[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Sat Jul 21 20:18:03 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 15864 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 1015296 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7eec000 s46248 r8192 d31576 u86016
[    0.000000] pcpu-alloc: s46248 r8192 d31576 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=be:6e:e7:8d:09:85 eth1addr= serial=a71fb89e4c54064 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf7ea3000-0xf7ee3000] (0MB) mapped at [ffffffc0f7ea3000-ffffffc0f7ee2fff]
[    0.000000] Memory: 3961748K/4061184K available (11966K kernel code, 1706K rwdata, 4340K rodata, 1152K init, 770K bss, 99436K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
                   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
                     .init : 0xffffff8009080000 - 0xffffff80091a0000   (  1152 KB)
                     .text : 0xffffff8008080000 - 0xffffff8008c30000   ( 11968 KB)
                   .rodata : 0xffffff8008c30000 - 0xffffff8009080000   (  4416 KB)
                     .data : 0xffffff80091a0000 - 0xffffff800934a808   (  1707 KB)
                   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
                             0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
                   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
                   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
                   memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2890000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f28a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001952] Console: colour dummy device 80x25
[    0.002377] console [tty0] enabled
[    0.002707] bootconsole [uart0] disabled
[    0.003110] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003138] pid_max: default: 32768 minimum: 301
[    0.003260] Security Framework initialized
[    0.003277] Yama: becoming mindful.
[    0.003308] AppArmor: AppArmor disabled by boot time parameter
[    0.003368] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003389] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004185] Initializing cgroup subsys io
[    0.004212] Initializing cgroup subsys memory
[    0.004253] Initializing cgroup subsys devices
[    0.004273] Initializing cgroup subsys freezer
[    0.004292] Initializing cgroup subsys net_cls
[    0.004310] Initializing cgroup subsys perf_event
[    0.004330] Initializing cgroup subsys net_prio
[    0.004353] Initializing cgroup subsys hugetlb
[    0.004370] Initializing cgroup subsys pids
[    0.004417] ftrace: allocating 44383 entries in 174 pages
[    0.118697] sched-energy: Sched-energy-costs installed from DT
[    0.118728] CPU0: update cpu_capacity 401
[    0.118792] ASID allocator initialised with 32768 entries
[    0.122027] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.122479] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.123785] Detected VIPT I-cache on CPU1
[    0.123817] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.123848] CPU1: using LPI pending table @0x00000000f2b40000
[    0.123890] CPU1: update cpu_capacity 401
[    0.123894] CPU1: Booted secondary processor [410fd034]
[    0.124425] Detected VIPT I-cache on CPU2
[    0.124445] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.124474] CPU2: using LPI pending table @0x00000000f2b60000
[    0.124503] CPU2: update cpu_capacity 401
[    0.124506] CPU2: Booted secondary processor [410fd034]
[    0.125042] Detected VIPT I-cache on CPU3
[    0.125062] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.125090] CPU3: using LPI pending table @0x00000000f2bc0000
[    0.125117] CPU3: update cpu_capacity 401
[    0.125121] CPU3: Booted secondary processor [410fd034]
[    0.125635] Detected PIPT I-cache on CPU4
[    0.125661] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.125699] CPU4: using LPI pending table @0x00000000f2bf0000
[    0.125738] CPU4: update cpu_capacity 1024
[    0.125742] CPU4: Booted secondary processor [410fd082]
[    0.126294] Detected PIPT I-cache on CPU5
[    0.126313] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.126349] CPU5: using LPI pending table @0x00000000f2030000
[    0.126378] CPU5: update cpu_capacity 1024
[    0.126381] CPU5: Booted secondary processor [410fd082]
[    0.126469] Brought up 6 CPUs
[    0.127163] SMP: Total of 6 processors activated.
