09-28-2018, 02:37 PM
I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
(09-28-2018, 05:02 PM)jnoxon Wrote: [ -> ]I got eMMC working by flashing SPI from here:jnoxon Can you provide details whet did you done to run booting from emmc?
https://github.com/ayufan-rock64/linux-u...df02018479
(09-28-2018, 02:37 PM)Takenover83 Wrote: [ -> ]I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
(10-13-2018, 03:23 AM)jarcik Wrote: [ -> ]I still have not.(09-28-2018, 02:37 PM)Takenover83 Wrote: [ -> ]I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the I sitll tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
Did you found solution?
(10-13-2018, 11:59 AM)Takenover83 Wrote: [ -> ](10-13-2018, 03:23 AM)jarcik Wrote: [ -> ]I still have not.(09-28-2018, 02:37 PM)Takenover83 Wrote: [ -> ]I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the I sitll tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
Did you found solution?
(10-14-2018, 12:52 PM)jarcik Wrote: [ -> ]I did. That's how I came to the realization that the EMMC can be used if I am not using it to boot. I found out by accident. I was attempting to boot from usb via spi/u-boot when I finally got my rootfs that was on the emmc to boot. It pulled the boot partition from the usb, then booted the rootfs from emmc. But I have yet to get the emmc to work alone.(10-13-2018, 11:59 AM)Takenover83 Wrote: [ -> ](10-13-2018, 03:23 AM)jarcik Wrote: [ -> ]I still have not.(09-28-2018, 02:37 PM)Takenover83 Wrote: [ -> ]I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the I sitll tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
Did you found solution?
Did you try flash spi with u-boot (https://github.com/ayufan-rock64/linux-u...df02018479 ), jnoxon wrote that helped him with boot from emmc
(10-14-2018, 12:52 PM)jarcik Wrote: [ -> ](10-13-2018, 11:59 AM)Takenover83 Wrote: [ -> ](10-13-2018, 03:23 AM)jarcik Wrote: [ -> ]I still have not.(09-28-2018, 02:37 PM)Takenover83 Wrote: [ -> ]I just want to note, I did try booting from a sd card, and using dd to copy the image over to the emmc via the I sitll tutorial in the guide section. Tutorial worked fine, but unfortunately my board still would not boot from the emmc.
Did you found solution?
Did you try flash spi with u-boot (https://github.com/ayufan-rock64/linux-u...df02018479 ), jnoxon wrote that helped him with boot from emmc