03-14-2016, 02:54 AM
(03-13-2016, 10:17 PM)Artyom Wrote: [ -> ](03-13-2016, 03:59 PM)tllim Wrote: [ -> ](03-13-2016, 10:40 AM)Artyom Wrote: [ -> ](03-13-2016, 12:33 AM)tllim Wrote: [ -> ](03-13-2016, 12:14 AM)Artyom Wrote: [ -> ]I found a factory in Russia that produces lithium-polymer batteries for the order. This can solve the problem by purchasing batteries for Russia and CIS countries. If you are interested, write to me. Still awaiting a response to a question on the geometric size (external and internal) Waterproof Case.This is good news. Please pass me the LiPo battery info and I can provide some advise.
Factory Offer:
- The price of 12 rubles per 100mAh (17 US cents per 100 mAh)
- Proof of compliance with the declared characteristics.
- Assembling the necessary configuration
- Application temperature up to - 40 ° C
- The specific energy consumption of up to 250 Wh / kg
Attached is the complete list of lithium-polymer battery that produces the factory (3.7 volts).Attached is the complete list of lithium-polymer battery that produces the factory (3.7 volts).
Operating temperature range (from -20 to +50 degrees Celsius).
https://yadi.sk/i/7uhv-ORIq94iA
By the way, check your private messages. I already wrote about the board for developers.
Capacity a bit too low. Better to have something between 4,000-10,000 mAH, Pine A64 board consumes about 700mA per hour.
In fact, I'm going to take something to 21000mAh. That is why I want the size of the waterproof case.