-drm display-subsystem: No connectors reported connected with modes [ 2.661932] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.690405] Console: switching to colour frame buffer device 128x48 [ 2.705725] rockchip-drm display-subsystem: fb0: frame buffer device [ 2.727277] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 2.728159] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 [ 2.729268] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 [ 2.730333] xhci-hcd xhci-hcd.5.auto: irq 224, io mem 0xfe800000 [ 2.731235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.732033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.732940] usb usb3: Product: xHCI Host Controller [ 2.733519] usb usb3: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 xhci-hcd [ 2.734511] usb usb3: SerialNumber: xhci-hcd.5.auto [ 2.735706] hub 3-0:1.0: USB hub found [ 2.736186] hub 3-0:1.0: 1 port detected [ 2.737077] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 2.737893] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 [ 2.738863] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.739935] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.740760] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.741605] usb usb4: Product: xHCI Host Controller [ 2.742181] usb usb4: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 xhci-hcd [ 2.743171] usb usb4: SerialNumber: xhci-hcd.5.auto [ 2.744338] hub 4-0:1.0: USB hub found [ 2.744856] hub 4-0:1.0: 1 port detected [ 2.747016] xhci-hcd xhci-hcd.5.auto: remove, state 1 [ 2.754731] usb usb4: USB disconnect, device number 1 [ 2.784940] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microseconds. [ 2.791364] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting reset. [ 2.797807] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered [ 2.803253] xhci-hcd xhci-hcd.5.auto: remove, state 1 [ 2.808405] usb usb3: USB disconnect, device number 1 [ 2.813927] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered [ 2.823842] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 2.828394] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3 [ 2.833067] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 [ 2.837747] xhci-hcd xhci-hcd.6.auto: irq 225, io mem 0xfe900000 [ 2.842161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.846530] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.850903] usb usb3: Product: xHCI Host Controller [ 2.855022] usb usb3: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 xhci-hcd [ 2.859524] usb usb3: SerialNumber: xhci-hcd.6.auto [ 2.865240] hub 3-0:1.0: USB hub found [ 2.871989] hub 3-0:1.0: 1 port detected [ 2.879163] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 2.886240] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4 [ 2.890686] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.894684] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.898444] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.902220] usb usb4: Product: xHCI Host Controller [ 2.905770] usb usb4: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 xhci-hcd [ 2.909695] usb usb4: SerialNumber: xhci-hcd.6.auto [ 2.913699] hub 4-0:1.0: USB hub found [ 2.917199] hub 4-0:1.0: 1 port detected [ 2.924708] ehci-platform fe380000.usb: EHCI Host Controller [ 2.928459] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 [ 2.932366] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000 [ 2.944676] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 2.948462] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.952107] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.955753] usb usb5: Product: EHCI Host Controller [ 2.959191] usb usb5: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 ehci_hcd [ 2.963057] usb usb5: SerialNumber: fe380000.usb [ 2.967107] hub 5-0:1.0: USB hub found [ 2.970387] hub 5-0:1.0: 1 port detected [ 2.973810] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 2.977045] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 [ 2.980277] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000 [ 3.041199] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.053880] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.066509] usb usb6: Product: