adb connection failed
#1
I can not connect adb using USB-C or TCP.

- Using USB type C to C
    no device

- Using tcp(ping is succeed)
    adb connect 192.168.1.134
    unable to connect to 192.168.1.134:5555: Connection refused

If someone succeeds, please help me.

Thank you!
#2
It works fine for me, check the wiki here.
Note use of the top USB2 port has NOT been verified - looking at the schematic it seems it may in fact be the type 3 USB A port that is OTG. But for sure I have had no problems with the type C port
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#3
I'm also trying to get this working. when I plugged into the USB 2.0 OTG port. nothing happened. I found a type-c to type-a cable and plugged it in. my computer recognized a new device.

I am using adb to sideload gapps from opengapps.org.

however the signature verification failed.
error: 21

it seems to be timing out at around 50% of file transfer.
#4
I have the exact same problem.

adb devices return no device.
adb connect is falling despite that the ping is working.

I did try on android 7 and android 8. I also tried on all usb 2 ports. For usb c, I use a hub c to 3 and connect it to the MacBook pro. Also note that I tried on a MacPro with ubuntu.

lsusb on both machines, never show the rockpro64 :/ and adb is not working.

On the device itself I am developer mode and try all transfer mode possible (MTP, PTP...)

please help!
#5
Actually, I bought a usb c to usb 3 and it works now.


Forum Jump:


Users browsing this thread: 1 Guest(s)