09-03-2022, 11:56 AM
can you provide the manufacturer and model number for the 2x20 pin header that is soldered onto the quartz64 model b?
quartz64 model b 2x20 pin header
|
09-03-2022, 11:56 AM
can you provide the manufacturer and model number for the 2x20 pin header that is soldered onto the quartz64 model b?
10-23-2022, 05:21 AM
(This post was last modified: 10-23-2022, 05:46 AM by CounterPillow.)
I don't know the precise model number, but it's generic 2.54mm spacing, so there's a lot of manufacturers to choose mating connectors from.
If you want a mating connector that stacks (i.e. the pins are long enough to poke out the other side of the PCB), then SSQ-120-03-G-D should fit, but I'm sure there's cheaper options. For example this one looks good for $1, though isn't gold plated. That's all of course assuming you're trying to build a board that plugs into the Quartz64 Model B and were trying to find mating connectors. If not, I apologise for the needless noise. Occasional Linux Kernel Contributor, Avid Wiki Updater, Ask Me About Quartz64 Open Hardware Quartz64 Model A TOSLink Adapter Pi-bus GPIO Extender For ROCKPro64 And Quartz64 Model A Plebian GNU/Linux |
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Quartz64 seeming died | Darin755 | 0 | 101 |
01-19-2024, 07:29 PM Last Post: Darin755 |
|
Quartz64 model a neither booting nor resetting without pressing reset button | aleix | 2 | 1,099 |
08-24-2023, 04:52 AM Last Post: aleix |
|
Thoughts on repairs for a Quartz64-B | beepy | 1 | 721 |
08-02-2023, 05:02 PM Last Post: beepy |
|
Li-Pol QUARTZ64 Model-B vs Model-A | polrus | 1 | 693 |
07-13-2023, 10:36 PM Last Post: tllim |
|
can't get quartz64-A working | jyoung | 14 | 4,144 |
04-29-2023, 04:41 PM Last Post: diederik |
|
Trustzone support for QUARTZ64 | capablegh | 13 | 6,682 |
04-28-2023, 01:58 AM Last Post: NCLI |
|
Booting Quartz64 Model B | Jojo120120 | 14 | 7,274 |
01-23-2023, 03:31 AM Last Post: balbes150 |
|
quartz64 model b 2x20 max power | proj964 | 1 | 1,479 |
10-23-2022, 05:32 AM Last Post: CounterPillow |
|
JTAG/SWD on Quartz64 model A | capablegh | 4 | 4,628 |
10-03-2022, 03:16 PM Last Post: fatalfeel |
|
Trying to get Quartz model A working | fasani | 2 | 2,131 |
09-17-2022, 06:43 AM Last Post: balbes150 |