Generic Platform OHCI controller [ 3.079016] usb usb6: Manufacturer: Linux 4.4.154-1132-rockchip-ayufan-g8260cd865508 ohci_hcd [ 3.092170] usb usb6: SerialNumber: fe3a0000.usb [ 3.107166] hub 6-0:1.0: USB hub found [ 3.112557] hub 6-0:1.0: 1 port detected [ 3.119207] dwmmc_rockchip fe3! .dgiLc8`DfD``@LFDN`@H@pND Hbf@@H@`B@@`N``@L@`@@H@p@b @@`@@0 HbbND@` [ 3.232223] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [ 3.245793] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1 [ 3.259392] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack [ 3.273199] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P [ 3.286885] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P [ 3.301570] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file [ 3.307543] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file [ 3.313487] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file [ 3.319331] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file [ 3.325094] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file [ 3.330816] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file [ 3.341030] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0 [ 3.345880] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22 [ 3.350612] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22 [ 3.355563] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22 [ 3.360591] asoc-simple-card: probe of spdif-sound failed with error -22 [ 3.367283] dwmmc_rockchip fe310000.dwmmc: deferring forAmApof2 msw`IhE`ChA`o`pInI`@AL@r@b @@`@@ & HbbND@` [ 3.374782] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:10 UTC (1358499010) [ 3.382113] of_cfs_init [ 3.388749] of_cfs_init: OK [ 3.417456] vcc3v3_pcie: disabling [ 3.421734] rk-keypad rockchip-key: no io-channels defined [ 3.425662] input: rk29-keypad as /devices/platform/rockchip-key/input/input1 [ 3.430721] ALSA device list: [ 3.432029] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 1137ms so far. [ 3.453714] #0: rockchip,es8316-codec [ 3.460214] ttyS2 - failed to request DMA, use interrupt mode [ 3.466575] Freeing unused kernel memory: 1216K Loading, please wait... starting version 237 [ 3.660594] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 3.781969] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present [ 3.787149] mali ff9a0000.gpu: Failed to get leakage [ 3.787176] mali ff9a0000.gpu: Failed to get pvtm [ 3.787772] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 [ 3.787970] mali ff9a0000.gpu: Protected mode not available [ 3.788399] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model [ 3.788525] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 414; [Func] : kbase_devfreq_init(); success initing power_model_simple. [ 3.811430] mali ff9a0000.gpu: Probed as mali0 [ 3.911370] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 3.927832] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok done. [ 3.934495] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to create Playback debugfs file [ 3.946040] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found [ 3.954370] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found [ 3.960922] rockchip-pcie f8000000.pcie: invalid power supply Warning: fsck not present, so skipping root file system [ 3.989283] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 4.317346] systemd[1]: System time before build time, advancing clock. [ 4.377169] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.387083] cgroup: cgroup2: unknown option "nsdelegate" [ 4.410371] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.424877] systemd[1]: Detected architecture arm64. Welcome to Ubuntu 18.04.2 LTS! [ 4.439160] systemd[1]: Set hostname to . [ 4.464312] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! [ 4.471193] rockchip-pcie: probe of f8000000.pcie failed with error -110 [ 4.479465] dwmmc_rockchip fe310000.dwmmc: depeCpe``CiaanipIAhire`(bOntHndHnF , 0$$ 0@fHHB`NHH@`@`@`` " @@`@Nb`@@`@f@@` $@@@`D@DB`NBBB@@`D@" @fHHB0@HHNB@`@@HH`f`b@ "$$ 0HHB@Nb`HHB 0`bb`@@@bHN 8 pbHN``@` @B``@H @@d8 & @fHHB`NBBB@@`D@" @fHHB0 bHN`@L@`@@H@p@L@DD@B`@@bf@`L@LF@bNLHpb@NfLDN``@@D@`b`HN@@@@`L@``b@LFD@`@f@HH@LF `bb`@@@bHN` 8 pbHN` &" bpb`@H@ 0@H@H@@bpb`@H@bpb`@Hbpb`@H@N``L@H@ b@`d@B@0"$BNLD@F``@b@LD@`@f@HH@@` & 0"$0bpL@DD@B`@@bf@`L@LF@bNLHpb@NfLDN``@@D@`b`HN@@@`L@``b@LFb`@H@H@pLB@`NL@p@@  2" H H`@L@NH0bpb`@H@0@`bND@L``Npq@d@@H@@H @p`@b`@@0$@@`bND@L``N`pd@@H@@`@L@NH0bpb`@H@0`L@L@`@@H@b`@H@0`L@L@`@@H@p@@``@LNH`@@@@ 0`@@`@@bH@B@pb`@H`@L@LFNL`@@dNL``NHNBB@`  " && H@b`@L@LFNLN``L@HNBB@`  " "$ 0bpb`@H@ `@``@LF@HN`L`NN`@L@@`L@H@H@pb`@Hb@H@pb`@H N`L`@LF@bb@F@`@`@@H@pb`@H pb`@H@ 0`@@`@@bH@B@bpb`@b@`@@Hp @F@`p bH@B@  2" H H@@`@@bH@B@bpb`@b@`@@Hp@F@``p bH@B  && " ```@L` Ba`L@H `@``@LF`@@`@H@b`ND`@``@`@@bb  $" & bpb`@H@ 0`@``@@@HN`L`NN`d@L`fN`B N`BNLL@B`@@ @b@@H@LFB@ $0 00 b`@H  2" H H`@``@@`@@`@H@b`ND`@``@`@b`@�d@BLN@@bDN``@@B``@L`B@`L@H 2" H H`@`@@ @H@b`d@`@LDN`@`@`@B@d@B@ N@@b@L@@d  2" H HF@`  2" H H`@``@@`@@dNH@`H`F@HH@d@B@b  2" H H`@``@@`@@d@`L@H@d@B@L@F@`  2" H H`@``@@H`b@N``L@H`N@`b@b`@L``N`@F@ `@``@LF @`fN`B@`d@B@  2" H H`@``@@ @`fN`B@`d@B@  2" H H@@B@@@`@`F@`N`L@@`@  2" H HN`L@@@d@B@@@d``p  2" H HN`L@@@d@B@@@d@@bB@H@@@@NN` N`@``@LF@`BNLbNH@DNL`@L@B@pH@`  2" H H`@NL `@``@LF`@@`@@N``pb`@HNN`@``@NfL  2" H H`@``@@`@@`@@N``pb`@HNN`@``@NfL  2" H H`@``@@@@b@L@`fN`B@L`@`D@B@b  2" H H`@``@@ @f`@@@p  2"`bpb`@@bb@F@`bNBB@`  2" H H@@B@@@`@`F@`NBB@`b  2" H H@@B@@@`@`F@`@LFL@`@@H@p@bp`@Hbf@`@LF `@``@LNF@L@`d@B@  2" H H`@``@`bpb`@@bb@F@`b ``@LF@b`@`B@@`@@@HNLDN`bpb`@HL`fN`B@ `@``@LF`@bHdBNL``H` d@@ b@d@B@ `@``@LFN`@@BBF`N`L@``NF`@H``NB@bb@LF@@@HNL  20 L H`@``@@@@Hp@````F`@@@@L@BH@@L@B`@d@`@@b  2" H 2" H H`@``@@@L@`@`@B@pb@DLN``@@`@  2" H H`@``@@@b@`bpb`@HB`@d@`p@`@NHH@B`N`  2" H H`@``@@@d@@b`N`@N`L@@`@`@`@  2" H H`@``@@b```H@B@L` `@``@LFNb`L@H@@`d@B@  2" H H`@``@@Nb`L@H@@`d@B@  2"  H`@``@@ @`N`@L@F@`  2" H H@@B@@@`@`F@` @`fN`B `@``@@`@`d@B@  2" H H`@``@@@b`@`B@@`@@@HNLDN`bpb`@HL@`fN`B@  2" @L@F@`  2" H H`@``@@`@@`@@N``pb`@H`LH@d@H@@LF@b  2" H H`@``@@``@N`@p@`@N@L@F@` @`L`` 0 `NBB``N$ ``p`NBB``N$ HNF@L0  2" H N``@@@b@`bpb`@HB`@d@`@`F@NF@L`NH``b `N``@LF@``pNL``p L``p N``@LF@`@@H@``pNL`p  " H H`N`@@b@B`@d@`@@bf@`@@dp`@H  2" H H@@B`@d@`@@bf@`@@dp`@b`N`@N`L@@`@`@`@  2" H H`N``@@@bb@NL ND`b@``NBB$  2" H H HNd@@bH@B@b@`HB@ND`NBB$ `N``@Lp@bp`@Hbf@`@LF  2" H H`N``@@`@`F@`@HN`@@H@pbH@B@L`  2" H H`N``@@ @`fNB @H@@bNH`@NL  H`N``@@`@`F@`@b@Bpb`@H  2" HH@B@b@`@L@@bb@NLH@B@  2" H HHNb@`bp`@@b@F@`H@@`@B`N`p@`B`N``@@ @`fN`B@H@pLB@`NL@p@`@NL  2" H H`N``@@`N`@b@d`@@B```@L`BHNBB 2" H H H`N``@@`@`F@`f@`  2" H H@@B@@@`@`F@`@``@NfL  2" H H@@B@@@`@`F@`@L@H`@` `@``@LF@@NN`  & 0 @ff@`0`L@p`@B`@@BHNbbpb`@Hf@HH`@@NN`bNN 0 " 0 `@@NN`0@b`@``@LFbpb`@DDR Version 1.13 20180801 In soft reset SRX Channel 0: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB 256B stride channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 ch 0 ddrconfig = 0x101, ddrsize = 0x2020 ch 1 ddrconfig = 0x101, ddrsize = 0x2020 pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD OUT U-Boot SPL board init U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09) booted from SD Trying to boot from MMC2 NOTICE: BL31: v1.3(debug):65aa5ce NOTICE: BL31: Built : 10:47:37, Jun 19 2018 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1151): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000) Model: Pine64 RockPro64 DRAM: 3.9 GiB DCDC_REG1@vdd_center: ; enabling DCDC_REG2@vdd_cpu_l: ; enabling DCDC_REG3@vcc_ddr: ; enabling (ret: -38) DCDC_REG4@vcc_1v8: set 1800000 uV; enabling LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling LDO_REG4@vcc_sd: set 3300000 uV; enabling LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling LDO_REG6@vcc_1v5: set 1500000 uV; enabling LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling LDO_REG8@vcc_3v0: set 3000000 uV; enabling SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) vdd-log@vdd_log: ; enabling (ret: -38) MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Pine64 RockPro64 normal boot Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 20 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:7... