+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: POT modules (https://forum.pine64.org/forumdisplay.php?fid=8)
+---- Thread: Z-wave module compatibility? (/showthread.php?tid=479)
Z-wave module compatibility? - Yomet - 03-23-2016
Hi,
I am wondering if the Z-wave module developed for the PINE will work on a Raspberry PI B+/2/3?
Thx
RE: Z-wave module compatibility? - tllim - 03-23-2016
(03-23-2016, 06:51 AM)Yomet Wrote: Hi,
I am wondering if the Z-wave module developed for the PINE will work on a Raspberry PI B+/2/3?
Thx
The Pine64 ZWave module loaded with Sigma Designs official ZWave stack (not open Zwave stack or Razberry stack) due to our partner has proper licensing agreement with Sigma Designs. If the home automation software runs on RPi that able to issue standard ZWave API command, then our card will work.
RE: Z-wave module compatibility? - Yomet - 03-23-2016
(03-23-2016, 09:22 AM)tllim Wrote:(03-23-2016, 06:51 AM)Yomet Wrote: Hi,
I am wondering if the Z-wave module developed for the PINE will work on a Raspberry PI B+/2/3?
Thx
The Pine64 ZWave module loaded with Sigma Designs official ZWave stack (not open Zwave stack or Razberry stack) due to our partner has proper licensing agreement with Sigma Designs. If the home automation software runs on RPi that able to issue standard ZWave API command, then our card will work.
Thank you very much for that answer. It explains perfectly what I wanted to know.
Yomet