I just flash android OS in rock64 anh complete. I have tried many time to connect to Ethernet but it can not, I realy don't know how to setting the internet for rock64 4GB ram. Please help me to solve this problem. Thanks a lot
The Ethernet connection should just work. Is there anything unusual about your setup?
hi, meet us on irc (see address below) and we'll help you live.
Hi MarkHaysHarris777
I don't know how to connect to IRC,
(08-18-2017, 09:40 AM)fire219 Wrote: [ -> ]The Ethernet connection should just work. Is there anything unusual about your setup?
I complete flash Android and then connect LAN wire for ethernet, but nothing happen, I cannot ad my Google account and didn't do anything in internet. I cannot find the ethernet setting also.
(08-18-2017, 10:44 AM)MarkHaysHarris777 Wrote: [ -> ]hi, meet us on irc (see address below) and we'll help you live.
I have flash Android 5 times on Rock64, but It still has not Ethernet. It didn't see the IP address.
(08-20-2017, 02:47 PM)Luke Wrote: [ -> ]Just to confirm - something must have changed from pre-production board (where I am getting networking to work just fine) to production board, where I too cannot connect to my lan or the internet. No activity on the LEDs. I already pointed it out to ayufan in the chat. As a side note, I think its tied to the issue with 2 eth connections appearing in Linux (something not present on pre-pro unit).
Actually lukasz, its the other way round. The two eth0 & eth1 are showing up on the new build 0.4.16 on the pre pro unit !! ... and not the production board.
My production board xenial-minimal 0.4.16 had one eth0; my pre pro unit has two eth0 & eth1; both with the same mac addy ( addy bug ) but the eth1 is clearly the internal 10|100 PHY. The eth0 is the Gbe PHY .
( just for the record )
(08-20-2017, 05:04 PM)MarkHaysHarris777 Wrote: [ -> ] (08-20-2017, 02:47 PM)Luke Wrote: [ -> ]Just to confirm - something must have changed from pre-production board (where I am getting networking to work just fine) to production board, where I too cannot connect to my lan or the internet. No activity on the LEDs. I already pointed it out to ayufan in the chat. As a side note, I think its tied to the issue with 2 eth connections appearing in Linux (something not present on pre-pro unit).
Actually lukasz, its the other way round. The two eth0 & eth1 are showing up on the new build 0.4.16 on the pre pro unit !! ... and not the production board.
My production board xenial-minimal 0.4.16 had one eth0; my pre pro unit has two eth0 & eth1; both with the same mac addy ( addy bug ) but the eth1 is clearly the internal 10|100 PHY. The eth0 is the Gbe PHY .
( just for the record )
Correct, I forgot to cross out or delete what I wrote before I went to bed - will do so now.
However, the networking chip has changed since pre-production units. Networking works for Thomas in IRC on a 4Gb production board but it doesn't work on my, presumably identical to his, 4Gb production board.
(08-21-2017, 01:19 AM)Luke Wrote: [ -> ] (08-20-2017, 05:04 PM)MarkHaysHarris777 Wrote: [ -> ] (08-20-2017, 02:47 PM)Luke Wrote: [ -> ]Just to confirm - something must have changed from pre-production board (where I am getting networking to work just fine) to production board, where I too cannot connect to my lan or the internet. No activity on the LEDs. I already pointed it out to ayufan in the chat. As a side note, I think its tied to the issue with 2 eth connections appearing in Linux (something not present on pre-pro unit).
Actually lukasz, its the other way round. The two eth0 & eth1 are showing up on the new build 0.4.16 on the pre pro unit !! ... and not the production board.
My production board xenial-minimal 0.4.16 had one eth0; my pre pro unit has two eth0 & eth1; both with the same mac addy ( addy bug ) but the eth1 is clearly the internal 10|100 PHY. The eth0 is the Gbe PHY .
( just for the record )
Correct, I forgot to cross out or delete what I wrote before I went to bed - will do so now.
However, the networking chip has changed since pre-production units. Networking works for Thomas in IRC on a 4Gb production board but it doesn't work on my, presumably identical to his, 4Gb production board.
oh, what a nightmare.
When they make changes like that they need to notify the community;
Newest release should solve the GbE Ethernet issue.
edit: it does not.