PINE A64 LTS (Prakash) - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64-LTS / SOPINE Compute Module (https://forum.pine64.org/forumdisplay.php?fid=66) +--- Forum: Linux on PINE A64-LTS / SOPINE (https://forum.pine64.org/forumdisplay.php?fid=69) +--- Thread: PINE A64 LTS (Prakash) (/showthread.php?tid=7168) |
PINE A64 LTS (Prakash) - danpurprakash@gmail.com - 02-14-2019 Hi All, I have one pine A64 LTS device. I downloaded BSP for u-boot to compile and boot the u-boot in the device but I have no steps to compile the u-boot. I downloaded BSP from this below link provided by pine. http://wiki.pine64.org/index.php/SOPINE_Software_Release Can anyone help me providing the complete steps to compile 1) is this the right BSP i downloaded from the shared link. 2) need the procedure to enable the BSP in u-boot. 3) Steps to compile the u-Boot with the required BSP. 4) steps required to load the u-boot image into the board. Please help me as i am new to this environment Thanks Prakash |