PINE64
How to build the lichee and Android-5.1.1 SDK@PINEA64 board. - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Android on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=5)
+--- Thread: How to build the lichee and Android-5.1.1 SDK@PINEA64 board. (/showthread.php?tid=1649)



How to build the lichee and Android-5.1.1 SDK@PINEA64 board. - SuperX - 07-05-2016

Hello,

Download these 2 packages from this linking(http://wiki.pine64.org/index.php/Pine_A64_Software_Release).

       Linux BSP 2.0 Is Anyone able to provide the correct build step of lichee/android for the PINEA64 board ?
A little bit....about this selection term....That's saying....how to build image by myself as PINEA64 prebuilt image file ?

(1) Kernel image...which one is for PINEA64 board configuration ???
All available boards:
   0. fpga
   1. p1
   2. perf1_v1_0
   3. perf2_v1_0
   4. perf3_v1_0
   5. Sanggeer-1019q5
   6. t1
   7. t1_v1
Choice: ????
(2) Android-- Lunch menu... pick a combo:
Lunch menu... pick a combo:
     1. aosp_arm-eng
     2. aosp_arm64-eng
     3. aosp_mips-eng
     4. aosp_mips64-eng
     5. aosp_x86-eng
     6. aosp_x86_64-eng
     7. aosp_flounder-userdebug
     8. mini_emulator_x86_64-userdebug
     9. mini_emulator_mips-userdebug
     10. m_e_arm-userdebug
     11. mini_emulator_x86-userdebug
     12. mini_emulator_arm64-userdebug
     13. aosp_flo-userdebug
     14. tulip_p1-eng
     15. tulip_p1-user
     16. astar_h7-eng
     17. astar_h7-user
     18. astar_y3-eng
     19. astar_y3-user
     20. octopus_n1-eng
     21. octopus_n1-user
     22. octopus_ibt-eng
     23. octopus_ibt-user
     24. astar_yh-eng
     25. astar_yh-user
     26. jasmine_perf-eng
     27. jasmine_perf-user
     28. octopus_perf-eng
     29. octopus_perf-user
     30. octopus_f1-eng
     31. octopus_f1-user
     32. kylin_p2-eng
     33. kylin_p2-user
     34. kylin_p1-eng
     35. kylin_p1-user
     36. tulip_t1-eng
     37. tulip_t1-user
     38. tulip_perf-eng
     39. tulip_perf-user
     40. aosp_manta-userdebug
     41. aosp_shamu-userdebug

Which would you like? [aosp_arm-eng] ???


RE: How to build the lichee and Android-5.1.1 SDK@PINEA64 board. - mikey0000 - 07-07-2016

tulip eng I believe so the kernel will be p1 or t1, I have a 5.1.1 image and its listed as tulip


RE: How to build the lichee and Android-5.1.1 SDK@PINEA64 board. - SuperX - 07-11-2016

(07-07-2016, 03:50 AM)mikey0000 Wrote: tulip eng I believe so the kernel will be p1 or t1, I have a 5.1.1 image and its listed as tulip

So...Did you build the image file of this PINEA64-Android5.1.1 SDK by yourself?
Try to use your building image to booting at PINEA64. Whether it's the full the same function as
PINEA64 prebuilt image, or not?

My side built image was not able to boot up well.