Booklet type / flip case
#1
I'm looking for a booklet type case for my new PinePhone. I'm currently using the hard case and a glass screen protector, but especially the latter I quite dislike. I prefer to click my phone into a leather case and have a flap protect the screen when it's in my pocket.



Does anyone have experience with an existing case for an existing phone in which the PinePhone can be made to fit?
#2
Someone did post a picture and details of the flip case they were using which was apparently a good fit. They cut a hole in the back for the camera. It's somewhere in the forums here, but I'm obviously using the wrong search terms. If you're lucky they'll repost here.
#3
Yeah, I remember that post as well, but I also can't find it any more.


However, I decided making one myself. I used the PINE64 hard case (I have two of them anyway) and a leather pouch-style case for 6" smart phones.

I cut the stitches on the right and bottom, removed the pull cord, and glued the hard case to the leather on the right. Then I cut out the camera and speaker bar holes and used some sanding paper and a black marker to finish them.

It actually looks quite decent, although I'm not great with leather. I can post some pictures tomorrow.

If PINE64 would sell something like this made properly in a factory, I'd definitely buy it. The existing hard case can just be used for it.
#4
So, this is how it turned out. It's not perfect, but it's pretty close to what I hoped it would be.

[Image: attachment.php?aid=1906]

[Image: attachment.php?aid=1907]

[Image: attachment.php?aid=1908]

[Image: attachment.php?aid=1909]


Attached Files
.jpg   IMG_1055.JPG (Size: 294.49 KB / Downloads: 1,811)
.jpg   IMG_1056.JPG (Size: 190.08 KB / Downloads: 1,810)
.jpg   IMG_1057.JPG (Size: 205.27 KB / Downloads: 1,585)
.jpg   IMG_1058.JPG (Size: 228.41 KB / Downloads: 1,772)
#5
(06-15-2020, 07:52 AM)the7thstranger Wrote: So, this is how it turned out. It's not perfect, but it's pretty close to what I hoped it would be.
I like it Smile
#6
@Luke Is there any chance that PINE64 or an affiliate company will make something like this properly in a factory?

I'm really content with the case I made, but it's of course not as nice as one made in a factory, and I'd also like to be able to get more of them without going through this tedious process all the time.

I would happily pay $30~35 for a flip case like this.
#7
(06-27-2020, 12:42 PM)the7thstranger Wrote: @Luke Is there any chance that PINE64 or an affiliate company will make something like this properly in a factory?

I'm really content with the case I made, but it's of course not as nice as one made in a factory, and I'd also like to be able to get more of them without going through this tedious process all the time.

I would happily pay $30~35 for a flip case like this.

For sure it is possible. I'll bring this to TL's attention.
You can find me on IRC, Discord and Twitter


#8
(06-13-2020, 01:29 PM)wibble Wrote: Someone did post a picture and details of the flip case they were using which was apparently a good fit. They cut a hole in the back for the camera. It's somewhere in the forums here, but I'm obviously using the wrong search terms. If you're lucky they'll repost here.


Yes, it was me and I used a cover for the Galaxy Note 8 Plus. I bought it in a shop, but it looks something like this



https://www.ebay.co.uk/itm/For-Samsung-G...SwcBpeJ4sc



Other options to consider are these:



https://www.ebay.co.uk/itm/Samsung-Galax...4dfc7a44cb





https://www.ebay.co.uk/itm/For-Samsung-G...Sw-89eDtiM



I would really prefer a slim case with the front protection the OP descreibed and no stand in order to save some more on the thickness.




I ordered this to try out:

https://www.ebay.co.uk/itm/Case-for-Sams...4dfc7a44cb



but it is no good, falls off the phone.
#9
(06-29-2020, 04:47 AM)Luke Wrote:
(06-27-2020, 12:42 PM)the7thstranger Wrote: @Luke Is there any chance that PINE64 or an affiliate company will make something like this properly in a factory?

I'm really content with the case I made, but it's of course not as nice as one made in a factory, and I'd also like to be able to get more of them without going through this tedious process all the time.

I would happily pay $30~35 for a flip case like this.

For sure it is possible. I'll bring this to TL's attention.
I'm also interested in some kind of bookcase.
Just wonder if it would be possible to find one that match with the phone and with Ubuntu Touch. I mean, if the edges wich have to fix the phone to the case are higher than the screen make a little harder to use gestures from the edges of the phone (like multitasking or take out the drawer).
#10
(06-29-2020, 04:47 AM)Luke Wrote: For sure it is possible. I'll bring this to TL's attention.

Is there any update?

@tllim How do you think about this?


Possibly Related Threads…
Thread Author Replies Views Last Post
  Slip/Zippered Case for PP/KB? jakfish 0 165 03-03-2024, 04:55 PM
Last Post: jakfish
  keyboard case charging but not typing new2pinephone 18 5,209 02-19-2024, 07:30 AM
Last Post: theResonant
  Case for Pinephone totilele 12 6,517 11-04-2023, 09:43 AM
Last Post: Negome
  Getting all keys working on pine phone keyboard-case undata 5 2,307 10-08-2023, 12:19 PM
Last Post: mburns
  PinePhone Wallet Case Shane 5 4,807 09-17-2023, 12:52 PM
Last Post: J T
  pinephone keyboard case how to use the = f8 - etc tuxcall 3 1,654 05-02-2023, 05:18 PM
Last Post: undata
  Using Keyboard Case with Mobian (complete instructions) Megamemnon 4 4,764 03-22-2023, 01:47 PM
Last Post: vgnmnky
  Otterbox case for PinePhone car46999 5 3,021 11-18-2022, 09:08 PM
Last Post: car46999
  A Pinephone case that'll actually prevent the screen from cracking mil 24 15,963 11-18-2022, 02:18 PM
Last Post: mil
  Pinephone (Pro) Keyboard Case for sale manubert 0 891 09-17-2022, 11:51 AM
Last Post: manubert

Forum Jump:


Users browsing this thread: 1 Guest(s)