PinePhone Keyboard
#1
I just got my PinePhone Keyboard and it is a wonderful little computer now.
But I am over my head with setting it up.
I have searched around and found some information like the wiki page.
My first issue is the pine key, it does not do anything and I cannot type -
The other issue is setting up the user-space driver. The wiki has a link to get it but there is no way I can see to download when I go there.
I would really appreciate any help.
Thank you
Silas
  Reply
#2
I am running Manjaro-ARM with KDE Plasma. I just applied all the pending updates and the keyboard started working.
  Reply
#3
I seem to remember that only Arch, Manjaro, Mobian and postmarket OS currently support the keyboard. It says something like that in the pine64 store.
  Reply
#4
(01-24-2022, 04:03 PM)lacriz Wrote: I seem to remember that only Arch, Manjaro, Mobian and postmarket OS currently support the keyboard. It says something like that in the pine64 store.

 I should have said that I am running Mobian bookworm.
  Reply
#5
I installed Mobian on a new sd card yesterday and applied all the updates, then turned off and put the PinePhone into the keyboard case. For me, that worked. Keys mostly seem fine. (Aware of the complaints about the top row, I was prepared to have to press a little harder to get backspace and numbers, and that seems to work.) Haven't tried charging it yet. And in fact ought to get on with some real work today.

Could you try a fresh system on an sd card in case that makes yours work? And check that pogo pins are making connection, of course. I think there were a few people had to use a shim of some sort to ensure they pressed harder ...
  Reply
#6
The keyboard works, it just the Pinekey, when I try to type an ! (pinekey+1) I get a 1.
  Reply
#7
A couple of questions about keys and report of a bug of sorts.

What do the pine cone key (below the Tab key) and the AltG (to the right of the space bar) do? I have tried them with other key combinations to no avail. I was hoping a pine cone + AltG combination shot a powerful laser beam from the torch light on the back of the phone but was sadly disappointed.

A bug: A combination of Fn + 1 should produce a "|" (pipe symbol) but it generates a "\" (backslash) just like a Fn + 2 combination. Maybe there is a fix for this.

Thanks for the responses.

sandspur
  Reply
#8
(01-28-2022, 07:11 AM)sandspur Wrote: A couple of questions about keys and report of a bug of sorts.

What do the pine cone key (below the Tab key) and the AltG (to the right of the space bar) do? I have tried them with other key combinations to no avail. I was hoping a pine cone + AltG combination shot a powerful laser beam from the torch light on the back of the phone but was sadly disappointed.

A bug: A combination of Fn + 1 should produce a "|" (pipe symbol) but it generates a "\" (backslash) just like a Fn + 2 combination. Maybe there is a fix for this.

Thanks for the responses.

sandspur
I believe the pine key is the meta/super key. Altg is alt graph, it types different characters depending on what keyboard layout you're using. Eg - accented letters à, è, ì, ò, ù. 

To get "|" it's shift + fn + 1.
Same for ~ _ + it's just shift + fn + key.

This factory keymap has some details.
  Reply
#9
Thanks for the keyboard guidance, Sloth.

sandspur
  Reply
#10
Received the keyboard today. It is pretty neat. I am using it with the Pinephone running mobian. I shutdown Pinephone, inserted Pinephone into keyboard and then started mobian, Keyboard worked immediately.

The keys are too small for typing with 10 fingers. The most comfortable way to type is by holding the entire device in both hands and typing with two thumbs. I wish there was a shift key on the right side, but I will get used to the one shift key on the left. The absence of a speaker to place next to your ear when the case is closed for a phone call makes using it for phone calls with the case closed is a bit weird. Perhaps a solution is using a bluetooth phone headset.

I like that the hinge can be pushed way back so that the screen is nearly 180 degrees making it easy to see the screen while typing. I also like that the keyboard battery charges the phone. I like that the keyboard supports up, down, left, and right. I like the many key combinations for various characters ans symbols.

A lighted keyboard would be nice if it does not drain the battery much.

Note: A few key combinations do not register the correct symbol, which are the Fn 0 and Fn 2. Will have to figure out how to submit feedback.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Question bluetooth speakers and pinephone pro Supervisor 2 119 3 hours ago
Last Post: Supervisor
  PinePhone Beta Edition will not boot from MicroSD card Timothy_Ecc 27 16,143 Yesterday, 12:20 PM
Last Post: skandigraun
  pinephone keyboard + dock question tuxcall 4 137 01-27-2023, 01:40 PM
Last Post: emsyr
Bug PinePhone modem keeps "disappearing" Kevin Kofler 10 393 01-24-2023, 10:46 AM
Last Post: zetabeta
  PinePhone Beta dead - no boot-related output on serial interface horalocal 0 146 12-25-2022, 08:23 PM
Last Post: horalocal
  PinePhone carrier support in Hungary notramo 7 515 12-14-2022, 12:18 PM
Last Post: notramo
  Unsatisfactory GPS reception on PinePhone? LinAdmin2 52 38,567 09-02-2022, 09:16 AM
Last Post: wibble
  Pinephone Pro vs Volla 22 Uturn 7 1,423 08-31-2022, 02:58 AM
Last Post: linmob
  Mobian and Keyboard tim.senecal 17 6,691 08-10-2022, 02:25 PM
Last Post: MNtinkerer
  Severe screen flicker + occasional ghosting | Pinephone Beta edition legowave440 5 1,793 07-25-2022, 07:35 AM
Last Post: bedtime

Forum Jump:


Users browsing this thread: 1 Guest(s)