PINE64

Full Version: SSH From Outside LAN not working
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi all. Not sure how many of you have tried to SSH into your pine64 (using debian image) from outside of the LAN. I am unable to do so. Here are some things I have discovered to help.

1. I have a Raspberry Pi that I can SSH into from the outside. I have a router/modem combo from COX and can SSH from the outside and inside the LAN just fine. And strange enough, I don't even have to forward any ports to do this.
2. I tried to open the port on the router and looks like that doesn't matter one way or another.
3. When the RPi is plugged in to the router/modem, when I check the port 22 on a website, I enter my outside LAN IP and scan port 22 opens. When I remove the RPi and scan again port 22 closes.
4. With the pine64, I have the SSH setup. I can ssh to it from inside my lan network. Can't access outside my LAN.
5. Ran nmap
Code:
sudo nmap -p22 **outside LAN IP**
 on my pine64 and it says port 22 is filtered. Now I haven't checked if it says open with RPi only attached to the router/modem but will try that.

6. Ran tcpdump
Code:
tcpdump -i eth0 port 22 -n -Q inout

and it doesn't even detect traffic at all, so then I think it's a router issue.
I'm trying every trick I can think of. Anyone have some ideas as to what is going on? If you need more info, just ask! Thanks for the help in advance!