[    0.127195] CPU features: detected feature: GIC system register CPU interface
[    0.127233] CPU: All CPU(s) started at EL2
[    0.127302] alternatives: patching kernel code
[    0.128787] devtmpfs: initialized
[    0.142751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.142807] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.143353] xor: measuring software checksum speed
[    0.152971]    8regs     :  2876.000 MB/sec
[    0.163028]    8regs_prefetch:  2572.000 MB/sec
[    0.173085]    32regs    :  3244.000 MB/sec
[    0.183142]    32regs_prefetch:  2864.000 MB/sec
[    0.183162] xor: using function: 32regs (3244.000 MB/sec)
[    0.183211] pinctrl core: initialized pinctrl subsystem
[    0.183460] regulator-dummy: no parameters
[    0.184673] Failed to find legacy iommu devices
[    0.185089] NET: Registered protocol family 16
[    0.188712] cpuidle: using governor ladder
[    0.192724] cpuidle: using governor menu
[    0.193043] vdso: 2 pages (1 code @ ffffff8008c36000, 1 data @ ffffff80091a4000)
[    0.193097] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.193634] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.208141] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
[    0.208223] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
[    0.208297] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
[    0.208372] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
[    0.208444] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
[    0.245587] raid6: int64x1  gen()   472 MB/s
[    0.262654] raid6: int64x1  xor()   410 MB/s
[    0.279744] raid6: int64x2  gen()   656 MB/s
[    0.296852] raid6: int64x2  xor()   595 MB/s
[    0.313956] raid6: int64x4  gen()   949 MB/s
[    0.331022] raid6: int64x4  xor()   671 MB/s
[    0.348122] raid6: int64x8  gen()   769 MB/s
[    0.365232] raid6: int64x8  xor()   630 MB/s
[    0.382341] raid6: neonx1   gen()   996 MB/s
[    0.399386] raid6: neonx1   xor()   675 MB/s
[    0.416526] raid6: neonx2   gen()  1332 MB/s
[    0.433609] raid6: neonx2   xor()   988 MB/s
[    0.450682] raid6: neonx4   gen()  1796 MB/s
[    0.467783] raid6: neonx4   xor()  1189 MB/s
[    0.484892] raid6: neonx8   gen()  1695 MB/s
[    0.501987] raid6: neonx8   xor()  1259 MB/s
[    0.502005] raid6: using algorithm neonx4 gen() 1796 MB/s
[    0.502024] raid6: .... xor() 1189 MB/s, rmw enabled
[    0.502043] raid6: using intx1 recovery algorithm
[    0.502940] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
[    0.502979] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
[    0.503229] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
[    0.503251] dc_12v: 12000 mV 
[    0.503429] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
[    0.503595] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
[    0.503646] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
[    0.503685] vcc3v3_pcie: supplied by dc_12v
[    0.503710] dc_12v: could not add device link regulator.2 err -2
[    0.503751] vcc3v3_pcie: 3300 mV 
[    0.503909] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
[    0.503960] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
[    0.503975] vcc1v8_s0: 1800 mV 
[    0.504122] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
[    0.504171] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[    0.504201] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
[    0.504234] vcc_sys: supplied by dc_12v
[    0.504257] dc_12v: could not add device link regulator.4 err -2
[    0.504296] vcc_sys: 5000 mV 
[    0.504445] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[    0.504495] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[    0.504513] vcc_phy: no parameters
[    0.504667] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[    0.504717] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
[    0.504737] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
[    0.504772] vcc3v3_sys: supplied by vcc_sys
[    0.504794] vcc_sys: could not add device link regulator.6 err -2
[    0.504820] vcc3v3_sys: 3300 mV 
[    0.504969] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[    0.505103] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
[    0.505144] vcc5v0_host: no parameters
[    0.505320] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
[    0.505904] iommu: Adding device ff8f0000.vop to group 0
[    0.505983] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
[    0.506002] iommu: Removing device ff8f0000.vop from group 0
[    0.506075] iommu: Adding device ff900000.vop to group 0
[    0.507341] SCSI subsystem initialized
[    0.507519] libata version 3.00 loaded.
[    0.507698] usbcore: registered new interface driver usbfs
[    0.507754] usbcore: registered new interface driver hub
[    0.507849] usbcore: registered new device driver usb
[    0.507959] media: Linux media interface: v0.10
[    0.508003] Linux video capture interface: v2.00
[    0.508073] pps_core: LinuxPPS API ver. 1 registered
[    0.508093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.508137] PTP clock support registered
[    0.509204] Advanced Linux Sound Architecture Driver Initialized.
[    0.509764] Bluetooth: Core ver 2.21
[    0.509806] NET: Registered protocol family 31
[    0.509825] Bluetooth: HCI device and connection manager initialized
[    0.509850] Bluetooth: HCI socket layer initialized
[    0.509873] Bluetooth: L2CAP socket layer initialized
[    0.509909] Bluetooth: SCO socket layer initialized
[    0.510291] NetLabel: Initializing
[    0.510311] NetLabel:  domain hash size = 128
[    0.510328] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.510379] NetLabel:  unlabeled traffic allowed by default
[    0.511176] clocksource: Switched to clocksource arch_sys_counter
[    0.562928] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.563204] NET: Registered protocol family 2
[    0.563667] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.563915] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.564667] TCP: Hash tables configured (established 32768 bind 32768)
[    0.564809] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.564973] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.565427] NET: Registered protocol family 1
[    0.565743] RPC: Registered named UNIX socket transport module.
[    0.565764] RPC: Registered udp transport module.
[    0.565783] RPC: Registered tcp transport module.
[    0.565801] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.565990] PCI: CLS 0 bytes, default 64
[    0.566541] Trying to unpack rootfs image as initramfs...
