Shonky laser cut phone stand - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120) +--- Forum: PinePhone Hardware (https://forum.pine64.org/forumdisplay.php?fid=122) +--- Thread: Shonky laser cut phone stand (/showthread.php?tid=14192) |
Shonky laser cut phone stand - bonce - 06-13-2021 Oi Oi good people. I made this: Its a bit odd looking as I had to account for a nasty generic case I found on ebay: https://ebay.us/h771oU (moto g6 play in black) Also it uses a right angled usb c adapter for the convergence dock: https://www.amazon.co.uk/dp/B07M75JXS1/ref=cm_sw_em_r_mt_dp_K2VVFFAWA9076ZZ3V0J2?_encoding=UTF8&psc=1 I'm still fighting with the convergence dock at the moment, the only way I can get it to display on a connected monitor is with the OS's in Megi's 17 distro image on a tfcard, or from an un-upgraded os fresh from download, so the right angled adapter might not be a great idea. Anyway, if you wanted to make your own, here's the SVG's: http://headstrong.solutions/Projects/pinephone_holder/cut_4.svg http://headstrong.solutions/Projects/pinephone_holder/cut_5.svg http://headstrong.solutions/Projects/pinephone_holder/cut_6.svg My plywood is 3.5mm so that's the length and widths of the tongues and tongue holes (there's probably a better name, but I don't know what it is) RE: Shonky laser cut phone stand - KC9UDX - 06-13-2021 Tongue and tongue holes = tenon and mortises. |