+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: Rock64 Login (/showthread.php?tid=6613)
Rock64 Login - lpninja - 10-01-2018
Hi everyone!Nice to meet you.
I have a Rock64 v2.0, 20170713
I installed:
Armbian_5.59_Rock64_Debian_stretch_default_4.4.152_desktop.img using the Etcher flasher on microSD.
The first time I insert the flashed microSD card into the Rock64 i eventually get a login prompt asking for user.
I write in user: root and press enter.
There is now no response or it hangs for a long time and I don't get the password prompt.
Then I press reset on the Rock64 board and after a while i do get some text on the screen, mainly hexadecimals and addresses cycling through, then the screen goes black. This goes on an infinite repeat loop.
I have a keyboard and mouse plugged in and wired Ethernet.
Does anyone have this or am I approaching this the wrong way?
Many thanks,
luke
RE: Rock64 Login - tllim - 10-04-2018
(10-01-2018, 10:24 PM)lpninja Wrote: Hi everyone!Nice to meet you.
I have a Rock64 v2.0, 20170713
I installed:
Armbian_5.59_Rock64_Debian_stretch_default_4.4.152_desktop.img using the Etcher flasher on microSD.
The first time I insert the flashed microSD card into the Rock64 i eventually get a login prompt asking for user.
I write in user: root and press enter.
There is now no response or it hangs for a long time and I don't get the password prompt.
Then I press reset on the Rock64 board and after a while i do get some text on the screen, mainly hexadecimals and addresses cycling through, then the screen goes black. This goes on an infinite repeat loop.
I have a keyboard and mouse plugged in and wired Ethernet.
Does anyone have this or am I approaching this the wrong way?
Many thanks,
luke
You can try out ayufan Bionic LXDE build, https://github.com/ayufan-rock64/linux-build/releases/, and check whether has similar issue.
You also can post your post at Armbian forum and somebody experience with Armbian build may able to provide better answer.