+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+--- Thread: [30/11/2016] pine64-config (/showthread.php?tid=1855)
Pages:
1
2
[30/11/2016] pine64-config - Terra854 - 07-25-2016
Pine A64 Configuration Tool [30/11/2016]
This tool is based on the raspi-config tool for the Raspberry Pi and it provides a straight-forward way to configure your Pine64.
Source code is available at https://github.com/Terra854/pine64-config
Prerequisites
You will need to have the xterm package installed in order to use this tool. You will also need to install newt (for openSUSE) or whiptail (for Debian/Ubuntu).
Note that for openSUSE, the tool and it's dependencies has been preloaded in the images.
Downloads
Github link
Installation/Update the tool
To install or to update this tool for your Pine64, you will need to run the following command:
Code:
sudo ./install.sh [ubuntu/debian/opensuse]This will build the scripts that is relevant to your distribution of Linux and installs it to /usr/local/sbin.
Once it is installed, you can execute it with:
Code:
sudo pine64-config.shEnjoy!
Changelog
25/7/2016
- Initial Release
26/7/2016
- Added Debian support
2/8/2016
- Minor bugfix
3/10/2016
- Lot's of bug fixes and improvements.
- openSUSE is now supported.
- Added the ability to change the cpu governor
- Added a heath monitor (looping the pine64_health script)
6/10/2016
- Major bugfixes
30/11/2016
- Fixed the cpu governor feature
If you want to contribute or to file bugs, please feel free to post an issue or open a pull request on the GitHub page.
RE: [BETA][25/7/2016] pine64-config - Luke - 07-25-2016
Very cool - Will give it a spin right away
RE: [BETA][26/7/2016] pine64-config - tllim - 07-25-2016
(07-25-2016, 08:46 AM)Terra854 Wrote: Pine A64 Configuration Tool [26/7/2016]
This tool is based on the raspi-config tool for the Raspberry Pi and it provides a straight-forward way to configure your Pine64.
Source code is available at https://github.com/Terra854/pine64-config
Prerequisites
You will need to have whiptail installed in order to use this tool (sudo apt-get install whiptail).
Installation
To install this tool for your Pine64, you will need to run the following command:
Code:sudo ./install.sh
This will build the scripts that is relevant to your distribution of Linux and installs it to /usr/local/sbin.
Once it is installed, you can execute it with:
Code:sudo pine64-config.sh
Enjoy!
Changelog
25/7/2016
- Initial Release
26/7/2016
- Added Debian support
Do note that this tool is in the beta stage. As such, this tool may not work as expected. If you want to contribute or to file bugs, please feel free to post an issue or open a pull request on the GitHub page.
Also, openSUSE support will soon be implemented in the coming weeks (You will get an error if you try to build the tool for it).
Thanks on the configuration tool and looking forward on the openSuse release.
RE: [BETA][26/7/2016] pine64-config - vinodmenon80 - 07-25-2016
That's a very nice idea mate...
Configuring the Pine64 with a similar tool to the Raspi.
This should be rather interesting to see if we can incorporate this into the next build.
Or we can try and include this and test it from our end before it goes into the next build.
Would this system work in Virtual machine? I mean the whole shebang?
Cheers,
vinodmenon80
RE: [BETA][26/7/2016] pine64-config - Ophir - 07-29-2016
Thank you!
But I couldn't install it
Code:
ERROR: No arguments specified (ubuntu, debian or opensuse)And again,
THANK YOU!
(Sorry about my poor English)
RE: [BETA][26/7/2016] pine64-config - Terra854 - 07-31-2016
(07-29-2016, 10:43 AM)Ophir Wrote: Thank you!
But I couldn't install it
You would know how to solve it?Code:ERROR: No arguments specified (ubuntu, debian or opensuse)
And again,
THANK YOU!
(Sorry about my poor English)
All you need to do is to type which distribution you are using (ubuntu, debian or opensuse) after the ./build.sh. (Eg. "./build.sh ubuntu" for Ubuntu). Do note that openSUSE is not supported at the moment, but it is there as a placeholder as I will be supporting it in a future release.
RE: [BETA][2/8/2016] pine64-config - Bart333 - 08-18-2016
Doesn't work for me on lastest debian image. Did all steps and when i type sudo pine64-config.sh nothing happens.
RE: [BETA][2/8/2016] pine64-config - Terra854 - 08-24-2016
(08-18-2016, 03:05 PM)Bart333 Wrote: Doesn't work for me on lastest debian image. Did all steps and when i type sudo pine64-config.sh nothing happens.
Just wondering, is the script located at /usr/local/sbin? Are there any error messages printed out after you ran it?
RE: [BETA][2/8/2016] pine64-config - Terra854 - 10-02-2016
Hello everyone,
This tool has now been updated with a few new features.
Changelog:
- Lot's of bug fixes and improvements.
- openSUSE is now supported.
- Added the ability to change the cpu governor
- Added a heath monitor (looping the pine64_health script)
Links are on the first post.
RE: [6/10/2016] pine64-config - Terra854 - 10-06-2016
Hey guys, I have just uploaded an important bug fix to the repository. Please update your pine64-config tool to the latest version.
Links are in the first post.