05-03-2018, 09:01 PM
(04-27-2018, 12:32 AM)larsen8989 Wrote: No the vsb comes on just fine but only at .25A then if I hook the ps on to ground and power up the whole all 5v rails only put out .25A and I've done this with 2 separate units and I'm not sure where I'm going wrong.
Sent from my VS995 using Tapatalk
I should also point out as long as powering through Euler it works fine but on my pi and the micro USB on pine with an adapter to the PSU they won't boot.
Sent from my VS995 using Tapatalk
ATX power supply designs for high power and some ATX power supply may not turn on or no function properly if the loading is too light.
