PINE64
Vertical Grey Bars on PBP Reboot - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112)
+--- Thread: Vertical Grey Bars on PBP Reboot (/showthread.php?tid=11731)



Vertical Grey Bars on PBP Reboot - MickTheGeek - 10-05-2020

Hello! 

I was wondering if anyone had a solution to this issue.  My PBP is running Manjaro 20.08 and when I reboot the machine I get vertical gray bars in the center of the screen. I've seen a couple posts that mention this issue, but I have not seen a solution.  If anyone knows of a solution, please point me in that direction.  Thanks a bunch.

/Michael Biel


RE: Vertical Grey Bars on PBP Reboot - as400 - 10-05-2020

Just do a full shutdown and then power on the machine.
Don't use reboot.
There is a kernel patch that should resolve this in the future.


RE: Vertical Grey Bars on PBP Reboot - MickTheGeek - 10-05-2020

(10-05-2020, 02:44 AM)as400 Wrote: Just do a full shutdown and then power on the machine.
Don't use reboot.
There is a kernel patch that should resolve this in the future.

OK.  Thanks for the reply.

/Mike