PINE64

Hi Guys,

This morning I swapped out the 16 Gb emmc module for a bigger 64Gb one. Opening the case was easy! After rebooting from a know working SD card I simply tried to run
/usr/local/sbin/pine_install_to_emmc.sh xenial-mate I get 'You should boot from SD card' ,which I did....

Any help how to continue would be appreciated. Do I need to partition the drive first? I the emmc drive broken? (I checked it is firmly inserted...)


Erik

(08-24-2017, 02:18 AM)Erik Wrote: [ -> ]Hi Guys,

This morning I swapped out the 16 Gb emmc module for a bigger 64Gb one. Opening the case was easy! After rebooting from a know working SD card I simply tried to run
/usr/local/sbin/pine_install_to_emmc.sh xenial-mate I get 'You should boot from SD card' ,which I did....

Any help how to continue would be appreciated. Do I need to partition the drive first? I the emmc drive broken? (I checked it is firmly inserted...)


Erik

1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19