PINE64

Full Version: Not able to boot Armbian 5.75@Rock64 4GB
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,

i'll trying since days to boot following image on my Rock64:
Armbian_5.75_Rock64_Debian_stretch_default_4.4.174

Flashed it via etcher without any problem.

As soon as I boot I'll get after one minte a Exception stack ....
Exception Stack

I'm able to flash and boot Ubuntu 18.04 Bionic minimal 32bit Image.
There I have troubles to find/install the WLAN adapter.

I wanted to buil a Home-SIEM with the Rock64 (https://medium.com/@fbotes2/secure-dns-i...faa85bd833)

My Setup:
ROCK64 SINGLE BOARD COMPUTER
DRAM: 4GB 
ROCK64 USB 3.0 Dual Band 1200Mbps WIFI 802.11A/B/G/N/AC (RTL8812AU) Adapter
1 $21.99
32GB CLASS10 MICROSD CARD

Have somebody a clue or hint?
i installed a copy of this last week and it worked good. i'd suggest unplugging the usb wifi card and then boot to see if that is causing the issue. if it still does not boot try burning another image. wait until you go through the setup and get a desktop and then insert the wifi adapter.