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1113 bytes read in 20 ms (53.7 KiB/s) select kernel 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 2: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508-memtest Enter choice: 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 Retrieving file: /boot/initrd.img-4.4.154-1132-rockchip-ayufan-g8260cd865508 6525536 bytes read in 711 ms (8.8 MiB/s) Retrieving file: /boot/vmlinuz-4.4.154-1132-rockchip-ayufan-g8260cd865508 19986440 bytes read in 2131 ms (8.9 MiB/s) append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 Retrieving file: /boot/dtbs/4.4.154-1132-rockchip-ayufan-g8260cd865508/rockchip/rk3399-rockpro64.dtb 88026 bytes read in 113 ms (759.8 KiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f58c9000, end f5f02260 ... OK Loading Device Tree to 00000000f58b0000, end 00000000f58c87d9 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.154-1132-rockchip-ayufan-g8260cd865508 (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Sun Feb 24 12:07:56 UTC 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff] [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB) [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB) [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f2890000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002071] Console: colour dummy device 80x25 [ 0.002491] console [tty0] enabled [ 0.002821] bootconsole [uart0] disabled DDR Version 1.13 20180801 In soft reset SRX Channel 0: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB 256B stride channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x2 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 ch 0 ddrconfig = 0x101, ddrsize = 0x2020 ch 1 ddrconfig = 0x101, ddrsize = 0x2020 pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD OUT U-Boot SPL board init U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09) booted from SD Trying to boot from MMC2 NOTICE: BL31: v1.3(debug):65aa5ce NOTICE: BL31: Built : 10:47:37, Jun 19 2018 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1151): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000) Model: Pine64 RockPro64 DRAM: 3.9 GiB DCDC_REG1@vdd_center: ; enabling DCDC_REG2@vdd_cpu_l: ; enabling DCDC_REG3@vcc_ddr: ; enabling (ret: -38) DCDC_REG4@vcc_1v8: set 1800000 uV; enabling LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling LDO_REG4@vcc_sd: set 3300000 uV; enabling LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling LDO_REG6@vcc_1v5: set 1500000 uV; enabling LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling LDO_REG8@vcc_3v0: set 3000000 uV; enabling SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) vdd-log@vdd_log: ; enabling (ret: -38) MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Pine64 RockPro64 normal boot Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 19 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:7... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1113 bytes read in 20 ms (53.7 KiB/s) select kernel 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 2: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508-memtest Enter choice: 1: kernel-4.4.154-1132-rockchip-ayufan-g8260cd865508 Retrieving file: /boot/initrd.img-4.4.154-1132-rockchip-ayufan-g8260cd865508 6525536 bytes read in 711 ms (8.8 MiB/s) Retrieving file: /boot/vmlinuz-4.4.154-1132-rockchip-ayufan-g8260cd865508 19986440 bytes read in 2131 ms (8.9 MiB/s) append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 Retrieving file: /boot/dtbs/4.4.154-1132-rockchip-ayufan-g8260cd865508/rockchip/rk3399-rockpro64.dtb 88026 bytes read in 114 ms (753.9 KiB/s) ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f58c9000, end f5f02260 ... OK Loading Device Tree to 00000000f58b0000, end 00000000f58c87d9 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.154-1132-rockchip-ayufan-g8260cd865508 (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Sun Feb 24 12:07:56 UTC 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:93:33:e5:cd:00 eth1addr= serial=10f68641fd3a72d cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff] [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB) [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB) [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual) [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000000f2890000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002073] Console: colour dummy device 80x25 [ 0.002492] console [tty0] enabled [ 0.002818] bootconsole [uart0] disabled