[    0.878120] Freeing initrd memory: 6204K
[    0.878695] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.878813] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.880033] kvm [1]: 8-bit VMID
[    0.880053] kvm [1]: Hyp mode initialized successfully
[    0.880208] kvm [1]: interrupt-controller@fff20000 IRQ10
[    0.880428] kvm [1]: timer IRQ12
[    0.883304] audit: initializing netlink subsys (disabled)
[    0.883370] audit: type=2000 audit(0.806:1): initialized
[    0.884121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.891232] VFS: Disk quotas dquot_6.6.0
[    0.891407] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.893087] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.894294] NFS: Registering the id_resolver key type
[    0.894341] Key type id_resolver registered
[    0.894360] Key type id_legacy registered
[    0.894391] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.895051] fuse init (API version 7.23)
[    0.895799] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.901710] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.903448] Key type big_key registered
[    0.903511] 
               TEE Core Framework initialization (ver 1:0.1)
[    0.903568] TEE armv7 Driver initialization
[    0.903992] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.904020] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.904234] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.908274] NET: Registered protocol family 38
[    0.908316] Key type asymmetric registered
[    0.908339] Asymmetric key parser 'x509' registered
[    0.908533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.908710] io scheduler noop registered
[    0.908735] io scheduler deadline registered (default)
[    0.908782] io scheduler cfq registered
[    0.909825] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
[    0.909838] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[    0.910110] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree
[    0.910121] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[    0.910133] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
[    0.910313] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
[    0.910394] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
[    0.911589] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
[    0.911600] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
[    0.912609] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
[    0.912620] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
[    0.912718] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
[    0.912727] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
[    0.915771] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.915812] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.917337] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.917373] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.918427] pwm-regulator vdd-log: GPIO lookup for consumer enable
[    0.918436] pwm-regulator vdd-log: using device tree for GPIO lookup
[    0.918447] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
[    0.918455] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
[    0.918463] pwm-regulator vdd-log: using lookup tables for GPIO lookup
[    0.918471] pwm-regulator vdd-log: lookup for GPIO enable failed
[    0.918495] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    0.918559] pwm-regulator: supplied by vcc_sys
[    0.918582] vcc_sys: could not add device link regulator.8 err -2
[    0.918652] vdd_log: 800 <--> 1400 mV at 896 mV 
[    0.919212] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.920776] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.037755] console [ttyS2] enabled
[    1.039087] [drm] Initialized drm 1.1.0 20060810
[    1.043156] [drm] Rockchip DRM driver version: v1.0.1
[    1.044105] usbcore: registered new interface driver udl
[    1.045888] Unable to detect cache hierarchy for CPU 0
[    1.047141] brd: module loaded
[    1.052858] loop: module loaded
[    1.053210] lkdtm: No crash points registered, enable through debugfs
[    1.055274] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    1.055880] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    1.056490] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    1.057603] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[    1.058095] 3 ofpart partitions found on MTD device spi32766.0
[    1.058642] Creating 3 MTD partitions on "spi32766.0":
[    1.059114] 0x000000000000-0x0000003f8000 : "loader"
[    1.060483] 0x0000003f8000-0x000000400000 : "env"
[    1.061720] 0x0000007c0000-0x000000800000 : "vendor"
[    1.064462] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
[    1.064542] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.065200] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    1.065717] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    1.066257] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.066977] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.067615] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.073184] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.073803] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.074274]  Ring mode enabled
[    1.074558]  DMA HW capability register supported
[    1.074961]  Normal descriptors
[    1.075290]  RX Checksum Offload Engine supported (type 2)
[    1.075787]  TX Checksum insertion supported
[    1.076185]  Wake-Up On Lan supported
[    1.076560]  Enable RX Mitigation via HW Watchdog Timer
[    1.077132] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
[    1.148070] libphy: stmmac: probed
[    1.148431] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    1.149027] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    1.151754] Rockchip WiFi SYS interface (V1.00) ... 
[    1.152346] usbcore: registered new interface driver cdc_ether
[    1.152940] usbcore: registered new interface driver rndis_host
[    1.155378] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    1.161736] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.164147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.164797] ehci-pci: EHCI PCI platform driver
[    1.165309] ehci-platform: EHCI generic platform driver
[    1.169893] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.170657] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.171542] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[    1.177213] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.178015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.178662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.179360] usb usb1: Product: EHCI Host Controller
[    1.179820] usb usb1: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e ehci_hcd
[    1.180629] usb usb1: SerialNumber: fe3c0000.usb
[    1.181658] hub 1-0:1.0: USB hub found
[    1.182049] hub 1-0:1.0: 1 port detected
[    1.183258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.183850] ohci-platform: OHCI generic platform driver
[    1.185029] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.185861] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.186729] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[    1.242398] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.243028] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.243726] usb usb2: Product: Generic Platform OHCI controller
[    1.244289] usb usb2: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e ohci_hcd
