My "rockpro64" is different from the public circuit diagram.
#1
"ROCKPro64 Schematic v2.1 (Second Batch Production Release)"
http://files.pine64.org/doc/rockpro64/ro...21-SCH.pdf

Question 1)
In the above published circuit diagram (Sheet of "CODEC/Head phone")
"R225 = DNP,   R226 = 0R" is presented.

However, the result of examining my "rockpro64" is
"R225 = 10kΩ, R226 = DNP".

Please tell me whether this difference is due to the production lot or just the mistake of the circuit diagram.
*) I think that it is merely a mistake in the circuit diagram.


Question 2)
Connection of headphone-jack = "J16:pj_35A063" is obviously wrong.
*) I think that the top and bottom are connected in reverse.

Please introduce the datasheet of "pj_35A063" or present the correct circuit diagram.
I searched the datasheet for "pj_35A063", but I could not find it.

As for the signal name "HPGND / HPOL / HPOR", its connection relation can be inferred.
However, as for the signal name "PHONE_DET / MIC_IN 2 P",
since the specification of "pj_35A063" is unknown,
it is impossible to infer the correct connection relation.

---
My "rockpro64" is a "RAM=4GB" version, and it arrived in 2018-August.
I think that it is probably the "second batch production" lot.
#2
(09-29-2018, 03:20 AM)t4_4t Wrote: "ROCKPro64 Schematic v2.1 (Second Batch Production Release)"
http://files.pine64.org/doc/rockpro64/ro...21-SCH.pdf

Question 1)
In the above published circuit diagram (Sheet of "CODEC/Head phone")
"R225 = DNP,   R226 = 0R" is presented.

However, the result of examining my "rockpro64" is
"R225 = 10kΩ, R226 = DNP".

Please tell me whether this difference is due to the production lot or just the mistake of the circuit diagram.
*) I think that it is merely a mistake in the circuit diagram.


Question 2)
Connection of headphone-jack = "J16:pj_35A063" is obviously wrong.
*) I think that the top and bottom are connected in reverse.

Please introduce the datasheet of "pj_35A063" or present the correct circuit diagram.
I searched the datasheet for "pj_35A063", but I could not find it.

As for the signal name "HPGND / HPOL / HPOR", its connection relation can be inferred.
However, as for the signal name "PHONE_DET / MIC_IN 2 P",
since the specification of "pj_35A063" is unknown,
it is impossible to infer the correct connection relation.

---
My "rockpro64" is a "RAM=4GB" version, and it arrived in 2018-August.
I think that it is probably the "second batch production" lot.

Your board should be second batch. The ROCKPro64 4GB and 2GB board are identical except LPDDR4 memory configuration.

Thanks your finding, I have feedback to hardware engineer.
#3
Thanks for the reply.

The main point of this question is not looking for any mistakes.

As you may have noticed, currently All "OS-Imgae" can not output sound via "ES8316".

I judged that part of the cause of this issues was included in this part, so I asked.

To be useful to all "rockpro64-OS" developers, I expect you to get accurate answers from you.


Possibly Related Threads…
Thread Author Replies Views Last Post
  Installing Wifi drive for the RockPro64 John45595 0 177 02-10-2024, 11:32 PM
Last Post: John45595
Wink You don't sell case and fan for "ROCKPro64 4GB Single Board Computer"? Clea 1 674 09-17-2023, 12:00 AM
Last Post: tllim
  Want to check maximum toggle speed in Rockpro64 board. kundanjha 0 627 08-14-2023, 07:55 AM
Last Post: kundanjha
  Unable to boot Armbian on new RockPro64 mooseball 5 4,086 07-14-2023, 08:59 AM
Last Post: rockjonn
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 836 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  No sound on Rockpro64 with OpenWrt Patrice 1 1,241 04-06-2023, 02:46 PM
Last Post: Ricks Rockpro
  Cant get rockpro64 working brasilikum 3 1,703 03-19-2023, 06:22 AM
Last Post: runyor
  RockPro64 Stopped working WarpLover 5 2,520 02-06-2023, 10:10 AM
Last Post: diizzy
Lightbulb ROCKPro64 + SSD case model for 3D print Spater 0 959 01-27-2023, 07:43 PM
Last Post: Spater
  RockPro64 and Neon rapier1 2 1,698 10-21-2022, 07:44 AM
Last Post: rapier1

Forum Jump:


Users browsing this thread: 1 Guest(s)