RPi.GPIO python module for Pine A64/A64+
#56
(08-10-2016, 04:53 PM)MarkHaysHarris777 Wrote: @DonFL, confirmed:  

GPIO.setmode(GPIO.BOARD)
GPIO.setup(40, GPIO.OUT)

... will get an error channel not valid on a Raspberry PI.  Either the RPi.GPIO-PineA64 codes were ported from the 26 pin GPIO stuff... or else, this is an over-sight (a bug, for sure).

The work-around (as DonFL has noted) is to code  GPIO.setmode(GPIO.BCM).  then all of the channels may be setup, with the exception that some of the channels (GPIO04) apparently do not work.  Need to dive into the code to find out, because that doesn't make any sense.

This issue has been fixed. Updated code is at the github location: https://github.com/swkim01/RPi.GPIO-PineA64
  Reply


Messages In This Thread
RE: RPi.GPIO python module for Pine A64/A64+ - by DonFL - 08-16-2016, 06:15 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  fm transmitter with gpio weasel18 2 4,849 09-10-2019, 04:28 AM
Last Post: desai_amogh
  How to use dts or other setup to declare gpio pin Interrupt (e.g. a button)? dkebler 1 3,614 06-12-2019, 10:37 AM
Last Post: dkebler
Lightbulb Sample GPIO codes highlighting RPi.GPIO-PineA64 and the PI bus MarkHaysHarris777 6 11,181 06-07-2019, 12:37 AM
Last Post: tllim
Star GPIO, SPI and I2C C++ Lib databit 7 11,253 02-04-2019, 05:45 AM
Last Post: Jeff R
Information Howto: Controlling Pine64 GPIO via the filesystem (sysfs) on linux pfeerick 4 11,902 01-24-2019, 03:36 AM
Last Post: Fifth
  GPIO and SPI SamR1 20 31,740 03-15-2018, 10:32 AM
Last Post: jomoengineer
Question GPIO shockr 7 14,834 03-11-2018, 01:52 AM
Last Post: jomoengineer
  Read GPIO problem shworker 14 21,261 08-17-2017, 01:21 PM
Last Post: martinayotte
  Cross-wired Uart Ports between two Pine Boards via Cat5 Cable MarkHaysHarris777 10 16,076 11-20-2016, 04:17 AM
Last Post: pfeerick
  GPIO fiq capability joseph 3 6,124 11-10-2016, 06:07 PM
Last Post: joseph

Forum Jump:


Users browsing this thread: 2 Guest(s)