[    1.245086] usb usb2: SerialNumber: fe3e0000.usb
[    1.246096] hub 2-0:1.0: USB hub found
[    1.246504] hub 2-0:1.0: 1 port detected
[    1.249522] usbcore: registered new interface driver iforce
[    1.250118] usbcore: registered new interface driver xpad
[    1.251110] usbcore: registered new interface driver usbtouchscreen
[    1.252104] .. rk pwm remotectl v1.1 init
[    1.252859] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.254696] i2c /dev entries driver
[    1.256216] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
[    1.256229] fan53555-regulator 0-0040: using device tree for GPIO lookup
[    1.256271] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
[    1.256743] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.257420] fan53555-regulator 0-0040: Looking up vin-supply from device tree
[    1.257507] fan53555-reg: supplied by vcc_sys
[    1.257923] vcc_sys: could not add device link regulator.9 err -2
[    1.259383] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV 
[    1.260151] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
[    1.260162] fan53555-regulator 0-0041: using device tree for GPIO lookup
[    1.260223] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
[    1.260608] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.261278] fan53555-regulator 0-0041: Looking up vin-supply from device tree
[    1.261337] fan53555-reg: supplied by vcc_sys
[    1.261752] vcc_sys: could not add device link regulator.10 err -2
[    1.263453] vdd_gpu: 712 <--> 1500 mV at 1000 mV 
[    1.264610] rk808 0-001b: Pmic Chip id: 0x0
[    1.268510] rk808 0-001b: GPIO lookup for consumer dvs
[    1.268522] rk808 0-001b: using device tree for GPIO lookup
[    1.268536] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
[    1.268548] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[    1.268558] rk808 0-001b: using lookup tables for GPIO lookup
[    1.268568] rk808 0-001b: lookup for GPIO dvs failed
[    1.268579] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.269155] rk808 0-001b: GPIO lookup for consumer dvs
[    1.269164] rk808 0-001b: using device tree for GPIO lookup
[    1.269193] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
[    1.269205] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
[    1.269215] rk808 0-001b: using lookup tables for GPIO lookup
[    1.269224] rk808 0-001b: lookup for GPIO dvs failed
[    1.269235] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.269852] rk808 0-001b: Looking up vcc1-supply from device tree
[    1.269949] DCDC_REG1: supplied by vcc_sys
[    1.270358] vcc_sys: could not add device link regulator.11 err -2
[    1.270849] vdd_center: 900 mV 
[    1.271230] rk808 0-001b: Looking up vcc2-supply from device tree
[    1.271297] DCDC_REG2: supplied by vcc_sys
[    1.271691] vcc_sys: could not add device link regulator.12 err -2
[    1.272016] vdd_cpu_l: 750 <--> 1350 mV at 900 mV 
[    1.272373] rk808 0-001b: Looking up vcc3-supply from device tree
[    1.272428] DCDC_REG3: supplied by vcc_sys
[    1.272822] vcc_sys: could not add device link regulator.13 err -2
[    1.272866] vcc_ddr: at 5000 mV 
[    1.273141] rk808 0-001b: Looking up vcc4-supply from device tree
[    1.273207] DCDC_REG4: supplied by vcc_sys
[    1.273601] vcc_sys: could not add device link regulator.14 err -2
[    1.273828] vcc_1v8: 1800 mV 
[    1.274135] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.274202] LDO_REG1: supplied by vcc_sys
[    1.274588] vcc_sys: could not add device link regulator.15 err -2
[    1.275473] vcc1v8_dvp: 1800 mV 
[    1.275812] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.275862] LDO_REG2: supplied by vcc_sys
[    1.276266] vcc_sys: could not add device link regulator.16 err -2
[    1.277002] vcc3v0_touch: 3000 mV 
[    1.277361] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.277411] LDO_REG3: supplied by vcc_sys
[    1.277796] vcc_sys: could not add device link regulator.17 err -2
[    1.278535] vcc1v8_pmu: 1800 mV 
[    1.278879] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.278929] LDO_REG4: supplied by vcc_sys
[    1.279334] vcc_sys: could not add device link regulator.18 err -2
[    1.280072] vcc_sd: 1800 <--> 3300 mV at 3300 mV 
[    1.280444] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.280495] LDO_REG5: supplied by vcc_sys
[    1.280880] vcc_sys: could not add device link regulator.19 err -2
[    1.281614] vcca3v0_codec: 3000 mV 
[    1.281943] rk808 0-001b: Looking up vcc10-supply from device tree
[    1.281993] LDO_REG6: supplied by vcc_sys
[    1.282396] vcc_sys: could not add device link regulator.20 err -2
[    1.283181] vcc_1v5: 1500 mV 
[    1.283516] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.283567] LDO_REG7: supplied by vcc_sys
[    1.283953] vcc_sys: could not add device link regulator.21 err -2
[    1.284688] vcca1v8_codec: 1800 mV 
[    1.285044] rk808 0-001b: Looking up vcc11-supply from device tree
[    1.285096] LDO_REG8: supplied by vcc_sys
[    1.285502] vcc_sys: could not add device link regulator.22 err -2
[    1.286237] vcc_3v0: 3000 mV 
[    1.286589] rk808 0-001b: Looking up vcc8-supply from device tree
[    1.286643] SWITCH_REG1: supplied by vcc3v3_sys
[    1.287073] vcc3v3_sys: could not add device link regulator.23 err -2
[    1.287119] vcc3v3_s3: at 3300 mV 
[    1.287470] rk808 0-001b: Looking up vcc12-supply from device tree
[    1.287521] SWITCH_REG2: supplied by vcc3v3_sys
[    1.287951] vcc3v3_sys: could not add device link regulator.24 err -2
[    1.288121] vcc3v3_s0: at 3300 mV 
[    1.291876] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.292991] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d6000
[    1.294634] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094d8000
[    1.296527] fusb302 4-0022: GPIO lookup for consumer int-n
[    1.296539] fusb302 4-0022: using device tree for GPIO lookup
[    1.296581] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[    1.296616] fusb302 4-0022: GPIO lookup for consumer vbus-5v
[    1.296626] fusb302 4-0022: using device tree for GPIO lookup
[    1.296658] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[    1.296689] fusb302 4-0022: GPIO lookup for consumer vbus-other
[    1.296698] fusb302 4-0022: using device tree for GPIO lookup
[    1.296710] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.296722] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.296731] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.296742] fusb302 4-0022: lookup for GPIO vbus-other failed
[    1.296753] fusb302 4-0022: GPIO lookup for consumer discharge
[    1.296762] fusb302 4-0022: using device tree for GPIO lookup
[    1.296773] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.296784] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[    1.296794] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.296803] fusb302 4-0022: lookup for GPIO discharge failed
[    1.297034] fusb302 4-0022: Can't get property of role, set role to default DRP
[    1.306370] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[    1.307251] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094da000
[    1.309544] IR NEC protocol handler initialized
[    1.309978] IR RC5(x/sz) protocol handler initialized
[    1.310468] IR RC6 protocol handler initialized
[    1.310899] IR JVC protocol handler initialized
[    1.311343] IR Sony protocol handler initialized
