PINE64

Hi,

I have downloaded debian base and xfce images from pine.pro and followed the 'getting started' linux instructions for dd'ing. Using either of these images to boot Pine64 causes the pwr LED to go out after about 2 seconds.

I have two 2GB boards which boot correctly with RemixOS or Android on SDcards provided by Pine64. Now I am using different SDcards for Debian but they are new Samsung EVO class 10 cards purchased from Newegg. I'll review the wiki about counterfeit cards though I think that is a dead end.

Other thoughts:

- MD5 good.
- e2fsck -nf good on ROOTFS.

# lsblk /dev/sdf
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sdf      8:80   1 29.8G  0 disk 
├─sdf1   8:81   1   50M  0 part 
└─sdf2   8:82   1    3G  0 part

Thanks,

HenryD

PS. dd with bs=1m returns 'invalid number'. 1M worked. (From the 'Getting started' instructions.)

Made the correction to the bs=1m to bs=1M sorry I missed it

Lenny,

Happy to be of some small help.




My boot problem was resolved by a cold boot.. that is using the pwr btn for on/off is more like on/sleep.

HenryD