PinePhone CAD Models for Design Improvements

[jdmark]

Does anyone have a link to the PinePhone CAD models? I might have a design improvement or two that I would like to implement using CAD and either make a custom part or contribute them directly to the Pine64 PinePhone project. If someone would care to share them I would appreciate it, thank you.

[tophneal]

There are CAD files on the wiki, have you checked those, yet?

[bridadan]

I was only able to find the back cover CAD file (bottom link in the section): https://wiki.pine64.org/PinePhone#Datash...eripherals

I found the exploded view here: http://files.pine64.org/doc/datasheet/pi...%201.0.pdf

I'd especially be interested in a CAD file for component #9, the "Bottom-case". This would make designing attachable peripherals for the pogo pins much easier!

[jdmark]

The part and respective CAD file that I need is labeled "Bottom-case" in the PinePhone diagram which is the actual frame of the phone itself. I'd like to implement a design improvement in the frame to vastly increase it's durability. 

I was hoping one of the developers such as Luke would share the CAD file with me either in this thread or privately so I don't have to order the part from China? It would save me time drawing it in FreeCAD, I won't have to wait 2-4 weeks for it to arrive, and I would only have to make modifications and testing.

[deedend]

I was only able to find the back cover CAD file (bottom link in the section): https://wiki.pine64.org/PinePhone#Datash...eripherals

I found the exploded view do my assignment australia here: http://files.pine64.org/doc/datasheet/pi...%201.0.pdf

I'd especially be interested in a CAD file for component #9, the "Bottom-case". This would make designing attachable peripherals for the pogo pins much easier!

I will check out these files now. Thanks for the links.

What is this URL that appeared in the quote? I can't find it in the original post, so weird
  Annotation 2020-09-08 114455.png (Size: 93 KB / Downloads: 420)