[    1.311782] IR SANYO protocol handler initialized
[    1.312242] IR Sharp protocol handler initialized
[    1.312691] IR MCE Keyboard/mouse protocol handler initialized
[    1.313249] IR XMP protocol handler initialized
[    1.313896] usbcore: registered new interface driver uvcvideo
[    1.314444] USB Video Class driver (1.1.1)
[    1.315598] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
[    1.315895] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
[    1.316095] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
[    1.316247] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
[    1.316326] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
[    1.318614] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.319674] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    1.321811] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.322636] Bluetooth: Virtual HCI driver ver 1.5
[    1.323192] Bluetooth: HCI UART driver ver 2.3
[    1.323604] Bluetooth: HCI UART protocol H4 registered
[    1.324072] Bluetooth: HCI UART protocol LL registered
[    1.324550] Bluetooth: HCI UART protocol ATH3K registered
[    1.325105] usbcore: registered new interface driver bfusb
[    1.325693] usbcore: registered new interface driver btusb
[    1.326680] cpu cpu0: Failed to get leakage
[    1.327087] cpu cpu0: Looking up cpu-supply from device tree
[    1.327162] cpu cpu0: Failed to get pvtm
[    1.327791] cpu cpu4: Failed to get leakage
[    1.328229] cpu cpu4: Looking up cpu-supply from device tree
[    1.328283] cpu cpu4: Failed to get pvtm
[    1.328877] cpu cpu0: Looking up cpu-supply from device tree
[    1.329134] cpu cpu0: Looking up cpu-supply from device tree
[    1.330325] cpu cpu4: Looking up cpu-supply from device tree
[    1.332934] sdhci: Secure Digital Host Controller Interface driver
[    1.333513] sdhci: Copyright(c) Pierre Ossman
[    1.333918] Synopsys Designware Multimedia Card Interface Driver
[    1.335397] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.336084] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.336720] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.337314] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.338230] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.338971] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
[    1.338981] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
[    1.339010] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
[    1.339078] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.339666] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
[    1.339674] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.339685] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
[    1.339695] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
[    1.339702] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.339710] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
[    1.339719] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
[    1.339725] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.339733] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
[    1.339742] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
[    1.339749] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.339756] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
[    1.339907] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.340611] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.352237] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.363256] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.364076] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.365026] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
[    1.365035] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
[    1.365044] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
[    1.365052] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
[    1.365059] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
[    1.365067] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
[    1.366189] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
[    1.366200] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
[    1.366222] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
[    1.366231] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
[    1.366248] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.366799] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.393288] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.394977] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
[    1.395242] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
[    1.395553] hidraw: raw HID events driver (C) Jiri Kosina
[    1.399959] usbcore: registered new interface driver usbhid
[    1.400486] usbhid: USB HID core driver
[    1.404623] usbcore: registered new interface driver snd-usb-audio
[    1.406022] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@10[0]'
[    1.406034] es8316 1-0010: Can not read property spk_ctl_gpio
[    1.406601] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@10[0]' - status (0)
[    1.412316] u32 classifier
[    1.412590] Netfilter messages via NETLINK v0.30.
[    1.413067] ip_set: protocol 6
[    1.413567] Initializing XFRM netlink socket
[    1.414561] NET: Registered protocol family 10
[    1.415968] NET: Registered protocol family 17
[    1.416447] NET: Registered protocol family 15
[    1.416905] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.418109] Bridge firewalling registered
[    1.418805] Bluetooth: RFCOMM socket layer initialized
[    1.419309] Bluetooth: RFCOMM ver 1.11
[    1.419670] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.420271] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.420973] Bluetooth: HIDP socket layer initialized
[    1.421453] vcc_sd: ramp_delay not set
[    1.421462] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[    1.422200] 8021q: 802.1Q VLAN Support v1.8
[    1.422602] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.423266] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.423733] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[    1.424360] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.424998] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.425677] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
[    1.425684] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
[    1.425690] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
[    1.425721] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
[    1.425727] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.426548] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.427022] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.427500] [BT_RFKILL]: Enter rfkill_rk_init
[    1.428184] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
[    1.428190] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.428925] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
[    1.428944] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    1.428949] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.429687] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    1.429692] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
[    1.430430] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
[    1.430436] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.431695] [BT_RFKILL]: Request irq for bt wakeup host
[    1.432275] [BT_RFKILL]: ** disable irq
[    1.432823] [BT_RFKILL]: bt_default device registered.
