I just received a series of RP64 units from AmeriDroid.
I placed one into the NAS case with Armbian on a 32GB eMMC chip. Boots properly and finalizes the install. Ran through updates and all seems well.
Moved the eMMC chip to the second board - nothing but the green power LED on power up.
Moved the eMMC chip to the third board - nothing but the green power LED on power up.
I've attempted the POWER-RESET gambit on both non-booting boards.
I've returned the eMMC chip to the first board and all is fine.
Removed the boards from the NAS enclosures, same result.
Burned a 32GB µSD card with the same Armbian image and jumpered the eMMC disable jumper
Still power LED, but nothing else.
Are there some bad boards out there?
I placed one into the NAS case with Armbian on a 32GB eMMC chip. Boots properly and finalizes the install. Ran through updates and all seems well.
Moved the eMMC chip to the second board - nothing but the green power LED on power up.
Moved the eMMC chip to the third board - nothing but the green power LED on power up.
I've attempted the POWER-RESET gambit on both non-booting boards.
I've returned the eMMC chip to the first board and all is fine.
Removed the boards from the NAS enclosures, same result.
Burned a 32GB µSD card with the same Armbian image and jumpered the eMMC disable jumper
Still power LED, but nothing else.
Are there some bad boards out there?