PINE64

Hi

I now have my pine64plus broad and need to know which way to install Wifi/Bluetooth module on it
because module the fits both ways
Have looked for a photo that shows this

Look closely at the pins on the board and the connectors on the module. They are offset slightly. It will only go on one way with all the pins being used. Note the location of the antenna on the module itself in the picture below:

(10-08-2016, 09:16 PM)Bluphire Wrote: [ -> ]Look closely at the pins on the board and the connectors on the module. They are offset slightly. It will only go on one way with all the pins being used. Note the location of the antenna on the module itself in the picture below:

Thank you!!