[    1.433431] Key type dns_resolver registered
[    1.435144] Registered cp15_barrier emulation handler
[    1.435765] Registered setend emulation handler
[    1.437939] registered taskstats version 1
[    1.441525] Btrfs loaded, integrity-checker=on
[    1.442067] BTRFS: selftest: Running btrfs free space cache tests
[    1.442679] BTRFS: selftest: Running extent only tests
[    1.443193] BTRFS: selftest: Running bitmap only tests
[    1.443692] BTRFS: selftest: Running bitmap and extent tests
[    1.444258] BTRFS: selftest: Running space stealing from bitmap to extent
[    1.446341] BTRFS: selftest: Free space cache tests finished
[    1.446867] BTRFS: selftest: Running extent buffer operation tests
[    1.447417] BTRFS: selftest: Running btrfs_split_item tests
[    1.448020] BTRFS: selftest: Running find delalloc tests
[    1.451582] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.652687] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 166
[    1.653351] mmc0: new ultra high speed SDR50 SDHC card at address e624
[    1.654832] mmcblk0: mmc0:e624 SL08G 7.40 GiB 
[    1.661068] BTRFS: selftest: Running btrfs_get_extent tests
[    1.661650]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    1.662712] BTRFS: selftest: Running hole first btrfs_get_extent test
[    1.663507] BTRFS: selftest: Running outstanding_extents tests
[    1.664056] BTRFS: selftest: Running qgroup tests
[    1.664484] BTRFS: selftest: Qgroup basic add
[    1.664902] BTRFS: selftest: Qgroup multiple refs test
[    1.678331] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
[    1.678339] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[    1.678805] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree
[    1.678810] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[    1.678819] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
[    1.679978] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
[    1.680042] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
[    1.680913] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
[    1.680919] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
[    1.680977] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
[    1.680981] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
[    1.681570] rockchip-drm display-subsystem: devfreq is not set
[    1.682282] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.682979] rockchip-vop ff900000.vop: unable to request PWM
[    1.683493] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008cffcf8)
[    1.684234] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.684880] rockchip-vop ff8f0000.vop: unable to request PWM
[    1.685391] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008cffcf8)
[    1.686776] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.687575] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.688728] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.692782] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cf6010)
[    1.694926] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008cf6f60)
[    1.695836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.696533] [drm] No driver support for vblank timestamp query.
[    1.697363] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    1.698757] rockchip-drm display-subsystem: failed to parse loader memory
[    1.868832] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 2560x1440p60, type: 11
[    1.891905] dwhdmi-rockchip ff940000.hdmi: Rate 241500000 missing; compute N dynamically
[    2.007562] Console: switching to colour frame buffer device 320x90
[    2.089042] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.105105] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.106536] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[    2.107602] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    2.108571] xhci-hcd xhci-hcd.5.auto: irq 223, io mem 0xfe800000
[    2.109362] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.110074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.110838] usb usb3: Product: xHCI Host Controller
[    2.111361] usb usb3: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e xhci-hcd
[    2.112257] usb usb3: SerialNumber: xhci-hcd.5.auto
[    2.113926] hub 3-0:1.0: USB hub found
[    2.114426] hub 3-0:1.0: 1 port detected
[    2.115112] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.115948] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[    2.116814] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.117758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.118480] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.119252] usb usb4: Product: xHCI Host Controller
[    2.119766] usb usb4: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e xhci-hcd
[    2.120686] usb usb4: SerialNumber: xhci-hcd.5.auto
[    2.121879] hub 4-0:1.0: USB hub found
[    2.122307] hub 4-0:1.0: 1 port detected
[    2.124033] xhci-hcd xhci-hcd.5.auto: remove, state 1
[    2.124598] usb usb4: USB disconnect, device number 1
[    2.148995] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microseconds.
[    2.149762] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting reset.
