04-03-2019, 10:17 PM
(04-03-2019, 08:36 AM)burglar_ot Wrote: I use the same procedure on Rock64 and Pine64 LTS without any issue, so it seems strange. The UDP checksum is very suspicious for me and it seems related to the TFTP Server. I have to say that I had tons of problems with all the TFTP Server I tried except the one written in Python. What are you using as TFTP?
Ok, tried "py3tftp", the similar issue.
Code:
TFTP from server 192.168.120.100; our IP address is 192.168.120.101
Filename 'pxelinux.cfg/01-22-62-24-29-72-b4'.
Load address: 0x600000
Loading: #
21.5 KiB/s
done
Bytes transferred = 496 (1f0 hex)
Config file found
1: rock64
missing environment variable: bootfile
Retrieving file: boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387
Speed: 1000, full duplex
Using ethernet@ff540000 device
TFTP from server 192.168.120.100; our IP address is 192.168.120.101
Filename 'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387'.
Load address: 0x4000000
Loading: # UDP wrong checksum 00000800 0000d1d3
UDP wrong checksum 00000800 0000d1d3
UDP wrong checksum 00000810 0000d1d3
UDP wrong checksum 00000008 0000d12d
UDP wrong checksum 00000008 0000d12d
UDP wrong checksum 00000008 0000d12d
UDP wrong checksum 00000008 0000d12d
UDP wrong checksum 00000800 0000cf27
UDP wrong checksum 00003008 00009c6e
UDP wrong checksum 00001808 0000602f
UDP wrong checksum 00001810 0000602f
UDP wrong checksum 00001010 00007979
UDP wrong checksum 00001008 00007979
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
UDP wrong checksum 00000008 00006dd2
T T T Tin tftp verbose mode from server side when start boot rock64 via PXE I see next:
Code:
root@rock64:/var/lib/tftpboot# python3 -m py3tftp -p 69 -v
2019-04-04 04:08:47,698 [INFO] Starting TFTP server on 0.0.0.0:69
2019-04-04 04:08:47,699 [DEBUG] Using selector: EpollSelector
2019-04-04 04:08:47,702 [INFO] Listening...
2019-04-04 04:09:16,246 [DEBUG] received: C0A87865.imgoctettimeout5blksize1468
2019-04-04 04:09:16,247 [DEBUG] Request: b'C0A87865.img\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,249 [DEBUG] b'timeout'
2019-04-04 04:09:16,250 [DEBUG] b'blksize'
2019-04-04 04:09:16,251 [DEBUG] packet type: RRQ
2019-04-04 04:09:16,253 [DEBUG] Request: b'C0A87865.img\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,255 [DEBUG] b'timeout'
2019-04-04 04:09:16,256 [DEBUG] b'timeout'
2019-04-04 04:09:16,257 [DEBUG] b'blksize'
2019-04-04 04:09:16,258 [DEBUG] b'blksize'
2019-04-04 04:09:16,259 [INFO] Initiating RRQProtocol with ('192.168.120.101', 3482)
2019-04-04 04:09:16,261 [DEBUG] Initializing file transfer to ('192.168.120.101', 3482)
2019-04-04 04:09:16,263 [DEBUG] Set protocol attributes as {b'ack_timeout': 0.5, b'timeout': 5.0, b'blksize': 1468, b'windowsize': 1}
2019-04-04 04:09:16,264 [ERROR] File "b'C0A87865.img'" does not exist!
2019-04-04 04:09:16,265 [DEBUG] opening pkt: <py3tftp.tftp_packet.TFTPErrPacket object at 0x7f9a9dcfd0>
2019-04-04 04:09:16,267 [INFO] Closing connection to ('192.168.120.101', 3482) due to error. "b'C0A87865.img'" Not transmitted.
