NetBSD will does not install to eMMC
#3
(05-15-2019, 08:38 AM)haukef Wrote:
(05-14-2019, 02:53 PM)ronverbs Wrote: I downloaded the NetBSD Pinebook image from invisible.ca (https://www.invisible.ca/arm/) and created a microSD card, as directed using Etcher. My Pinebook (1080p) booted, but when I dd'd the image to /dev/rdl2c I got a ton of errors. Now my Pinebook does not boot, unless there is a SD card inserted.

arm64# dd if=NetBSD-evbarm-aarch64-201905120950Z-pinebook.img of=/dev/rld2c bs=1m conv=sync
    dd: /dev/rld2c: Input/output error
    30+0 records in
    29+0 records out
    30408704 bytes transferred in 11.143 secs (2728951 bytes/sec)
This generated a ton of "ld2c: error writing fsbn..." errors. When I reboot I get a blank screen.

The bs=1M sounds excessive... depending on the hardware, there are limitations on the block size the kernel will handle. 
Oh, and leave out the conv=sync? The man page says "Pad every input block to the input buffer size." - you don't want that.

Maybe re-try with something like 

dd if=NetBSD-evbarm-aarch64-201905120950Z-pinebook.img of=/dev/rld2c bs=32k

?

Thank you for your response. I did try that and got the same response, that is dd errors and a blank screen upon rebooting. For now I may stick with KDE Neon. At least that works. Sad though, I am such a NetBSD fan boy.


Messages In This Thread
RE: NetBSD will does not install to eMMC - by ronverbs - 05-15-2019, 10:57 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  NetBSD images for the pine (and other boards) e-minguez 9 9,463 08-20-2019, 02:56 AM
Last Post: e-minguez
  NetBSD binary pkgsrc-current for Pinebook astr0baby 16 16,278 05-24-2019, 11:58 AM
Last Post: Luke

Forum Jump:


Users browsing this thread: 1 Guest(s)