[    2.150599] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered
[    2.151522] xhci-hcd xhci-hcd.5.auto: remove, state 1
[    2.152167] usb usb3: USB disconnect, device number 1
[    2.153771] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
[    2.161674] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    2.162682] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
[    2.163642] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    2.164602] xhci-hcd xhci-hcd.6.auto: irq 224, io mem 0xfe900000
[    2.165363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.166075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.166838] usb usb3: Product: xHCI Host Controller
[    2.167360] usb usb3: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e xhci-hcd
[    2.168257] usb usb3: SerialNumber: xhci-hcd.6.auto
[    2.169544] hub 3-0:1.0: USB hub found
[    2.169974] hub 3-0:1.0: 1 port detected
[    2.170647] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    2.171437] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
[    2.172329] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.173258] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.173970] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.174736] usb usb4: Product: xHCI Host Controller
[    2.175263] usb usb4: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e xhci-hcd
[    2.176152] usb usb4: SerialNumber: xhci-hcd.6.auto
[    2.177361] hub 4-0:1.0: USB hub found
[    2.177776] hub 4-0:1.0: 1 port detected
[    2.182573] ehci-platform fe380000.usb: EHCI Host Controller
[    2.183631] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    2.184585] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[    2.191440] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.192402] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.193115] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.193879] usb usb5: Product: EHCI Host Controller
[    2.194403] usb usb5: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e ehci_hcd
[    2.195298] usb usb5: SerialNumber: fe380000.usb
[    2.196632] hub 5-0:1.0: USB hub found
[    2.197052] hub 5-0:1.0: 1 port detected
[    2.198343] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.206951] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    2.215473] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[    2.278712] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.305843] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.332857] usb usb6: Product: Generic Platform OHCI controller
[    2.359653] usb usb6: Manufacturer: Linux 4.4.132-1072-rockchip-ayufan-ga1d27dba5a2e ohci_hcd
[    2.386876] usb usb6: SerialNumber: fe3a0000.usb
[    2.415136] hub 6-0:1.0: USB hub found
[    2.426299] hub 6-0:1.0: 1 port detected
[    2.438381] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
[    2.438395] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
[    2.488540] usb 3-1: new low-speed USB device number 2 using xhci-hcd
[    2.536376] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
[    2.547858] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[    2.559138] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[    2.570484] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[    2.581574] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
[    2.593289] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
[    2.602684] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
[    2.612080] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
[    2.621324] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
[    2.630476] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
[    2.639966] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
[    2.650250] usb 3-1: New USB device found, idVendor=046a, idProduct=b090
[    2.650256] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.650260] usb 3-1: Product: USB keyboard
[    2.650263] usb 3-1: Manufacturer: Cherry
[    2.692360] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.700322] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    2.702309] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[    2.702314] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[    2.702819] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    2.708155] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:08 UTC (1358499008)
[    2.708189] of_cfs_init
[    2.708216] of_cfs_init: OK
[    2.727474] vcc3v3_pcie: disabling
[    2.728028] rk-keypad rockchip-key: no io-channels defined
[    2.728113] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[    2.728133] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[    2.728332] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
[    2.729601] ALSA device list:
[    2.729604]   #0: rockchip,es8316-codec
[    2.729606]   #1: ROCKCHIP,SPDIF
[    2.783067] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.783904] ttyS2 - failed to request DMA, use interrupt mode
[    2.784489] Freeing unused kernel memory: 1152K
[    2.819064] input: Cherry USB keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.6.auto/usb3/3-1/3-1:1.0/0003:046A:B090.0001/input/input2
[    2.879254] hid-generic 0003:046A:B090.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry USB keyboard] on usb-xhci-hcd.6.auto-1/input0
[    2.901755] input: Cherry USB keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.6.auto/usb3/3-1/3-1:1.1/0003:046A:B090.0002/input/input3
[    2.961796] hid-generic 0003:046A:B090.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Cherry USB keyboard] on usb-xhci-hcd.6.auto-1/input1
[    3.096002] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
[    3.100961] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16
[    3.106312] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    3.106785] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
[    3.106886] mali ff9a0000.gpu: Failed to get leakage
[    3.106896] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    3.106915] vdd_gpu: could not add device link ff9a0000.gpu err -17
[    3.106920] vdd_gpu: Failed to create debugfs directory
[    3.106925] mali ff9a0000.gpu: Failed to get pvtm
[    3.107989] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.108294] mali ff9a0000.gpu: Protected mode not available
[    3.108755] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.108855] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 399; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.109501] mali ff9a0000.gpu: Probed as mali0
[    3.114105] phy phy-pcie-phy.9: Looking up phy-supply from device tree
[    3.114109] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
[    3.140784] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to create Playback debugfs file
[    3.146288] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
[    3.146296] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
[    3.146318] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
[    3.146488] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
[    3.146577] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
[    3.146584] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
[    3.146605] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    3.150607] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
[    3.150617] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
[    3.150637] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    3.154650] rockchip-pcie f8000000.pcie: invalid power supply
[    3.286063] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
[    3.658752] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    3.670211] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
[    3.688436] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    3.727007] systemd[1]: System time before build time, advancing clock.
[    3.800713] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.832682] cgroup: cgroup2: unknown option "nsdelegate"
[    3.869197] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.883823] systemd[1]: Detected architecture arm64.
[    3.911437] systemd[1]: Set hostname to <rockpro64>.
[    4.196483] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    4.208349] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    4.491835] random: systemd: uninitialized urandom read (16 bytes read, 89 bits of entropy available)
[    4.523671] systemd[1]: Reached target Swap.
[    4.557422] random: systemd: uninitialized urandom read (16 bytes read, 90 bits of entropy available)
[    4.571189] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.587360] random: systemd: uninitialized urandom read (16 bytes read, 90 bits of entropy available)
[    4.598951] systemd[1]: Reached target Remote File Systems.
