GPIO performance 100x slower compared to Raspberry Pi 3
#1
Has anybody else observed this issue?

I am trying to get the Blinkit LED SPI Device to work with the RockPro64.
https://cpldcpu.wordpress.com/2014/11/30...-superled/ 
https://shop.pimoroni.com/products/blinkt


I have noticed that the Python GPIO library's  under Raspberry Pi 3 seem to run 100 times faster than can be achieved under RockPro64.

While a clock pulse under RockPro64 takes 600us a clock pulse under Raspberry Pi takes 8-8us.
This is using the same blinkit example code on both devices.

Does anybody know if Raspberry Pi 3 uses a better performing solution than the /sys/class/gpio interface for programming the GPIO than  the rockpro64 ? The rockPro64 is just too slow!

The only reason I think I can not get the blinkit LED to work on the RockPro64 it because its 100 ties slower than the Raspberry Pi 3 GPIO

You can see the oscilloscope scans below


https://imgur.com/FsgX2Io  RockPro64
https://imgur.com/dRBZcjK  Raspberry Pi 3


https://imgur.com/tagotFq  RockPro64
https://imgur.com/pywieqS Raspberry Pi 3


Messages In This Thread
GPIO performance 100x slower compared to Raspberry Pi 3 - by axelf - 03-22-2019, 03:31 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  GPIO on the RockPro64 - all pins high? colinmarc 2 1,524 11-18-2022, 10:20 AM
Last Post: colinmarc
  GPIO Expander HAT for ROCKPro64 and Quartz64 CounterPillow 7 5,192 07-18-2022, 10:05 PM
Last Post: zer0sig
  Using GPIO interrupts antonlyap 3 3,601 06-30-2021, 01:32 PM
Last Post: antonlyap
  GPIO in sleep mode Mentaluproar 2 3,293 04-08-2019, 03:50 PM
Last Post: Mentaluproar

Forum Jump:


Users browsing this thread: 1 Guest(s)