2019-04-04 04:09:16,269 [INFO] Connection to 192.168.120.101:3482 terminated
2019-04-04 04:09:16,372 [DEBUG] received: pxelinux.cfg/01-22-62-24-29-72-b4octettimeout5blksize1468
2019-04-04 04:09:16,372 [DEBUG] Request: b'pxelinux.cfg/01-22-62-24-29-72-b4\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,373 [DEBUG] b'timeout'
2019-04-04 04:09:16,374 [DEBUG] b'blksize'
2019-04-04 04:09:16,374 [DEBUG] packet type: RRQ
2019-04-04 04:09:16,377 [DEBUG] Request: b'pxelinux.cfg/01-22-62-24-29-72-b4\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,378 [DEBUG] b'timeout'
2019-04-04 04:09:16,379 [DEBUG] b'timeout'
2019-04-04 04:09:16,380 [DEBUG] b'blksize'
2019-04-04 04:09:16,381 [DEBUG] b'blksize'
2019-04-04 04:09:16,383 [INFO] Initiating RRQProtocol with ('192.168.120.101', 3609)
2019-04-04 04:09:16,385 [DEBUG] Initializing file transfer to ('192.168.120.101', 3609)
2019-04-04 04:09:16,386 [DEBUG] Set protocol attributes as {b'ack_timeout': 0.5, b'timeout': 5.0, b'blksize': 1468, b'windowsize': 1}
2019-04-04 04:09:16,388 [DEBUG] opening pkt: <py3tftp.tftp_packet.TFTPOckPacket object at 0x7f9a9dcfd0>
2019-04-04 04:09:16,395 [INFO] Connection to 192.168.120.101:3609 terminated
2019-04-04 04:09:16,499 [DEBUG] received: boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387octettimeout5blksize1468
2019-04-04 04:09:16,500 [DEBUG] Request: b'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,501 [DEBUG] b'timeout'
2019-04-04 04:09:16,503 [DEBUG] b'blksize'
2019-04-04 04:09:16,504 [DEBUG] packet type: RRQ
2019-04-04 04:09:16,506 [DEBUG] Request: b'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387\x00octet\x00timeout\x005\x00blksize\x001468\x00'
2019-04-04 04:09:16,508 [DEBUG] b'timeout'
2019-04-04 04:09:16,509 [DEBUG] b'timeout'
2019-04-04 04:09:16,510 [DEBUG] b'blksize'
2019-04-04 04:09:16,511 [DEBUG] b'blksize'
2019-04-04 04:09:16,512 [INFO] Initiating RRQProtocol with ('192.168.120.101', 3736)
2019-04-04 04:09:16,514 [DEBUG] Initializing file transfer to ('192.168.120.101', 3736)
2019-04-04 04:09:16,516 [DEBUG] Set protocol attributes as {b'ack_timeout': 0.5, b'timeout': 5.0, b'blksize': 1468, b'windowsize': 1}
2019-04-04 04:09:16,517 [DEBUG] opening pkt: <py3tftp.tftp_packet.TFTPOckPacket object at 0x7f9a9dcef0>
2019-04-04 04:09:28,057 [DEBUG] Ack: b'\x00\x04\x00\n'; is_ack: True; counter: 11
2019-04-04 04:09:28,058 [ERROR] Connection to ('192.168.120.101', 3736) timed out, "b'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387'" not transfered
2019-04-04 04:09:28,060 [INFO] Connection to 192.168.120.101:3736 terminatedAlso, I tested get file (via this tftp) from other remote board, no issues and in tftp log I see next:
Code:
2019-04-04 04:16:13,732 [DEBUG] received: boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387netascii
2019-04-04 04:16:13,733 [DEBUG] Request: b'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387\x00netascii\x00'
2019-04-04 04:16:13,735 [DEBUG] packet type: RRQ
2019-04-04 04:16:13,737 [DEBUG] Request: b'boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387\x00netascii\x00'
2019-04-04 04:16:13,739 [INFO] Initiating RRQProtocol with ('192.168.120.5', 52327)
2019-04-04 04:16:13,741 [DEBUG] Initializing file transfer to ('192.168.120.5', 52327)
2019-04-04 04:16:13,742 [DEBUG] Set protocol attributes as {b'ack_timeout': 0.5, b'timeout': 3.0, b'blksize': 512, b'windowsize': 1}
2019-04-04 04:16:13,744 [DEBUG] opening pkt: <py3tftp.tftp_packet.TFTPDatPacket object at 0x7f9a9dcfd0>
2019-04-04 04:16:36,251 [INFO] Connection to 192.168.120.5:52327 terminatedand I received the same file (the same side) via tftp.
so, no idea why it's happening and not working