[    4.612344] random: systemd: uninitialized urandom read (16 bytes read, 90 bits of entropy available)
[    4.623107] systemd[1]: Created slice User and Session Slice.
[    4.635341] random: systemd: uninitialized urandom read (16 bytes read, 90 bits of entropy available)
[    4.645576] systemd[1]: Reached target System Time Synchronized.
[    4.656860] random: systemd: uninitialized urandom read (16 bytes read, 90 bits of entropy available)
[    4.674387] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.693332] random: systemd: uninitialized urandom read (16 bytes read, 91 bits of entropy available)
[    4.703807] systemd[1]: Reached target Local Encrypted Volumes.
[    4.729464] random: systemd: uninitialized urandom read (16 bytes read, 91 bits of entropy available)
[    4.740113] systemd[1]: Started ntp-systemd-netif.path.
[    4.752351] random: systemd: uninitialized urandom read (16 bytes read, 91 bits of entropy available)
[    4.763512] systemd[1]: Created slice System Slice.
[    4.775687] random: systemd: uninitialized urandom read (16 bytes read, 91 bits of entropy available)
[    4.787367] systemd[1]: Listening on Journal Socket.
[    4.797821] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    4.828869] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.842784] systemd[1]: Listening on Syslog Socket.
[    4.862170] systemd[1]: Mounting Kernel Debug File System...
[    4.876260] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
[    4.934521] systemd[1]: Reached target Slices.
[    4.954798] systemd[1]: Starting Set the console keyboard layout...
[    4.972027] systemd[1]: Listening on udev Control Socket.
[    4.989549] systemd[1]: Mounting POSIX Message Queue File System...
[    5.004697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.018076] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.031990] systemd[1]: Listening on Journal Audit Socket.
[    5.047098] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.068330] systemd[1]: Starting Nameserver information manager...
[    5.092155] systemd[1]: Starting Restore / save the current clock...
[    5.111288] systemd[1]: Starting Load Kernel Modules...
[    5.124685] systemd[1]: Listening on udev Kernel Socket.
[    5.139797] systemd[1]: Starting udev Coldplug all Devices...
[    5.155819] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.177760] systemd[1]: Starting Journal Service...
[    5.194482] systemd[1]: Mounting Huge Pages File System...
[    5.214384] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.225040] systemd[1]: Mounted Kernel Debug File System.
[    5.233096] systemd[1]: Started Set the console keyboard layout.
[    5.240610] systemd[1]: Mounted POSIX Message Queue File System.
[    5.247965] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.257858] systemd[1]: Started Restore / save the current clock.
[    5.266121] systemd[1]: Started Load Kernel Modules.
[    5.275641] systemd[1]: Mounted Huge Pages File System.
[    5.284059] systemd[1]: Started Nameserver information manager.
[    5.292606] systemd[1]: Reached target Network (Pre).
[    5.301440] systemd[1]: Mounting Kernel Configuration File System...
[    5.310354] systemd[1]: Starting Apply Kernel Variables...
[    5.319348] systemd[1]: Mounting FUSE Control File System...
[    5.328754] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.349093] systemd[1]: Starting Load/Save Random Seed...
[    5.356486] systemd[1]: Started Journal Service.
[    5.397313] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    5.400358] systemd-journald[280]: File /var/log/journal/c7943653e56248499d168d5da7467499/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.825920] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
[    5.825932] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
[    5.825954] ff100000.saradc supply vref not found, using dummy regulator
[    5.838508] random: nonblocking pool is initialized
[    5.951226] [BT_RFKILL]: bt shut off power
[    6.135902] FAT-fs (mmcblk0p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    6.838379] zram: Added device: zram0
[    6.840490] zram: Added device: zram1
[    6.841819] zram: Added device: zram2
[    6.842536] zram: Added device: zram3
[    6.843287] zram: Added device: zram4
[    6.844271] zram: Added device: zram5
[    6.923346] zram0: detected capacity change from 0 to 338698240
[    7.007357] Adding 330756k swap on /dev/zram0.  Priority:5 extents:1 across:330756k SS
[    7.010120] zram1: detected capacity change from 0 to 338698240
[    7.031888] Adding 330756k swap on /dev/zram1.  Priority:5 extents:1 across:330756k SS
[    7.033537] zram2: detected capacity change from 0 to 338698240
[    7.048083] Adding 330756k swap on /dev/zram2.  Priority:5 extents:1 across:330756k SS
[    7.053748] zram3: detected capacity change from 0 to 338698240
[    7.069657] Adding 330756k swap on /dev/zram3.  Priority:5 extents:1 across:330756k SS
[    7.071364] zram4: detected capacity change from 0 to 338698240
[    7.093096] Adding 330756k swap on /dev/zram4.  Priority:5 extents:1 across:330756k SS
[    7.095133] zram5: detected capacity change from 0 to 338698240
[    7.116825] Adding 330756k swap on /dev/zram5.  Priority:5 extents:1 across:330756k SS
[    7.722416] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
