I am using 4.4.132-1075-rockchip-ayufan kernel on Rockpro64 4GB board.
I boot from PCIe SSD as roofs and USB3 connecting a Seagate 2TB hard drive.
I recently notice this error:
Code:
xhci-hcd xhci-hcd.6.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
How to solve the error?
Thanks in advance.
I was so annoyed by the mistake that I switched to Armbian. Since the error does not appear anymore.
(12-22-2018, 01:17 AM)Bullet64 Wrote: [ -> ]I was so annoyed by the mistake that I switched to Armbian. Since the error does not appear anymore.
For Rock64, I switched to Armbian, it seems pretty good to me, the 4 cores are all using the maximum frequency of RK3328: 1.5 Ghz
Pine64 stocked image for Rock64 is limited to 1.2Ghz
For Rockpro64, I assume, in Armbian, it will use 2.0 Ghz to 2 big cores, 1.5Ghz for 4 LITTLE cores.
Could you confirm with me from your board? Thank you in advance.
I have NanoPC T4 using the same RK3399 CPU as Rockpro64. With Armbian, I can achieve: 2.0 Ghz of 2 big cores, 1.5Ghz for 4 LITTLE cores, boot from NVMe as rootfs.
I don't know why board manufactures are so conservative to use 1.8 Ghz for 2 big cores and 1.3Ghz for 4 LITTLE cores.
(12-23-2018, 01:15 PM)Bullet64 Wrote: [ -> ]I think this screenshot will answer your questions.
https://nextcloud.frank-mankel.org/s/JqeaCiTxDHagqeC
Looks really good to me. I should start it with Armbian at beginning!
Now I need to reinstall all those software again:
Apache2, Tomcat, MySQL, Guacamole, Seafile, Nextcloud, PLEX etc...